BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Optimized fit that integrates the nylon liner (18 gauge) into the nitrile and neoprene shell for better dexterity & tactility versus double gloving. Excellent dry & wet grip enhance dexterity and reduce hand fatigue. Cuff can be folded to act as a gutter to prevent chemicals running down the arm. Food approved.
Thin 18‑gauge cut‑resistant glove with nitrile coating. Touchscreen compatible and food approved. Sizes: 6–11 Complies with: EN 388: 4X31B – EN 407: X1XXXX
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Antistatic, silicone-free and DMF-free.
Cut resistant sleeve with CRF® technology, polyester, spandex and stainless steel fibre yarn. Approved for handling food. Elastic, length 420-490mm with thumb loop. Conforms to: EN388:2016: 3.X.4.X.D
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 30,5 cm.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for extra wide arms. Lenght 40 cm.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for narrow arms. with thumb hole Lenght 30 ,5 cm.
Seamless high cut resistant sleeve in HPPE with thumbslot and elastic cuffs on under and upperarm. Lenght 305 mm.
The 100% nitrile glove provides protection against a wide range of oils, solvents and chemicals. The diamond grip surface finish increases grip wet road surface for more convenience and safety. Length 33cm, thickness 0.15mil Sizes: 7(S)-11(XXL)Conform: EN388:2016 4.1.0.1.X, EN ISO 374-1:2016 Type A: AJKLOPT, EN ISO 374-5:2016 VIRUS
High-cut chemical glove. Strong grip. 18-gauge HPPE liner. FOOD approved Sizes: 6-11, length: 350 mm. Compliant with: EN388:2016 4.X.4.3.F, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 EN407: X1XXXX
Powder-free and latex-free nitrile disposable glove, accelerator-free to reduce the risk of type IV allergies. Non-slip textured surface. Food approved. Thickness: 0.11 mm – Length: 240 mm Sizes: 7 (S) – 11 (XXL) Packaging: 100 pcs/dispenser box. Sizes 10–11: 90 pcs/dispenser box Complies with EN 455‑1/2/3/4 for non-reusable medical gloves. Conformity: EN 374 – TYPE B: JKT – VIRUS – EN 421
Chlorinated and powder‑free disposable nitrile glove with excellent fingertip sensitivity and a fingertip grip pattern. Easy donning and doffing. Food approved and touchscreen compatible. Thickness: 0.11 mm / 2.36 Length: 240 mm Compliant with: EN 374‑1: Type B JKT, EN 374‑5: VIRUS
Blue nitrile disposable glove providing excellent protection against chemical splashes. Textured fingertips. Food approved and touchscreen compatible. Extended cuff. Thickness: 0.20 mm Length: 295 mm Sizes: 7–11 Compliant with: EN 374‑1: Type A JKLOPST, EN 374‑5: VIRUS, EN 421
Ansell HyFlex 11-814: Ultra-thin, breathable work glove with exceptional sensitivity, strong grip, and excellent comfort – ideal for precision work. 18 gauge. Nitrile foam coating. Sizes: 5-12 Compliant with: EN388: 3121A
Powder-free and latex-free nitrile disposable glove, accelerator-free to reduce the risk of type IV allergies. Non-slip textured surface for excellent grip and precise object handling. Long cuff for optimal protection. Food approved. Thickness: 0.11 mm. Length: 290mm Sizes: 7 (S) – 11 (XXL) Packaging: 100 pcs/dispenser box. Sizes 10–11: 90 pcs/dispenser box Complies with EN 455‑1/2/3/4 for non-reusable medical gloves. Conformity: EN 374: TYPE B: JKT – VIRUS – EN 421
Green, latex‑free disposable neoprene glove, suitable for touchscreen use. Extended cuff. With fingertip pattern. Food approved. Thickness: 0.12 mm Length: 290 mm Sizes: 7–10 Compliant with: EN 374‑1: TYPE B KPT, EN 374‑5 VIRUS, EN 421
Disposable black nitrile glove with protection against chemical splashes Type A (JKOPST). Ideal for environments where silicone must be avoided, such as painting or finishing work. Improved grip and control thanks to textured palm. Approved for food contact, silicone-free, powder-free, and suitable for touchscreens. Tested for substances that may interfere with paint adhesion. Length: 295 mm Thickness: 0.20 mm AQL: 0.65 Sizes: 7-11 Compliant with: EN388: 1000X EN374: Type A (JKOPST) EN374-5: VIRUS
Providing incredible EN388: 2016 level F cut resistance (ANSI 105:2016 A8), the glove is light and dexterous able to be worn for long periods of wear. An extended cuff provides added protection to the wrist area and all gloves in the food range can be industrially laundered to the ISO 15797:2018 standard. EN388: 2016 level F cut resistance (ANSI 105:2016 A8); EN388: 2016 4 × 4 X F; New yarn structure delivers improved grip and mechanical performance; Permanent antimicrobial component; Free from glass fibre to prevent product contamination; Tested to EN ISO 15797 industrial wash test to withstand x50 washes at up to 85°c and drying up to 70°c with no effect on cut resistance; Colour coded to prevent cross-contamination; Designed for knife hand use; Ambidextrous.
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 180 °C. Silicone free.
Chlorinated (provides more comfort and is less sticky) with texture on the fingertips. Biodegradable. Size XXL : 90 gloves in dispenser
