BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Soft flexible liner offering suppleness and dexterity. Excellent tactile sensitivity with superior comfort. Anatomically engineered, reducing hand fatigue and increasing comfort. Excellent grip performance for safe handling in dry-to-oily applications. Sizes: 7-11. Complies with: EN388:2016 4.1.3.1.X
Extreme chemical protection: MICROCHEM™ multi-layer barrier. Utilizing unique rubber polymer and plastic laminate technology for extreme protection against a wide range of chemicals. Approved for contact heat up to 100°C/212°F, antistatic according to EN 1149-3 standards and made without natural rubber or silicone, for protection against mechanical risks and allergic reactions. Comfortable unique manufacturing process and nylon liner support for more comfort during use
Welding gloves made of grey nappa leather with protective cuff. The 15 cm protective cuff is also made of quality nappa leather and the fingers have reinforced seams. Available in: grey.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 10,000 volts, operating voltage of 7500 volts. Length 41 cm, Sizes: 7-12.
Supple, wear resistant, silicon-free gloves made of nitrile coated gel foam with lining of knit cotton and rubber inner layer to dampen vibrations. Reduces susceptibility to hand-arm vibration syndrome (HAVS) during industrial activities to an absolute minimum. With Velcro closure.
Premium grain goatskin leather combined with cut and impact protection glove. TPR impact protection on top of the hand and the full lenght of the fingers. Additional palm leather layer enhances cut resistance. Reinforced seams on the index finger and base of thumb. Secure cuff closure with TPR tab closure. Sizes: 8-13.
These newly developed gloves, with chainsaw protection on both hands, offer great dexterity combined with excellent grip to allow great handling of the chainsaw. The anti-skid waterproof rubber reinforcement assures a high durability and grip of the chainsaw even during the wettest weather circomstances. Sizes: 8-12.
Synthetic glove, Nitrile foam/waterbased PU, Palm-dipped, Acrylic, Nylon, 10 gg, 15 gg, Spandex, Foam grip pattern, Fleece, Cat. II, Black, yellow, Withstands contact heat up to 100°C, for allround work . In line with : EN 388:2016, 4221A EN 407:2004, X1XXXX EN 511:2006, X2X
Flexible and close-fitting glove made of Guide HXFIBR material that offers cut protection and excellent dexterity. With nitrile coating on the palm for good grip, with high-visibility orange TPR/TPU impact protection on the back. Sizes: 6 to 12 Compliant with: EN388: 4X42DP, EN407: X1XXXXX, EN16350, EN 61340-5-1
Cold resistant gloves with a creative combination of high-tech, breathable materials (Hipora) and very high tactility. Lining with 40g of 3M Thinsulate®. The palm also has a double reinforcement. Touch screen-capable thumb fand index fingers. Sizes: S / M / L / XL / XXL.
Heat resistant Kermel mitt with double lined cotton fabric. Kevlar® reinforced at the thumb. Split leather 13 cm cuff made with Kevlar® fibres. Contact heat to max. 500 °C.
Excellent tactility, the perfect solution in situations involving chemical risks thanks to combination of neoprene and natural latex. These unlined neoprene gloves are natural latex on the inside, flock-lined with cotton and have a standard profile.
Comfortable waterproof gloves with multiple layers for extra protection. These gloves provide protection for the hands and arms against extreme cold and spatters of cryogenic liquids (liquid nitrogen). Indispensable for work in temperatures to -160 °C. Cryo Gloves are also extremely light and provide excellent tactility. Sizes: S / M / L / XL / length: 40 cm. Testing supports a Convective Cold level of 4 and a Contact Cold level of 2, but the Abrasion Resistance level of 1 allows reporting of Convective and Contact Cold levels of 1 only.
Heat resistant glove Polysafe in Kevlar with water- and vapourproof nitril underglove. The Polysafe Multi keeps his isolating capacity until 350°C. Sizes: universal, 33 cm length.
resistant to 350°C. Perfectly cut resistant so ideal for commercial kitchens, processing hot items and in all industries which present cutting and heat risks.
Thin work glove in synthetic leather. Very breathable, with open cuff. Synthetic alternative to Tropic gloves. Sizes: 7-11.
Lined winter glove with reinforcments in PU palm. Wind-and waterproof membrane makes sure that hands stay dry and warm. Glove has touch screen on the thumb and velcro strap at the wrist. Protects up to -10°C. Sizes 8-12.
Finger-sensitive glove with double waterproof nitrile foam coating on a cut-resistant PE carrier. Highly cut resistant. Glove 3/4 coated. Suitable for all operations requiring high finger sensitivity such as assembly, packaging, automotive, steel and glass industry, ... Sizes: 7-11.
High-quality, heat-proof glove in para-aramid and cowhide leather. Wool lining, cuff length 15 cm. Suitable for contact heat up to 350°C for 15 sec.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Chemical and cut protection glove, 0,3 mm, Nitrile, sandy finish. Fully-lined, 18 gauge polyester, nylon, glass fibre thread, spandex. Oil and grease resistant, for allround work.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Antistatic chemical-resistant gloves for protection against oil, paint, solvents and detergents in environments with a risk of electrostatic discharges.
Extremely flexible glove in natural rubber latex. operating voltage of 500 volts, test voltage of 2.500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. length 360 mm.
Chemical glove for precision and medium-heavy work. Immersed in a two-layer liquid-tight Nitrile using our XLNT technology. 35 cm long safety cuff. 18gg liner for high fingertip sensitivity in difficult environments. Type A chemical protection. Food approved and Oeko-tex certified. EN388:2016 4X43C EN407: X1XXXX EN374-1:2016: AJKLMNOT
Goat leather gloves of super quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver (super quality) and Driver EC (standard quality).
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Protection against a wide range of chemicals, acids, caustics, solvents, grease and oil. Constructed with a seamless knit liner (13 gauge) for maximum comfort and endurance. Lenght : 35,5 cm. Sizes: 8-11. In linde with: EN388:2016 3.X.4.3.E, EN ISO 374-1:2016 Type A: A.J.K.L.M.T, EN ISO 374-5:2016
Cut resistant glove, Nitrile, Palm-dipped, CRF® Technology, Glass fibre thread, Nylon, Polyester, Spandex, 13 gg, Foam grip pattern, Cut resistance level 5, Cat. II, Black, Water and oil repellent palm, for fine assembly work. EN 388:2003, 4544
Blue powder free 100% nitrile glove. Suitable for use with food. Sizes: S(7) to XL (10). Length: 24 cm. Thickness: 0,12 mm. Package: per 100 gloves. PPE Cat I
Ultra-light glove 21 gauge for unparalleled comfort and dexterity with very high cut protection (F).
Fluid-tight glove in jersey with neoprene coating, 30.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. The extra insulation layer makes the glove ideal for working for short periods with hot liquids at up to 180°C or in a cold environment up to -25°C. A popular model for the petroleum industry, for waste treatment and for the transportation and treatment of hazardous substances! Siliocne free.
Cut resistant gloves knit from Zirnium® thread, length 25 cm.
Flexible glove in unthoughened vulcanised rubber. Test voltage 30.000 volt, use voltage 26.500 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. In line with EN 60903 class 0 cat AZC.
Warm, insulating gloves with acrylic/nylon liner with PVC coating. PVC-foam coating stays flexible in cold temperatures, food approved. Industy leading combination of comfort, warmth and dexterity.
Blue nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
18gg liquid-tight cut protection glove with double-dipped palm; first layer of nitrile fully dipped for extra liquid barrier, second layer of nitrile palm dipped. Oeko-tex certified. Touch screen. Sizes: 7-11. Conforms to: EN388:2016 4.X.4.2.D EN407: X.1.X.X.X.X
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 10,000 volts, operating voltage of 7,500 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary.
60 cm cut and heat resistant arm protector. Contact heat to 100°C for max . 15 seconds. With thumb hole and Velcro closure on upper arm.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Length 41 cm, Sizes: 7-12.
Durable anti-cut quality leather welding gloves in cow split leather water and oil replleant for beter heat resistance. With waterproof and breathing membrane. Excellent protection of fore arm due to a 15 cm long heat resistant leather cuff. Sizes: 8-9-10-11.
Economical solution for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless polyester lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
- Chemical protection - Triple PVC coating - Very finger sensitive - Seemless knitted cotton liner 13 gauge - Sizes: 8-11 - Length: 30cm - EN388:2016 4.1.2.1.X - EN ISO 374-1:2016 Type B: AJK - EN ISO 374-5:2016
Flexible, well-fitting work glove made of Guide HXFIBR™ fibers (13gg) that combine very good cut protection with dexterity. The liquid-tight nitrile coating of the glove ensures for protection against liquids in the palm and protects the knuckles on the top. Touchscreen function and extra reinforcement on the thumb and index finger. Approved for contact heat up to 100°C (15sec.) and suitable for contact with all types of food. Sizes: 7-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X
Flexible, tight-fitting winter work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides a good grip. 15 gg liner combined with a 7 gauge acrylic inside lining for cold protection. Cut protection level F, approved for contact heat upt to 250°C (15sex) and food safe. Oeko-Tex approved and ESD tested. Compatible with Touchscreens. Sizes:7-12.
Glove in butyl rubber, unlined, length 35 cm, thickness 0.78mm. Colour: black. Flexible and comfortable, protects against a wide range of chemical products, detergents and solvents, liquid-tight. Silicone-free and antistatic. Sizes: 7-10. Suitable for chemical, petroleum and paint industry, transport and handling of hazardous products.
Thin work glove made of synthetic leather with preformed fingers. Very breathable, with open cuff. Sizes: 7-11.
Lined winter glove in goat leather. Open cuff. Thin. Fully lined. Sizes 7-11.
Cut-resistant glove with Zirnium with PU coating and reinforcement in split leather between thumb and index finger. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Extremely good cut resistance. Sizes: 6-12.
Blue split leather glove, winter lined with Scotchgard leather reinforcements in the palm. Thumb and forefinger tips are touchscreen compatible. Protects against temperatures up to -30°C (slightly wet or dry environments). Sizes: 7-11.
Chemical resistant glove for precision and medium duty work. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 18gg nylon liner for high fingertip sensitivity in difficult conditions. Sizes: 7-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: JKLMNOPT, EN ISO 374-5:2016 Virus.
Durable unlined guide GTX synthetic leather work glove with impact protection for heavy duty work.
Very thin nitrile glove (0.20mm) for maximum finger feeling, with grip pattern, unflocked, close fit. Protects against hazards such as aggressive acids, oils and strong detergents.
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
Seamless glove with impermeable full nitrile coating all over the hand with extra nitrile foam coating finish on the palm for good grip on wet or oiled components. High-abrasion resistance and anti-impact protection on the back of the hand. Unique Showa ergonomic shape that replicates the natural curve of the human hand. High-visibilty green colour for visible hand signaling. Seamless knitt designed to prevent irritation.No Latex. Sizes: 7(M)-10(XXL)
Cut and heat resistant arm protector 45 cm., with thumb opening and velcro.Ergonomic design. Protects during 21 seconds against 100°C contact heat (test report).
Sturdy blue single use glove in 100% nitrile with rolled edge. Completely powder-free and free of natural rubber. With textured fing ers. Food suitable. Suitable for medical examination. Sustainable packaging.
Chemical resistant glove with cut protection for precision and medium duty work with cut risk. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 15gg para-aramid lining. Sizes: 7-12. Complies with: EN388:2016 4.X.4.1.C, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 Virus.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
Level F cut resistance. Protects from glass, blades and abrasions. Protection against contact heat up to 100°C. Crinkle latex grip offers excellent grip. Reinforced thumb crotch for extra protection and durability. Superior strength and comfort. Reflective label for improved visibility .Breathable seamless liner 13 gauge liner for a perfect fit. Sizes 6(XS)-11(XXL). Conform: EN388:2016 3.X.4.4.F, EN407: X.1.X.X.X.X
Liquid-tight glove in jersey with high-quality neoprene coating, 45.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. Hence the great demand for this glove from the chemical and petroleum industry, the transport sector and companies that work with hazardous substances.
Prioritize comfort and wearer safety with the CS710 chemical resistant gloves. A double-dipped nitrile coating offers robust durability, whilst the seamless liner and natural latex-free composition ensure comfort during long periods of wear. Enhanced grip from the foamed nitrile palm coating provides extra grip, even in oily or slippery environments. Sizes: 7(S) - 11(XL).
Chemical protection gloves against hazardous chemicals. Resistant to acids, bases, solvents and alcohols. Reach compatible. Length: 38cm, thickness: 0.78mm.
Disposable 100% nitrile gloves with beaded cuff. Embossed fingertips for extra grip. Fully powder-free and free of natural rubber, waxes, silicones, or plasticizers. Touch N Tuff offers 3 x more puncture resistant than vinyl and natural latex. Suitable for laboratory work, chemical industry, emergency services, electronics and other precision assembly work. Colors: blue. Sizes: 6.5 to 7/7.5 to 8/8.5 to 9/9.5 to 10. Length: 300mm, thickness: 0,10mm.
A soft leather glove with cut, perforation and needle protection and extra PVC reinforcement for better durability and grip. The Alycore technology on the inside of the hand and over the fingertips protects the palm, fingertips and top of the fingertips against needles and other sharp objects. Maximum Alycore protection in the palm. Specially designed for hazardous work involving the risk of cut and sting wounds, for example by broken glass, steel wire and so on. Sizes: 7 / 8 / 9/ 10 / 11 /12.
Durable anti-cut quality leather welding gloves in cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 8-9-10-11.Length cuf: 15 cm.
Arc flash protection for the toughest conditions, will not drip, melt or ignite. Made from durable and comfortable materials. Seamless knitted liner of glass fibre, para-aramid, meta-aramid, nylon and spandex with a smooth finish mixed coating of nitrile, chloroprene. With plastisol prints on the back of the hand for extra protection. Sizes: 6-12.
