BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
The SST Dock is an automated test station that allows Bump and Calibration testing and is compatible with the full SST Range in one module. It has the capability to be connected via Wi-Fi, BLE or Cellular and allows for desk, wall and hard case mounted dependent on your application. This kit comes in a hard case and has room for 2 gas bottles and a regulator.
Tool to bump the SST1 detector without using the Watchgas app. Runs on 3 AA batteries (not included).
Tool to put the device to sleep for a maximum of 365 days without using the Watchgas app. Putting the device to sleep can extend its lifespan up to an additional 1 year. Runs on 3 AA batteries (not included).
Filters to protect sensors of the SST1 detectors.
Test cap as a spare part of the SST1, needed to bump test and manually calibrate the device.
Replacement clip including screws for all SST series detectors.
Additional module to extend the multi-charger for SST (1062812) with additional 5 charging slots. One coupling cable (1062815) is required per additional module. (not included).
Coupling cable to extend the mulitcharger (1062812) with an additional module (1062814). A coupling cable is required for each additional module. Up to 4 modules for a total of 20 devices can be placed on top of each other.
Test cap as a spare part of the SST4 Micro, needed to bump test and manually calibrate the device.
Test cap as a spare part of the SST4 Mini, needed to bump test and manually calibrate the device.
External pump for portable gas detectors without built-in pump. To be connected to a hose of max. 15m. Designed for evacuation, measurement, for example in tanks and shafts.
Aluminium bottle of 58L with test gas H2S 10PPM for calibration of Watchgas detectors. To be used for manual calibration or to be combined with the Watchgas docking station SST1/SST4 (1062077). Always to be used with regulator 1062078.
Float to hang at the end of a sampling hose to prevent the hose from ending up in water.
Filters to protect sensors of the Gas Alert micro clip. Kit with 5 filters and filterclim to assemble filters on detector.
Manual pump with 30 cm probe and filter for gas detectors GasAlert, Icon and Icon+.
