BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Cut protection and contact heat protection up to 100°C (15 sec) with unique design at the hand so that the sleeve stays in place and does not curl up.
Grey metal safety glasses in classic pilot design with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. Double nose bridge for extra strength. Adjustable nose pads and adjustable temples. The side protection in clear polycarbonate and riveted.
Durable gloves for all extended tasks in cold conditions. 3/4 nitrile coating on seemless polyester lining. Completlely lined with acryl. Sizes: 7 / 8 / 9 / 10 / 11.
High shoe in velours, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF, SRC antislip, oil and carburant resistant. Removable, perforated insole with PU and Elastopan layer for reducing pressure points and stress, while standing and running for a long time. 100% metalfree. Sizes: 35-48.
Earmuff X2 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 31dB.
Heat resistant safety helmet made of fibreglass reinforced polyester. The high-quality helmet maintains its shape to 500 °C and has a 6-point textile suspension, leather sweatband and wheel ratchet. Available in: white, yellow, blue, red, green, orange.
Grey metal safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. Adjustable nose pads and adjustable temples. The side protection in clear polycarbonate and riveted.
Very comfortable half-mask made of silicone rubber, fully maintainable. Fitted with adjustable head and neck bands for precise adjus tment of the mask. Half-mask can also be combined with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6 057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fil ter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used.
Blue fitover safety glasses with pressure-free fit. Very light, fits over most prescription glasses. Frame in synthetic material and clear polycarbonate lenses with integrated side shields. The innovative temple concept makes use of Uvex X-stream technology for an excellent, non-slip fit and a wide range of applications. Protects against dust and chemical spatters. With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean. general industrial applications.
Work trousers with hidden zipper, 2 inset side pockets, 2 back pockets with flap, ruler pocket with flap, thigh pocket with flap, knee pockets, extra insertion at the crotch to prevent tearing, reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: 44-66, lengths 14-57 and belly sizes 24-29. Available colors: Black / gray, corn blue / navy, gray / red and gray / blue.
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Modern safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. Adjustable temples. Side protection in clear polycarbonate.
Offshore safety boot in brown full grain leater with steel toecap and antiperforation midsole. Fitted with a fur lining and insole in molton/fur. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non- slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: 37-49.
Full facial mask in very comfortable and high quality elastomer. Anti- vapor Polycarbonate visor with wide field of view. Fitted with EasyLock connection on the side of the mask for filters with similar connections: serie 9000. Without speaking membrane. The harness opens very widely, which makes it easy to put on the mask. Weight: 360g.
Overshoes, Micromax, elastic, PVC non-slip sole. Suitable for : agricultural and food industry. Colours: white. Sizes: XL= 31cm.
Duolens glasses with modern fashion-look. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with twist temple technology for a perfect and non-slip fit. Polycarbonate lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to filter material that is added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. Frame: black/green.
Trousers, Kingsmill, 65% polyester, 35% cotton, 245 gr/m², multiple pockets with flap and velcro. No PPE
Low shoe recyclable in black full grain leather with steel toecap and antiperforation mid-sole. Sole in PU/PU, and insole in sanitized leather. Sizes: 35-49, D-XD. All materials are re-usable and shoe is fully dismantable.
These reusable earplugs are an ideal alternative to otoplastics for personnel who are only temporarily exposed to noise or for temporary personnel who work under noisy conditions. The Comfoor Parttime includes a unique filter that filters out all the harmful noises, without completely blocking the ear. As a result, conversations and sounds from the surroundings remain audible and there is no sense of vertigo. It is made of skin-friendly, durable silicone material that easily conforms to the ear. The result is a good seal and superb wearing comfort. Thanks to the unique design and special grip, the Comfoor Parttime is easy to place in the ear and to remove. Can be optionally fitted with a cord with clothing clip. Available in: green.
Safety glasses with transparent frames with anti-slip arms and anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-vapour layer. Free glasses cord.
Microfleece jacket with raglan sleeves for greater freedom of movement. Chin guard to prevent chafing. Patch breast pocket with zip. Front pockets with concealed zip. Two inner pockets. Quality: 100% polyester. Available sizes: XS-5XL. Available colours: Red, sky blue, navy, green, grey and black.
Full grain leather boot with a perforated protective toecap made of polymer and Flextane antiperforation midsole. Fitted with two pull loops on the boot for easy donning. The Softane two-component sole with lugs provides better protection against slipping and is not affected by contact with oils and hydrocarbons. The shoe provides good shock absorption. Sizes: 35-48.
Flame retardant, anti-static fleece, double sided fleece: 54% protex/34,2% coton/10% nylon/1,8% AST; 310 g/m², soft fleece material, good cold protection, breathable, can be zipped into different jackets, anti-pilling treatment, Stitched seams, straight collar, zip closure under flap with touch <(>&<)> close fastening, 2 inset pockets with zip closure, round inset sleeves, elasticated cuffs, elastic drawstring in hem , 1 inside pocket .
High shoe in waterrepellent black full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF, SRC antislip, oil and carburant resistant. Removable, perforated insole with PU and Elastopan layer for reducing pressure points and stress, while standing and running for a long time . 100% metalfree. Sizes: 35-48.
Low shoe in waterresistant white Lorica, with a metal free 200J toecap.Fitted with an abrasion resistant breathable liner in Texelle. Outsole in double density PU. 100% metal free. Sizes: 36-48. Weight: 445g. FO SR.
High-quality cowgrain leather gloves. The 10 cm rubber-impregnated cotton protective cuff offers extra protection to the wrist and lower arm. Sizes: 9, 10, 11.
Finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 250°C for 15 sec. Gloves GS industry.
Dark gray metal safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. The side protection in clear polycarbonate and riveted. Separate matching pouch available.
High-cut basic safety shoe S3 in leather with a steel safety toecap and antiperforation midsole. Cambrelle lining and synthetic PU t ongue. Padded ankle protection, gusseted closure. PU/PU walking sole: suple and lightweight, oil resistant.
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Half nitrile coating on the palm with sand grain finish for extra grip. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.D.P
Dust mask, class P3, for toxic dust. Mask with seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 50.
Completely seamless gloves made of nylon with polyurethane coating on the palm. Extremely high wear comfort due to breathability, perfect fit and optimal tactility. Available in: white, grey. Sizes: 7 / 8 / 9 / 10 / 11 / 12.
Laces, black in polyester. Length: 150cm. No PPE.
Blue safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. Comfortable nose bridge. Integrated side, bottom and top protection with indirect ventilation.
Classic fitover glasses with unlimited field of vision. Soft temples (DCT) adjustable in length. Fitted with clear polycarbonate lens that provides 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean. EN166/170 2-1.2.
"Parka, Gore Tex Pyrad TM Fabric Technology, 2-layer laminated in polyester, waterproof, windproof, breathable (WWB). This parka combinest this WWB principle with the highest protection against heat and flame. Permanently anti-static technology. Industrial laundry at 60°C. Available sizes: S-4XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Trousers Diablo Multinorm: - 2 front pockets; - 2 back pockets; - 1 thigh pocket; - 1 meter bag; - knee pockets with cobra finnish. - Stretch elements M-Move - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Gray / black and gray / yellow and navy/yellow Compliant with: EN 1149-5, IEC 61482-2 class 1, EN13034 tye 6, EN ISO 11611 class 1, EN ISO 11612 and EN 14116.
Blue overall polyethylene film having a thickness of 50 microns. The coverall has a fixed hood, back ventilation and elastic in the waist, the wrists and ankles.
Impact resistant glove with cut-resistant liner and nitrile coating. Sizes: 7 (s)- 12 (3xl)
Standard insole for shoes EMMA. Absorbing and drying quickly, antistatic, against odours and moisture, antibacterial. No PPE.
Sock Mikado in flameretardant and antibacterial material. Heel and toe in flex line material with "massage relief", and fitted with extra sponge material. With marking Left and Right. Composition: 35% wool, 35% viscose, 18% polyamid, 11% cordura, 1% elastan.
This insole serves for effective shock absorption at too high longitudinal vault.
High ranger shoe Renzo in cowhide leather with metal toecap and synthetic anti-perforation sole. PU / PU sole, with added PU raised toecap. Fully padded water-tongue. Anatomically shaped insole in warm fleece, and lining in wool. Protects the foot from heat loss. The padded collar in the shoe ensures good stability and support. The integrated reflective material offers additional safety through better visibility even in adverse weather and light conditions. Sizes: 36-50.
Low shoe entry model in black microfibre with plastic 200J toecap. Lining in breathable and antibacterial textile. Sole in PU / PU.
Low shoe in black split leather, with non-metallic antiperforation midsole and 200J toecap. Fitted with a breathable SanyDry liner. Outsole in PU/PU. Antistatic. Sizes: 36-48.
Lamp with 3 distinct beam shapes that can be oriented (45°). Adjustableand washable elastic headband. Easy to wear on the head or di rectlymountable on a helmet. Large rotating selector button with differentmodes facilitates manipulation with gloves. Lumens in close-work modus: 30, in- motion modus: 40, long range vision modus: 50. Waterproof: 1m for 30min. Weight: 160g.
Practical plastic hearing protector (di-electric) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Polyethylene marker tape to clearly demarcate a danger zone. Delivered in a handy, cardboard carrying box. Width: 8 cm, length: 500 m. Colour: red/white.
High shoe in grey water resistant full grain leather, with a non-metallic anti-perforation sole and a steel 200J toecap. Featuring a breathable, abrasion resistant lining in textile. Sole in PU / TPU, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Sizes: 37-47.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The full nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex certified.
Fully lined, waterproof winter glove with touchscreen function, made of durable synthetic leather. The preformed fit and the back with stretch material make the glove movable and flexible. Hi-vis yellow on the back for good visibility. Reinforced thumb grip and fingertips, elasticated wrist. Good girp on both dry and wet surfaces. Sizes: 7-12. Complies with: EN388:2016 2.1.2.1.X, EN511: 1.2.1. EN407: X.1.X.X.X.X
Low shoe S1P in suede leather and breathable textile. Toecap in non-metallic fibreglass and anti-perforation sole made from a non-me tallic APT plate with zero perforation. SANY-DRY lining, moisture-proof and resistant to abrasion. Outer-sole in PU / PU. Insole made of EVA and fabric, anatomical and antistatic. Guaranteed higher stability. Sizes: 36 - 48.
This Essentials Rain Pack is delivered as a set. This lightweight suit can easily be rolled up to store when it does not need to be used. Comes in a retail package, perfect for shop displays. Characteristics: ● Watertight and taped seams prevent ingress of water ● Ventilating back and eyelets for improved breathability power and comfort ● 2 bags for safe storage ● Concealed hood for extra functionality ● Elastic cuffs for a good fit ● Fully elastic waistband for ultimate comfort ● Adjustable with press studs for a secure fit ● Retail packaging suitable for retail sales ● jack and trouser set for convenience ● Extremely water repellent. Quality: 100% Polyester, 190T, PVC Coated 190g. Available colors: Marine. Available sizes: S-3XL. Complies with: EN 343: 2003 + A1: 2007 / class 3-1.
High shoe with brown water resistant full grain leather upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in POROMAX: antibacterial. Outsole in PU/PU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
Eye-volution – from a technical standpoint probably the most complete Uvex glasses. Temples, front and nose bridge made of DCT: hard on the outside, comfortably soft on the inside. Temples easily adjustable in length and inclination. Replaceable lens. Fitted with clear polycarbonate lenses that provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. PCF (Product Carbon Footprint) = 0,23kg CO².
Low shoe glove in water repellent black nubuck. With an aluminium 200J toecap and a synthetic anti-perforation sole. Equipped with TPU heel reinforcement. Inner lining in breathable textile and perforated insole in EVA. Reinforced laces. Sole in PU/Nitrile, resistant to 300°C. Sizes: 35-48.
Cobra hybrid safety specs combines the advantages of regular safety specs and goggles. Has an anti-slip temple and branches. Clear polycarbonate lens with anti-scratch and anti-fog coating.
Low safety shoe in microfiber/textile with a synthetic toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant. 100% metal- and leather free.
Dust mask, class P2, for harmful dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and re duce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fit ted with non-adjustable, elastic headbands. NPF: 10.
Lightweight, lower-profile ear muff X4 with shells in TPU/ABS, with highlighted colors for better visibilty. Utilizes a newly designed spacer, specially formulated foam liners and innovative ear cushions to help improve attenuation. Easy adaptable with 'grip areas". Durable, ergonomic and very lightweight with high protection against noise. Combinable with respiratory- and eyeprotection. SNR: 32dB.
T-shirt long sleeves in organic cotton with a crew neck, double-stitched ribbed neckline and side seams. Quality: 100% ecological Fairtrade cotton Available sizes: S-4XL.
Extra high welding shoe in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with an extra large velcro for optimal fitting and breathable, abrasion resistant liner in textile. Outsole in PU/Nitrile, SRC antislip, oil and carburant resistant. Fire proof stitching in para-aramide. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 38-48.
J-Energy series with Adidas Boost Technology. Low hygiene shoe in microfibre with protective aluminium toecap, synthetic antiperforation sole, comfortable Infinergy sole (PU/E-TPU) and Memory ESD insole for optimal absorption of perspiration moisture. Lining in 3D-mesh.
Metal safety glasses in antique silver color, with polycarbonate lenses to protect against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. The side protection in clear polycarbonate and riveted. Separate matching pouch available.
Safety knife with an additional slider on the back of the cutter. For work with triple-walled corrugated board boxes. MAXISAFE adapts to the type of cut required at the time, be it sideways, horizontal or straight from "up top". Designed for a minimum of effort at a maximum of efficiency. Ergonomically styled plastic handle with metal wear- protector at the blade outlet.Welcome the safest and most versatile knife mechanism in the world! For use by right- and lefthanders. "GS- TESTED FOR SAFETY". Easy blade change: no extra tools required. No PPE. Blades: 1024827
Bottle Afterwash II, 200ml: this solution restores the eye's physiological balance, reducing the unpleasant feeling caused by chemic al splashes.
Women's Microfleece Jacket: • raglan sleeves; • zip up to the top of the collar with chin guard; • slanting vertical breast pocket with zip; • two side pockets with concealed zips; • two inner pockets. Quality: 100% Polyester, 185 g/m². Available sizes: XS-3XL. Available colors: red, navy, gray and black.
Cut resistant knitted glove with a foam nitrile coating. The liner or support is made of HPPE, nylon and glass fibre. The foam nitril coating guarantees a fine grip on oiled surfaces. Extra reinforcement between index and thumb. This thin glove combines a medium cut-resistance level (class B) with high comfort (lightweight and dexterity). Applications: General industrial work like machine maintenance or treating sharp oiled objects. Available sizes: 7-11.
