BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Overglove hight voltage in premium goat skin leather for insulated rubber gloves of class 1,2,3 <(>&<)> 4. Offers mechanical protection and extends the life of rubber insulated gloves. With velcro, lenght: 30 cm. Sizes: 8-12.
Synthetic leather glove, Winter-lined, 0,7 mm, Microthan®+, Diamond grip pattern, Polyester, Fleece, Cat. II, Black, grey, yellow, Wrist support, Chrome free, Velcro®, for allround work . EN 388:2003, 2322 EN 511:2006, 21X
Flexible glove in unthoughened vulcanised rubber. Test voltage 30.000 volt, use voltage 26.500 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. In line with EN 60903 class 0 cat AZC.
Thin work glove in synthetic leather. Very breathable, with open cuff. Synthetic alternative to Tropic gloves. Sizes: 7-11.
Welding gloves made of grey nappa leather with protective cuff. The 15 cm protective cuff is also made of quality nappa leather and the fingers have reinforced seams. Available in: grey.
•Framing finger config for grasping fasteners •Padded palm with Tena-Grip™ reinforcement •Technical hex-stretch poly knit construction •Neoprene knuckle pad •Low-profile molded hook and loop closure with ID space •Pull-on tab for easy on/off •EN 388: 2016: 3.1.3.2.X •Patent pending
Blue split leather glove, winter lined with Scotchgard leather reinforcements in the palm. Thumb and forefinger tips are touchscreen compatible. Protects against temperatures up to -30°C (slightly wet or dry environments). Sizes: 7-11.
Fully coated cut resistant glove with thick lining and a double coated palm. The latex coating ensures a flexible glove, even at low temperatures.
Goat leather gloves of super quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver (super quality) and Driver EC (standard quality).
Economical solution for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless polyester lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Probably the thinnest cut F glove on the market, made with the new advanced CRF®Omni technology, nylon and elastane. 18 gg knitted glove and PU-dipped, superior for any work with very sharp and small objects. Reinforcement between the thumb and index finger and touchscreen functionality. The new CRF® Omni technology does not contain any steel or glass fiber that can irritate the skin. The gloves stay soft and comfortable throughout the work task. CAT II . In line with : EN ISO 21420:2020 - EN 388:2016+A1:2018 3X43F
Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.
White gloves made of heavy cotton. Sensitect gloves have a perfect fit,and are ergonomic and extremely comfortable due to the Interlockquality. Can be worn either as a liner glove or for product protection.
Lined winter glove in goat leather. Open cuff. Thin. Fully lined. Sizes 7-11.
Waterproof fully lined winter glove with soft, durable goat grain in the palm. The glove has touchscreen function on the back of the middle finger, pre-shaped fit and synthetic stretch material at back of hand. The cuff, which has a half<(>&<)>#02;length cut, is elastic at wrist to ensure that the glove stays firmly in place. Sizes: 6-13.
Extremely good fingertip sensitivity, extra flexible, perfect fit and extremely light glove. Seamless knitted white nylon (13 gauge) Suitable for light applications in dry circomstances. Sizes: 6-11. In line with EN388: 2.1.2.X
Highly cut-resistant glove in very fine knit, 0.85 mm. 18 gauge. Soft nitrile coating. Touchscreen on all fingers. Reinforced thumb cavity. Sizes: 6-12 Complies with EN388: 4X43F
The ultralight MFT PRO 381 gloves are designed with flexibility and comfort in mind, even during extended wear. The unique microfiber design, weighing only 19 g and with a finger thickness of just 0.84 mm, ensures the 381 offers optimal tactility when working on delicate projects. Sizes: 6-10 Compliant: EN388: 4121X
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
High quality cow grain leather glove (beige) with pistol reinforcement on the palm in cow split leather. If you need a solid glove with very good grip, this is the ideal solution! The glove is fully lined with a very comfortable cotton lining and has an extra long rubberized cuff of 10 cm for better protection of the forearm. The glove reaches outstanding mechanical results and is available in a lot of sizes. Sizes available: 8-12. The gloves are designed to use in the construction sector, transport and distribution. Conform: EN388: 4.2.4.4
Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P
A durable neoprene glove with great dexterity and excellent grip. The glove is comfortable and flexible due to the preformed fit and the Velcro at the wrist ensures that the glove stays in place. The glove has a touchscreen function and excellent grip in the palm thanks to the Guide Grip Pattern. Padded palm and thumb/index finger reinforcement for a long glove life. Sizes: 7-12. Complies with: 2.1.2.1.X, EN511: X.2.X, EN407: X.1.X.X.X.X
Cut resistant glove, Nitrile, Palm-dipped, CRF® Technology, Glass fibre thread, Nylon, Polyester, Spandex, 13 gg, Foam grip pattern, Cut resistance level 5, Cat. II, Black, Water and oil repellent palm, for fine assembly work. EN 388:2003, 4544
Protection against cryogenic cold down to -197°C, thanks to a wool/cotton fleece lining and an ISO Air felt for protection against e xtreme cold. Protection against cryogenic gas splashes (liquid nitrogen or liquid carbon dioxide). The quality of the leather, lined with a waterproof membrane, is the same on the palm and the back of the cryogenic gloves. This model of short cryogenic glove fits snugly around the wrist thanks to an elastic cuff. Additional wrist protection is provided by a leather artery protector on the inside of the wrist. Conforms to EN388: 3222X , EN511: 231 , EN407: x3XXXX
Leather glove, Winter-lined, 0,7-0,8 mm, Full grain goatskin, Neoprene, Spandex, Thinsulate™ 100g, Cat. II, Blue, black, white, Reinforced fingers and thumb, Waterproof, Velcro®, for allround work. EN 388:2003, 2111X EN 511:2006, 111
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a 3/4 liquid-tight coating. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Protective overglove made of flame-resistant premium goatskin leather for electrical insulating gloves. Enhanced protection without compromising dexterity. For use with Class 00 ULW and Class 0 APC2 electrical gloves. Length: 255 mm Sizes: 7–12 Compliant with: EN388:2X21X
Seamless knitted glove (15 gg) with enhanced grip for wet and oily conditions, offering excellent dexterity and sensitivity. Featuring XLNT nitrile technology, food-grade, soft feel and a snug fit, with a tight and flexible cuff. Free of DMF, silicone, and natural latex. Oeko-Tex Standard 100. This FA (Food Adjusted) version is unprinted. Sizes: 6-11, Conforms to: EN388:2016 4.1.2.1.X, EN407: X.1.X.X.X.
Glove made of green grain leather and aramid thread for protection from cut wounds. With 2-hand protection against chain saws.
Knitted cotton (interlock), with knitted wrist, men?s and women?s size. NO PPE
Gloves with roughened rubber coating on interlock lining with open back and tricot cuff. Good cut resistance and very good grip on dry and wet or smooth surfaces.
Gloves designed for work in cold working conditions. The combination acrylic/spandex in the seamless liner (13 gauge) combines a light weight with warmth and suppleness. The double latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: 7(S)-11(XXL).
Overglove light voltage in premium goat skin leather for insulated rubber gloves of class 0 & 00. Offers mechanical protection and extends the life of rubber insulated gloves. Lenght: 24-27 cm. Sizes: 7-12. ATTENTION : order these gloves in a size larger than your normal glove size.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. With ergonomic TPR patches for basic impact protection on the back of the hand. Sizes 6-12.
Highly abrasion resistant glove with high dexterity. Both heat resistant and flame retardant, and also offers good protection against cold. Water resistant and touchscreen compatible. Sizes 6-12.
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
Dexterous cut resistant glove with highest cut level F, suitable for precision work. Ultra light thanks to 18 gg knitted with CRF® Omni cut resistant technology. Palm dipped with super soft nitrile foam that provides excellent grip on dry surfaces. Reinforced thumb crotch for improved longevity. Breathable materials for all day comfort. Wide range of sizes means a perfectly fitting glove for everyone. Skin friendly with Derma-test and Oeko-Tex certificate. CAT II . In line with : EN 407:2004 X1XXXX - EN 388:2016 4X43F - EN 420:2003+A1:2009
Specially developed for operating firearms, ultra-thin and slim wit, feels like a second skin. The synthetic suede in the palm protects the user against contact heat of 100°C for 10 seconds.
Premium full-grain goatskin leather glove with winter lining for warmth and durability. Features 150g Thinsulate™ insulation for unparalleled comfort. The lining features individual finger cuffs for an optimal fit. The waterproof design keeps hands dry, and the specially designed thumb provides increased flexibility. Reflective detailing enhances visibility in low light. Sizes: 7-12. Conforms to: EN388: 2121X EN511: 321
Seamless lined glove with foam latex coating on the full glove and extra latex on the palm. Extremely good grip and abrasion resistance. Carrier in nylon/polyester. Sizes: 6(S) -10 (XXL).
Textile glove, Cold insulation gloves, 7 gg, acrylic, for allround work: Fishing, hunting, shop work. CAT I . In line with : EN 420:2003+A1:2009, EU Regulation 2016/425.
Sterile cut resistant glove. Dyneema Diamond yarn. Sterility Assurance: These two-glove liners also have a Sterility Assurance Level (SAL) of 10-6 , for a lower risk of contamination. The BioClean™ cut resistant liner S-BCRL is specifically designed to be worn between two cleanroom gloves. Class 10/ISO Class 4 & EU GMP Grade A/B and other sterile cleanroom heavy duty applications for extraction and maintenance with a risk of cuts and bruises. Sizes: XS-XL. Conforms to: EN388:2016: 3.X.4.X.B
This glove combines 3 important elements needed for handling ropes: dexterity, high abrasion resistance, and good grip.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a liquid-tight palm and an airy top. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Impact resistant glove for demanding environments. Large back coverage. Touchscreen. High visibility colours for improved hand gestures. Conforms to EN388:2016: 4.X.4.3.D.P, EN407:2020: X.1.X.X.X.X
Loggers working gloves with mechanical resistance in 100% goat leather with nylon and spandex inserts in red color. They provide great dexterity and grip. They have a perfect fit, and impact and vibration foams in the palm of the hand. Sizes: 8-12.
Fully lined, comfortable glove from the Arctic series. Made for the cold and harsh conditions. A quality glove with a waterproof membrane, adjustable Velcro strap at the wrist and a pull tab at the cuff with an opening for the carabiner. Soft goat leather for superior comfort, touchscreen function and reinforcements in the palm. Size 7-12. Complies with: EN388:2016 3.1.2.2.X, EN511: 3.2.1, EN407: X.2.X.X.X.X
Fully lined, comfortable glove from the Arctic series. Made for the cold and harsh conditions. A quality glove with a long cuff, removable liner, waterproof membrane, snow closure, carabiner, wrist fastening and adjustable Velcro strap at the wrist. Soft goat leather for superior comfort, touchscreen function and reinforcements in the palm. Size 7-12. Complies with: EN388:2016 3.1.2.2.X, EN511: 3.3.1, EN407: X.2.X.X.X.X
• 15 gauge grey Kyorene® graphene liner • Full blue nitrile coating with black HCT® micro foam nitrile palm coating for superior oil and water resistance • Bacteriostatic kills harmful bacteria • Thermal regulating to keep the hands comfortable • Odor neutralizing to keep the gloves smelling fresh • DMF and silicone free
Heavyweihgt working glove in piggrain leather, collar model, specially-sewn thumb, cotton back and cuff. Extra small end extra large sizes : 4, 7-13.
Antivibration protection for building and construction applications. Synthetic glove with premium PU in the palm. Damping foam for excellent anti vibration performances. Ventilation between the fingers. Exellent fit and preformed hand shape. Sizes: 7-12.
This glove offers excellent grip in dry, wet and slightly oily environments. Coated knuckles and triple nitrile foam palm coating for a solid oil barrier. Lining with 18 gg knitting technology and more than 90% recycled polyester. Touchscreen. Oeko-tex approved. CAT II . Conforms to: EN 388:2016: 4.1.1.1.X - EN 407:2020: X.1.X.X.X.X
Vibrothan® foam technology for optimal vibration dampening protection. Excellent durability and grip performance due to Microthan® synthetic leather. Vibration reducing according to EN ISO 10819, Reinforced index finger and little finger, Reinforced seams, Reinforced fingertips, Padded palm, Pre-bent fingers, Specially designed thumb, Ergonomically shaped, Specially designed details. Sizes: 7-12 EN388:2016 2.2.2.2.X
Light seamless glove with micro-porous nitrile coating on the palm (0.84mm). Finger-sensitive with good grip on wet or oiled components. Ultralight (19g) Microfibre carrier. Latex-free. Sizes: 6(S)-10(XXL).
Ansell HyFlex 11-814: Ultra-thin, breathable work glove with exceptional sensitivity, strong grip, and excellent comfort – ideal for precision work. 18 gauge. Nitrile foam coating. Sizes: 5-12 Compliant with: EN388: 3121A
Seamless knitted nylon glove with white PU coated fingertips. For microelectronics, packaging, archiving and precision work. Sizes: 6, 7, 8, 9.
Seamless knitted polyamide/elastane grey glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 25 seconds). Suitable for handling, and precisionwork in dry and oily conditions. Sizes: 7-11.
Durable un-lined glove in synthetic leather with great dexterity and a good grip. The pre-shaped fit makes the glove comfortable and flexible, an elastic at wrist and a half-length cuff to ensure that the glove stays firmly in place. Sizes: 6-13.
Heat-resistant glove, Cotton, Nitrile-dots, Dots. Withstands contact heat up to 250°C, Extra long, for allround work. EN 388:2003 1.2.3.2 EN407 0.2.X.X.X.X
High-quality welding and heat protection sleeve with elastic upper part and additional hook-and-loop fastening for a secure fit. The soft, pre-shaped textile makes the sleeve highly flexible and ensures a comfortable fit around the arm. The sleeve provides excellent protection against ambient heat and is certified for contact heat level 2 (250 °C). Suitable as a versatile sleeve for TIG, MIG and MAG welding. Suitable for both right and left arm. Sizes: M to XL Complies with: EN388: 2222X – EN407: 423234
HPPE glove, gauge 18. Nitrile foam coating on palm and fingertips. Wrist with elastic tightening. Ideal for precision work. Sizes: 7 to 11. Conforms to: EN388:2016: 4.X.2.1.B
A very thin and flexible nitrile-dipped ESD glove for ESD-protected work areas where maximum dexterity is needed. The glove has touchscreen functionality, ensuring seamless transition between duties without having to remove the glove. Thin 18 gg fibre and highly breathable to ensure all-day comfort. CAT II . In line with : EN ISO 21420:2020 - EN 407:2020 X 1 X X X X - EN 16350:2014 R <(><<)> 1,0 x 10⁸ Ω - EN 388:2016+A1:2018 4 1 1 0 X - IEC 61340-5-1:2016 R <(><<)> 1.0 x 10⁹ Ω
Versatile tactical winter glove designed to enable weapon operation and precise frisking. Slim all-round fit and exceptional dexterity. Windproof and water-repellent durable softshell fabric with fleece liner, TPR reinforcements, touchscreen compatible.
Very soft, durable assembly glove made from recycled polyester. One pair is equal to a 0.5l PET bottle. The glove is 15 gg knit, contains spandex and has a new nitrile foam coating that uses less water in production. Touchscreen function - operate your smartphone with gloves on.. In line with : EN 388:2016+A1:2018 4121X - EN 407:2020:X1XXXX
