BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Includes the smart-fix cover for the E-WG200 and the belt clip.
Replacement power adaptor for GasAlert-devices.
Desktop charger compatible with Twig Neo/Easy en One (Atex) devices, full USB connectivity (USB cable not included).
5 way cradle charger for 5 BW Icon/Icon+.
Kit to activate IntelliDox. Includes power supply with region-specific AC power cord, ethernet cable, inlet (purge) filter assembly,3 ft. / 1 m calibration gas tubing, 3 ft. / 1 m purge gas tubing, 15 ft. / 4.5 m exhaust tubing, quick connect fittings.
Tygon hose with metallic sintered particulate filter. Suitable for detector GasAlertQuattro, GasAlertMax XT and GasAlertMicro 5 PID.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW FLEX and BW ICON Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Reducer for mounting on gas cylinder for manual testing or calibration of diffuse Watchgas gas detectors. Not suitable for use with ractive test gases such as chlorine, ozone, ..
Compatible with standard USB cable.(1062859)
Includes the smart-fix cover for the E-WG200 and the neck strap with double attachment. No PPE.
Float to hang at the end of a sampling hose to prevent the hose from ending up in water.
Sampling hose to attach to the hand pump or motorised pump, hose to be ordered per metre, with a maximum of 30m.
Carrying case to store and transport 4-gas gas detector Gasalertmax XT and accessories.
Hibernation case to gain up to one year extra of operation on two-year CO and H2S versions of the BW Clip.
The SST Dock is an automated test station that allows Bump and Calibration testing and is compatible with the full SST Range in one module. It has the capability to be connected via Wi-Fi, BLE or Cellular and allows for desk, wall and hard case mounted dependent on your application.
Programming cable for Twig Atex One to connect the device to a PC. Attention: charging in an Atex zone is not allowed!!
Release for mounting on gas bottle for testing or calibration of gasdetection devices. To use in combination with dockung station.
Replacement power adaptor for 5 GasAlert-devices.
Filters to protect sensors of the SST4 Micro.
Multi-charger to fit all SST4 detectors. Standard for 5 detectors, expandable to charging station for 20 detectors, a coupling cable (1062815) is required per additional rack (1062814).
Demand flow valve with pressure sensor with connection to docking station (1062077) to provide automatic pressure alert via e-mail or on the docking station. To be used with watchgas gas cylinders for calibration or bumping. Comes with last-o-more tube.
Serves as a standard cylinder-mounted regulator for manual bump testing/calibration of pumped Watchgas detectors.
Male connector for connecting the pumped SST4 device to a sampling tube.
Female connector for connecting the pumped SST4 device to a sampling tube.
Charging station to charge 5 gasdetecting devices Gasalertmicroclip simultaneously.
The IntelliDoX system combines smart docking modules and Safety Suite software to provide automated instrument management for BW Solo gas detectors - helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Filters to protect sensors of the BW Icon, Icon+ and Flex series. Kit with 10 filters.
The rain protector covers the sensors of the multigas monitor from rain and large debris. No PPE
The metal cage protects the multigas monitor against damage. No PPE
External Atex (zone 0) pump for the portable gas detectors BW Flex, BW Microclip XL/X3, and BW Solo without a built-in pump. Suitable for standard and exotic gases. Included: detector connection adapter, short probe, 1m PU probe (for common gases), a set of spare filters, a USB charger, and a quick start guide. For measuring exotic gases, a PTFE-lined hose must be purchased separately. IP66/68 rated for harsh weather conditions. Sampling dis tances up to 25m.
Aluminium bottle of 34 liters with 2 test gases for calibration of gas detectors. To use to calibrate manually or to combine with the MicroDock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%).
Aluminium bottle of 58 liters with 2 test gases for calibration of gas detectors. To use to calibrate manually or to combine with the MicroDock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%) in N2.
Testgas CO 100PPM aluminium cylinder 112L. Only for use in combination with pressure reducer.
Testgas CO 100PPM aluminium cylinder 58L. Only for use in combination with pressure reducer.
Used to depressurise the bottle permanently dedicated to the destruction or recycling. Enables secure transport.
Aluminium bottle of 58 liters with 5 test gases for calibration of gas detectors. To use to calibrate manually or to combine with the MicroDock II. Always use a shutter. Content: CH4 (2,2%), O2 (18%) in N2, 25PPM H2S, 100PPM CO, CO2 (0.5%)
USB charger Twig, without adaptor for device. Not PPE.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW Clip Series, GasAlertMicroClip Series and ConneX1 gas detectors - helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
As spare part of the RigRat.
Aluminium bottle of 58L with test gas CO 50PPM in Air for calibration of Watchgas detectors. To be used for manual calibration or to be combined with the Watchgas docking station SST1/SST4 (1062077) Always to be used with regulator 1062078.
Neckband for gas detector Gasalertclip or GasAlert Extreme to carry on chest. Equipped with security that decouples detector if traction on the neckband.
Holster in black leather and PVC GasalertmicroclipXT and GasalertmicroclipXL gas detector. Supplied with clothing clip.
Charging station to charge 5 gas detectors Gasalertmax XT simultaneously.
Testgas Isobutylene 100PPM cylinder 58L. Only for use in combination with pressure reducer.
Aluminium 34L bottle of testing gas CO 100ppm in oxygen.
Testgas NH3 25PPM cylinder 34L. Only for use in combination with pressure reducer.
Handy carrying strap for Twig around the neck. Man down alert may react differently by using this lanyard.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW ultra Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Carrying cage to store and transport 4-gas gasdetecting device Gasalertmicroclip and accessories.
Manual pump with 30 cm probe, without filter, gasalert microclip.
Replacement sensor screens with gasket, kit of 10 pieces for detector GasAlertMax XT.
Testgas H2S 10PPM aluminium cylinder 58L. Only for use in combination with regulator 1014185.
TestgasN2 100% cylinder 34L. Only for use in combination with pressure reducer.
Testgas NH3 25PPM cylinder 34L, calibrated on N2. Only for use in combination with pressure reducer.
Testgas NO2 5PPM aluminium cylinder 34L. Only for use in combination with regulator 1015148.
Testgas H2S 5PPM aluminium cylinder 34L. Only for use in combination with regulator 1014185.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW Clip4 Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Testgas HCN 10PPM cylinder 34L. Only for use in combination with pressure reducer.
Testgas H2S 25PPM aluminium cylinder 34L in N2.
Atex charger including mains charger to Twig Atex USB cable for charging the Twig One atex devices. Attention: Charging in an ATEX zone is not allowed.!!
To charge max devices and/or batteries simultaneously
Adapter to make an existing Intellidox adaptable to the BW Ultra.
Adapter to make an existing Intellidox adaptable to the BW GasAlert Max XTII.
Keeps the RigRat operational in an atex zone without battery drain.
Universal desktop charger for the SST4 series detectors.
