BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Gas filter ABE1 for use with Sundström face masks , protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic, acidic gasses, vapours and ammonium.
The Combined filter SR 599 is intended for use in the SR 500/SR 500 EX fan. The filter is of type A1BE2K1‑Hg-P3 R and provides protection against the following types of gases and vapours: Type A protects against organic gases and vapours, such as solvents, with boiling points > +65 °C. Type B protects against inorganic gases and vapours, such as chlorine, hydrogen sulphide and hydrogen cyanide. Type E protects against acidic gases and vapours, such as sulphur dioxide and hydrogen fluoride. Type K protects against ammonia and certain amines, such as ethylene diamine. Type Hg protects against mercury vapour. Warning. Maximum use time 50 hours. Type P3 R* protects against all types of particulate pollutants, e.g. dust, mist and smoke. *R (Re-useable): The filter is intended to be used for more than a single shift.
Modern, fitted ladies' t-shirt with reinforced shoulder seams and double-stitched neckline. Elastane in board. Ribbed neck in four layers. Oeko-Tex 100 certified. Quality: 100% cotton. Available sizes: XS-2XL.
Multinorm FR702 long sleeve polo: Inherently flame retardant; Protects against radiant, convection and contact heat; Concealed button closure; Rib collar and cuff; Comfortable fit; Segmented reflective striping. Quality: Modaflame Knit: 60% Modacrylic, 39% Cotton, 1% Carbon Fiber 60% Modacrylic, 39% Cotton, 1% Carbon Fiber 210g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluo yellow/black. Complies with: EN ISO 11612 A1, B1, C1, F1, EN 1149 -5, IEC 61482-2 IEC 61482-1-1 Elim 4.4CAL/CM², IEC 61482-2 IEC 61482-1-2 APC 1 and EN ISO 20471 Class 3.
Flame retardant and anti-static t-shirt FR32: Protects against radiant, convection and contact heat; Moisture-wicking and breathable material; Concealed breast pocket; sleeve pocket; Button closure. Quality: Bizflame Knit Antistatic: 99% Cotton, 1% Carbon Fiber 237g/m². Available colours: Gray and navy. Complies with: EN ISO 11612 A1 + A2, B1, C1, F1, EN 1149 -5 and IEC 61482-2 IEC 61482-1-1 ELIM 13cal/cm².
Fireproof battery bag to safely transport, store and charge the battery of an electric bicycle. If the battery should ignite, the damage will be limited to the bag and the battery. Tested with Li-Ion batteries up to 400W). imensions: 540x130x120 mm
Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with slip ratchet. Has a Chamlon sweatband.
Face shield in clear polycarbonate, length 185 mm. For use on EVO safety helmets. Marking: 1 AT 3 9.
Fire blanket specially developed for controlling battery fires. The fire is smothered immediately after the fire blanket is placed over the burning vehicle/battery. In the event of a battery fire, the battery will continue to burn, albeit in a controlled manner, resulting in less smoke and heat production. The Premium blanket can be used multiple times and is equipped with 120cm long loops to easily hoist the blanker over the burning vehicle. Comes in a transport bag. Constant temperature resistance utp to 1000°C (short tem up to 1300°C)
High shoe in waterrepellent split leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable 3D polyester and insole in polyurethane foam. Sole in PU/PU. Sizes: 35-42.
6-point textile suspension with ratchet for safety helmet Pheos.
Suitable for opening heavy boxes and cutting thick cardboard. Extra long blade (28mm). Replacement blade: 1058459.
Carrying strap for (trainer) self rescuer M40 SCR.
Fully coated cut resistant glove with thick lining and a double coated palm. The latex coating ensures a flexible glove, even at low temperatures.
The 3M™ Speedglas™ G5-03 Pro Welding Helmet is specially designed for the versatile welder. This helmet allows you to switch between welding and grinding work thanks to our new Tap functionality. With extensive adjustment options, including more control over how you view your weld pool and how you configure the helmet for extra protection against radiation, sparks and splashes, the G5-03 puts you in control of your protection. With 3M™ Speedglas™ Natural Color Technology, Variable Color Technology (with G5-01/03VC) and a tack welding mode (with G5-01/03TW).
Automatic welding cassette with three automatically darkening welding filters.Suitable for helmets G5-01 and G5-03. Dimensions of welding filter: 73x109mm. Battery life: 2000 hours.
Shorts in a lightweight and durable material partly made of recycled polyester. Comfortable workwear shorts with mechanical stretch and rib-knit stretch at waist.
Output for 3 persons / compressed air hoses to be installed on Aircare filter system.
Head covering, aluminised para-aramid or carbon:aramide, 500gr./m²,cotton Proban lining, 330gr./m². Integrated steel helmet, with protection over the shoulders and face shield made of Triplex 200 x 100 gold damped, a wire mesh face shield can be attached to some models.
Protective external lens for 100 series.
Sign according GHS normation in self adhesive polyester: health hazard. Size: 40x40mm. 20 labels per card. No PPE.
Back Pack Trauma Bag: Emergency supplies carried in on your back. Reflective trim. Material: polyester.3" padded shoulder straps w/refletive striping and phone hold. First aid supplies not included.
Visor protectors for mask TR-82/TR-2002 (BRK 820). Visor protectors made of acetate that protect visor against scratches and spatters.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: SO2 with alarms at 2PPM and 4PPM. (min. 2PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
2-in-1 shower gel for hair and body with skin-friendly sugar-based surfactant conditioner. With fresh unisex fragrance. Content: soft-box of 1000ml - Suitable for use with dispenser 1032589 PPE Category: not applicable. Previous title: Stoko Hair<(><<)>(><(>&<)><(><<)>)>Body
Charging cable for ACK081. Can be charged via an USB-port or connected to a FR08 (power supply). No PPE.
Box of 200 double-sided cotton swabs, biodegradable.
Set of ballistic spectacles. Case is supplied with 3 PC lenses: clear, smoke and CSP. Srtap is also supplied inside the case. Lenses have a PLATINUM coating: anti-scratch and anti-fog on both sides.
Designed to give maximum protection and comfort to the wearer, the Bizweld™ sleeves will provide protection in hazardous conditions. The elasticated cuffs ensure a flexible but comfortable fit. Must be worn with a suitable coverall or jacket/trouser combination. Quality: 100% Cotton, FR Finish. Available sizes: Universal. Available colours: Navy.
Pictogram with 'AED' inscription to be mounted on the wall in Forex (PVC). Dimensions: 15 x 15cm.
Hydrogel plaster intended to protect and soothe minor burn injuries. Burn Cover can also be used for minor cuts and abrasions. Burn Cover is blue, so can be used when handling food. The hydrogel does not adhere to the wound.Watertight and sterile. Cool the burn for at least 20 minutes using Cederroth Burn Gel, for example, or with lukewarm water prior to applying the Burn Cover. 10 plasters/box (74 x 45 mm).
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, blue
Highly robust drop and water-resistant lamp developed for police forces. Powerful output of 3300 lumens gives good images up to 705 metres away. With USB charging option and battery indicator. Easy to operate with 1 hand, even with gloves. Comes with lanyard, pouch, clip,spare o-ring ,USB-C cable. Includes NL2153HP battery, charger to be ordered separately.
ZOLL AED 3 Battery Pack (Lithium Manganese Dioxide Battery Pack). Suitable for the Zoll AED 3 semi-automatic (1060428) or the Zoll AED 3 fully automatic (1060429).
Rechargeable lithium-ion battery to be used with, among others, heated body warmer Howell, item 1061377.
High shoe in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 39-48.
Reusable multi-gas detector detects %LEL, H2S, O2 and CO simultaneously. Semi-annual calibration required. Battery autonomy: approx. 48u. With catalytic filtered LEL sensor are calibrated to methane by default. Suitable for very many applications, but less suitable for heavier compounds (C5 and above), not suitable for inert applications. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST..
Protection against cryogenic cold down to -197°C, thanks to a wool/cotton fleece lining and an ISO Air felt for protection against e xtreme cold. Protection against cryogenic gas splashes (liquid nitrogen or liquid carbon dioxide). The quality of the leather, lined with a waterproof membrane, is the same on the palm and the back of the cryogenic gloves. This model of short cryogenic glove fits snugly around the wrist thanks to an elastic cuff. Additional wrist protection is provided by a leather artery protector on the inside of the wrist. Conforms to EN388: 3222X , EN511: 231 , EN407: x3XXXX
Comfortable half mask in rubber with double perfectly adaptable strap. Covers the nose, mouth and chin. Maximal confort because of two exhalation valves that keep the exhalation resistance low. With threaded connection EN 148 for screw-on filters.With quir adjustable strap and magnetic buckle on the neck strap. Not for filters > 300g. NPF: dependent on the filter used.
Men's fleece with full zip from the Progression collection, enhanced visibility EN17353.
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,LEL,H2S,CO, VOCs.
Ki-Waistcoat TR310 with integrated lifevest: • Buoyancy 310N • Tricot mesh; • ID pocket; • VHF pocket; • Antenna/mic attachment; • Knife attachment; • Adjustable width; • Crotch strap. Available colours: Fluo yellow. Available sizes: S/M, L/XL and 2XL/3XL.
Flip-Top winter gloves with optimal dexterity with removable fingertips.
Orange box with cover made of impact resistant plastic with two click closures. With rubber seal in the cover. Dimensions: 26 x 17 x 8 cm. Includes content.
AE1HGP3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C ,sulfur dioxide and hydrogen chloride, mercury and toxic dust, vapour and smoke particles.
Chemical overalls made of PVC C2. These overalls have adjustable suspenders, elastic around the leg cuffs and elastic straps under t he sole of the foot. Available in: green. Sizes: M - XXL.
Bottle for long-lasting, effective anti-fogging treatment and intensive anti-static treatment of lenses in masks, visors, glasses, etc.
Dust and spatter-proof wall storage box in impact resistant plastic for storage of half-masks in industrial workplaces. Blue model, with pictogram, includes wall mounting hardware. Dimensions: 236 x 225 x 125 mm.
First aid. Rescue sign in polypropylene. Dimensions: 200x200 mm.
Hazardous electrical voltage. Hazard warning sign in polypropylene. Dimensions: 100mm. 3 pictograms per sheet.
Flexible, chemically resistant PU sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions: 60 x 60 cm. Suitable for sewers with dimensions 40x40cm. Comes in a handy storage box.
Mobile yellow container for general areas. The chemical and water resistant container protects the content against dirt, moisture an d damage. Content: 50 pads (41 x 51 cm), 12 socks (7.6 x 122 cm), 6 pillows (43 x 48 cm), 1 pair of gloves, 2 pairs of safety glasse s, 3 disposal bags, 1 emergency response handbook. Absorption capacity: 124 litres. The absorption material in the spill kit is of M RO quality.
Mandatory sign - Respiratory protection mandatory in self-adhesive polyester. Dimensions diameter: 200mm. Not PPE.
Disposable S-922 visor protectors (tear offs) for breathing hood S-600, S-700 an S-800. Prevents wear and damage of the visor.
Skimmer for absorbing oil, petroleum, hydrocarbons and other liquids. Repels water! With an outdoor cover and 2 loops for attaching a rope to create a pick-up line. Dimensions: diameter 13 x 45 cm in length. Absorption capacity: 46L.
Absorption roll 38 cm x 46 m. Material: 100% polypropylene. Features: heavy duty, white padded absorbent, with high absorption capacity and low-lint, does not take up water, very economical to use, absorption capacity 94 litres, weight 6.8 kg. Application: for practically every industrial application.
Galvanised emergency shower for vertical installation with stainless steel spray head. Shower head with self-regulating 76l/min flow regulator. Axion shower with rotating spray movement for better decontamination. Stainless steel pull handle. Pictogram SP177 included. No PPE.
-For breathing apparatus, 6,8L cylinder, mounted mask and demand valve -Outer dimensions: 700x300x520mm -Weight: 4,8 Kg
Compress to use for first, second or third degree burns. Safe, efficient and effective cooling method for burns. The compresses are made of a synthetic foam, that can fix the maximum amount of gel and therefore seamlessly connect to all contours of the body. Sterile milk white to clear hydrogel, largely consisting of water (96%) with preservatives. Tea Tree Oil disinfects, stimulates, is antibacterial and prevents the formation of scar tissue. Cools, relieves pain and minimises the development of the burn. Dimensions: 20 x 45cm.
Blue safety goggles type Skylite with soft grey DCT element. Offerscomfort and a profound protection, and adapts to the face perfectly.Combines the security of goggles with the comfort of a pair of glasses.Plastic frame fitted with grey PC lens: as with all Uvex PC lenses, the grey-tinted lenses also provide 100% protection against harmful UV radiation up to 400 nanometres. The grey tint also filters portions of the visible spectrum and therefore offers protection against blinding caused by intense sunlight, etc. The recognition of signal colours remains unimpeded. With the Supravision Excel coating: High- tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Terylene suspension with ratchet, resistant to high temperatures, fittedwith an XL VABON sweatband, suitable for Centurion Vulcan S22.
Regulator for mounting on gas bottle for manually testing or calibration of gasdetection devices.
Replacement hood for breathing hood S-855E in PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE
Ambidextrous black neoprene wrist support with reversible hook and loop strap. No PPE.
Complete disposable kit, for very short work in an environment with asbestos, not directly related to asbestos dust and no projection of asbestos (maintenance and repairs). It consists of 1 coverall, goggles from PVC, a cup mask, a pair of acrylonitrile green gloves, 2 bags of polyethylene marked asbestos, a pair of boot covers, a protective film roll.
