BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Flame retardant work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have increased visibility. Side pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket and concealed key ring for ID card holder. Ruler pocket with flap and reinforced bottom. Height-adjustable knee pockets. Bottom legs adjustable with press studs. Reinforced bottom hem at the back. Quality: Cantex Weld, 365 g/m² Sizes available: 44-64, 146-156, 84-120 SCAND. Available colours: navy/fluo yellow. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² EBT: 16.0 cal/cm².
Multinorm bib and brace Ambier: Front fly with zipper; 1 patched chest pocket with zip closure; 2 patched slanted pockets; 1 patched thigh pocket; 1 back pocket; 1 ruler pocket; 2 side slits; Knee pockets; 2 elasticated adjustable braces; Flame retardant reflective striping. Quality: 54% modacrylic + 45% lyocell + 1% AST; ± 300 g/m². Available sizes: 44-64, 48-58 (short), 46-56 (long). Available colour: hi vis yellow/navy.
Welding cap with elastic back. Quality: Cantex 1210, 350 g/m².
Eco work jacket with ARC protection.
Multirnom work trousers with arc flash protection, made from 50% FR cotton, 30% Tencel Lyocell, 19% recycled polyester, and 1% antistatic.
"Parka, Gore Tex Pyrad TM Fabric Technology, 2-layer laminated in polyester, waterproof, windproof, breathable (WWB). This parka combinest this WWB principle with the highest protection against heat and flame. Permanently anti-static technology. Industrial laundry at 60°C. Available sizes: S-4XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Multinorm fluorescent bib pants with arc flash protection: Flame-retardant treated waterproof cloth; Premium flame retardant reflective striping; Taped seams provide extra protection; FR cotton lining for extra warmth and comfort; Flame retardant buttons and zipper; Adjustable straps with a durable buckle closure; 4 storage pockets. Quality: Modaflame Rain. Available sizes: S-2XL. Available colors: Hi-Vis yellow / Navy and Hi-Vis orange / navy. Conforms to: EN ISO 11612 A1, A2, B1, C1, E3, F1, EN ISO 11611 class 2 A1 + A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 class 2 APC 2, EN ISO 20471 class 3, EN 13034 Type 6 and EN 343 class 3: 1.
Ladies jaacket Oyora with arc protection: Straight collar Closure with hidden press studs under flap 2 patched chest pockets with flap closed by concealed press studs 2 patched slanted pockets with flap closed by concealed press studs 2 loops for gas detectors Round sleeves Sleeve narrowing by press studs Extended back Double stiched (2x2) flame retardant reflective striping (50mm). Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g/m²Available colors: Navy. Available sizes: 36-56.
Long sleeve polo shirt 203003: Reflective striping, inherent flame retardant, polo collar, flame retardant, anti-static, piqué, bicolor. Quality: 60% Modacrylic / 39% Cotton / 1% Other, 200 g/m². Available colours: Fluo yellow/navy. Available sizes: XS-5XL Complies with: EN 1149-5:2008, EN ISO 11612:2015, EN ISO 13688, EN ISO 20471:2013 Class 2.
"Parka, Gore Tex Pyrad TM Fabric Technology, 2-layer laminated in polyester, waterproof, windproof, breathable (WWB). This parka combinest this WWB principle with the highest protection against heat and flame and arc-flash. Permanently anti-static technology. Industrial laundry at 60°C. Available sizes: S-4XL. Polaire zippable: 1046734.
The Komodo is the hi-vis version of our Jasper ECO jacket. Thanks to the use of the Sio-SafeTM Essential Eco fabric, we have switched to environmentally friendly TencelTM Lyocell and Repreve© recycled polyester instead of the regular cotton and polyester. Although the FR-treated fabric is made with 50% recycled material, the jacket offers the same high-quality protection. It is soft, comfortable and breathable. In addition, this jacket is designed for disassembly, which means that it can be easily taken apart after use. Standards: EN 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5, EN 13034 and EN ISO 20471 class 3. Available sizes: 44R - 64R Available colours: fluo yellow-navy
Hood in 100% polyester with Gore®Pyrad® textile technology (ePFTE membrane). Laminated, to be combined with parka Ebro. Available sizes: S-3XL. Available colours: hi-viz yellow, hi-viz orange, hi-viz red.
Flame retardant softshell Umia with arc protection: Straight collar; Zip closure under flap; 1 patched chest pocket with flap; 2 inset pockets; 1 loop for gas detector; 1 loop for badge; 1 Napoleon pocket; Round sleeves; Sleeve narrowing by touch and close fastening. Quality: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-3XL. Available colors: Navy/fluo yellow.
Flame-retardant and anti-static work jacket 6035 81 with a thin lining. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Completely metal-free. Quality: Tera TX NON-METAL, 260 g/m². Available sizes: XS-4XL. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E1 F1, EN 1149-5, EN ISO 11611 klasse 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 8,1 cal/cm², EBT: 8,7 cal/cm².
Flame retardant ARC T-Shirt with round neck and knitted cuffs. Quality: Cantex Jersey 170AT, 170 g / m². Available colors: Navy. Available sizes: XS-4XL. Conforms to: EN ISO 11612: A1 + A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5.
Inherently flame retardant sweater with arc flash protection. Quality: Modaflame Knit: 60% Modacrylic, 39% Cotton, 1% Carbon Fiber, 300g. Available sizes: S-5XL. Available colors: Navy. Conforms to: EN ISO 11612 A1, B1, C1, F1, EN 1149 -5 and IEC 61482-2 IEC 61482-1-2 class 1 (ATPV 16 cal / cm²).
Flame retardant Hi-Vis work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the work trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have nail pockets. Quality: Cantex Stretch, 365 g/m². Available sizes: 44-64, 146-156, 84-120. Available colours: Fluo yellow/navy. Complies with: EN ISO 11612 A1.A2.B1.C1.F1, EN 61482-2 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 1149-5 and EN ISO 20471 class 1.
Matching detachable hood for parka Sentai. Colour: Navy
Bodywarmer, Guardian H²O, flame retardant, anti-static, zipper under flap, porto phone pocket, 2 lower pockets with velcro closure.
Women's multinorm trousers LESHA with arc protection: Concealed button placket / Zipper fly; 2 inset pockets; 1 patched thigh pocket; 1 stick meter pocket with flap; 1 patch back pocket with flap; elastic waist; knee pockets; Waist with belt loops; Flame retardant reflective stripes (70mm). Quality: Sio-Safe™ Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56 ladies. Available colours: Fluo yellow/navy. Complies with: IEC 61482-2 : 2009 class 1- ATPV 15.2 cal/cm², EN ISO 11612 : 2015 / A1A2B1C1E3F1, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034 : 2005 + A1 : 2009 Type PB [6] and EN ISO 20471 : 2013 +A1 2016 / Class 2.
Flame retardant and antistatic sweater in modacrylic / cotton / antistatic (290g / m²). Round neck, knitted collar and cuffs. This s weater contains reflective (heat seal) stripes and fluorescent accents for improved visibility. Quality: Cantex Terry - 59% modacrylic / 39% cotton / 2% antistatic, 290 g / m². Available sizes: XS-4XL. Available color: navy / fluo yellow. Complies with: EN ISO 11612 A1B1C2F1, EN 1149-5, IEC 61482-2 Class 1 (17.8 cal / cm²), EN 1149-5, EN ISO 20471 class 1.
The balaclava protects body parts that are normally exposed in a protective clothing system. The flame-retardant properties of the fabric offer good protection not only from the cold, but also from heat and flames. The 1:1 rib quality creates a thin, yet protective product. Available sizes: Universal. Available colors: Grey.
Electrician protective face screen with with hood and continuous flap. According to PPE Regulation 2016/425 and according to DIN + EN standards (in particular DIN EN 166 -170 and GS-ET 29, Class 2 (7kA 0.5s) and Class 2++ (10kA 0.5s), Light transmittance ~ 48% = class 2). Arc class: 2++. With ATPV label 35 cal/cm² Hood material: Double layer S451 Indura Ultrasoft 325g/m². Screen dimensions: 250 x 165 mm.
Flame retardant and anti static long john in 60% merino wool/38% Lenzing FR®/2% Beltron®. Cool and comfortable fabric which regulates body temperature, elastic waist band. Available sizes: S-XXL. Available colours: grey anthracite.
Flame retardant polo shirt Telfs with arc flash protection. The polo has flame retardant reflection bands and fluorescent yellow accents. Quality: 54.5% Modacrylic + 44.5% Cotton + 1% AST; ± 220 g / m². Available sizes: S-3XL. Available color: Navy / fluo yellow. Conforms to: IEC 61482-2: 2018 APC1 - EBT 7.4 cal / cm², EN ISO 11612: 2015 / A1 B1 C1 F1, EN ISO 14116: 2015 and EN 1149-5: 2018.
Flame retardant and anti-static t-shirt FR32: Protects against radiant, convection and contact heat; Moisture-wicking and breathable material; Concealed breast pocket; sleeve pocket; Button closure. Quality: Bizflame Knit Antistatic: 99% Cotton, 1% Carbon Fiber 237g/m². Available colours: Gray and navy. Complies with: EN ISO 11612 A1 + A2, B1, C1, F1, EN 1149 -5 and IEC 61482-2 IEC 61482-1-1 ELIM 13cal/cm².
Flame retardant and anti-static long sleeve t-shirt for women in 60% merino wool/38% Lyocell/2% polyester. Cool and comfortable material, regulates body temperature. Available sizes: XS-2XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Hood for welders, 100% cotton Proban®, 340gr./m²,flameretardant,quilted flameretardant wool on the top,a cord closure around the face. Sizes: 1 size.
Gaiters, aluminized para-amide, 500gr./m², Velcro closure, no lining,strap under sole, long-term use. Dimensions: length 36cm.
Matching detachable helmethood (hood can be worn over a helmet ) for the parka Sentai. Colour: Navy
Flame retardant Hi-Vis softshell jacket, very comfortable. Non-metal, wind and water-repellent and with a high arc standard. Ergonomically shaped to work with arms raised. With comfortable heat seal reflection. Concealed zipper front and double storm flap with press buttons. Left breast pocket with flap. Right chest pocket with zipper and loop for telephone cord. Headset holder in the collar. Side pockets with zipper. Left sleeve pocket with flap, concealed key ring and loop for ID pocket. Cuffs on the inside of the sleeves. Tunnel cord bottom of jacket. Quality: Windtech FR 340, 340 g / m², wind and water repellent. Available sizes: XS-4XL. Available colors: Fluo yellow / navy. Compliant with: EN ISO 11612: A1 B1 C1 F1, IEC 61482-2: APC 2, EN 1149-5, EN ISO 11611: CL.2 A1, EN 13034: TYPE PB [6], EN ISO 20471: CL.2 * (XS-S) CL.3 (M-4XL).
Flame Retardant Coverall bizflame FR51: Protects against radiant, convection and contact heat; Class 2 welding protection; Back pleat for more freedom of movement; Adjustable hem for all leg lengths; adjustable cuffs; UPF 40+ fabric blocks 98% of UV radiation radio loops; 10 storage bags; knee pockets; Concealed zipper. Quality: Bizflame Plus: 99% cotton, 1% carbon fiber 350g/m². Available colors: Navy and Orange. Available sizes: XS-2XL. Complies with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 2 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-1 Elim 8.6 cal/cm² and IEC 61482- 2 IEC 61482-1-2 APC 1 (12 ATPV 13.6 cal cm²).
Flame retardant shell jacket for women in a waterproof, windproof and breathable material. Comfortable all-season multi-standard jacket with inherent flame protection. Conforms: EN 61482-1-2 APC 2, EN 61482-1-1 ELIM: 27 cal/cm², EN ISO 11612 A1 A2 B1 C1 F1, EN ISO 11611 A1 A2 class 1, EN 1149-5, EN 13034 Type PB [6], EN ISO 20471 class 2 in sizes XS-S and class 3 in sizes M-4XL and EN 343 class 3/4.
Overall Industry flame-retardant treated cotton: - Concealed button closure at centre front - Single layer chest pockets with safety fl ap and button closure - Slanted side pockets - Side vents with safety fl ap and button closure, behind side pockets - Kneepad pockets - Adjustable waistband for improved ergonomics and ultimate comfort - Single layer back pocket with safety fl ap and button closure on RHS - Single layer tool pocket on RHS leg Quality: 60% cotton / 39% polyester / 1% AST, 360 g / m². Available sizes: 48-66. Available colors: Navy. Complies with: EN 1149-5, EN ISO 14116, EN ISO 11611 class 1, and ISO 11612 A1B1C1E1F1.
Flame retardant and antistatic signaling fleece with arc protection. Upright collar; Zipper under flap with velcro fastener; 2 inset pockets with zipper; Rounded-in sleeves; Elastic in sleeve end; Elastic cord in hem. Quality: 54% Modacrylic + 34.2% FR cotton + 10% polyamide + 1.8% AST; ± 310 g / m². Available sizes: S-3XL. Available colors: Fluo yellow / navy. Compliant with: IEC 61482-2: 2009 class 1 - EBT 10.7 cal / cm², EN ISO 11612: 2008 / A1 B1 C2 F1, EN ISO 14116: 2008 / Index 3 / 25H / 40, EN ISO 20471: 2013 / Class 2, EN 14058: 2004 / Class 1 xxxx and EN 1149-5: 2008.
Flame retardant women's work trousers with stretch for the right fit and increased comfort during work that requires optimal freedom of movement. Quality: Tera TX, 260 gsm. Available sizes: 36-48. Available colours: Navy/fluo yellow. Complies with: EN ISO 11612 A1 B1 C1 F1, EN 1149-5, EN ISO 20471 Class 1, IEC 61482-2 CL.1, ARC RATING: 9.5 cal/cm².
Trousers 80572 multirisk.
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: ▪ High in 1 piece upright closing collar with wide closure. ▪ Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. ▪ YKK anti-panic crystal closure with a waterproof flap and velcro closure. ▪ Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. ▪ Pre-formed 3D sleeves with insert. ▪ Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! ▪ Equipped with external elbow protection and reinforced sleeve ends. ▪ The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. ▪ Extended back for better protection.
This winter coverall with Arc Protection Class 2 also keeps you visible day and night with its fluorescent colour and segmented reflective stripes. The 6 pockets on the outside are all covered with a flap just like the zipper at the front and at the leg ends, so no water penetration is possible. A hood, available separately, can be attached to the straight collar or stored on the pocket inside. Quality: - 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available colors: Fluo yellow/navy and fluo orange/navy. Available sizes: S-3XL.
Electrician protective face screen with hood according to PPE-regulation 2016/425 and corresponding to DIN + EN standards (especially DIN EN 166 and GS-ET 29, class 2 (7kA 0,5s) and class 2++ (10kA 0,5s), Light transmission >50% <(><<)> 75% = class 1; CE 0340; With ATPV label 17 cal/cm². Dimensions: Total: 450x250 mm Screen: 250x165 mm Quality: Hood: NOMEX inside antistatic, NOMEX III outershell antistatic Screen: Polycarbonat in line with: EN 166+EN167+EN168:2002-04, EN 170:2003-01 and GS-ET 29:2019-06. Available colours: blue Available sizes: one size
High-visibility eco work jacket with ARC protection (APC1). Made from 50% flame-retardant cotton, 30% Tencel Lyocell, 19% recycled polyester, and 1% antistatic.
Multinorm parka Beltrum with arc protection: Straight collar; YKK zip closure under flap; 1 inset chest pocket with flap; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket; Round sleeves; Sleeve narrowing; Elastic drawstring in front hem; Elongated back tail. Quality: 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available sizes: S-53XL. Avialable colors: Fluo orange.
Face shield against arc flash for the electrician with continuous flap. Face protection against electric arcs for short-term switching work and other work that must be performed under or in the vicinity of undervoltage parts. This face shield provides no mechanical protection. Spare visors available separately. Window material: 1.5mm thick acetate, Quality: NOMEX 3T/A. In accordance with: EC type test according to EN166-170 and GS-ET-29 (CE0340) Arc class 2. (7 Ka-0.5sec-350mm) Additional test with 8.3kA-0.5sec-350mm. light transmission >75% = class 0.
Flame retardant, antistatic with ARC protection and at the same time comfortable: the most important assets of the Tiolo. This T-shirt with round neck and long sleeves feels very light. The Tiolo is finished with elastic wrist bands and has good moisture-regulating and antibacterial properties. Quality: 60% Modacryl + 38% cotton + 2% AST; ± 220 g / m². Available sizes: XS-4XL. Available colors: Marine. Complies with: EN ISO 11612 A1B1C1F1, EN 1149-5, EN ISO 14116 and IEC 61482-2: 2009 class 1 - ATPV 5.7 cal / cm². PPE category: 3.
Light flame retardant shirt with Hi-Vis accents and reflective striping. Concealed press stud fastening on the front. Includes limited protection against chemical splash. Chest pockets with flaps. Completely metal-free. Available colors: Navy / Yellow and Gray / Yellow, 160g / m². Available sizes: XS-4XL. Conforms to: EN ISO 11612: A1 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5, EN ISO 20471 Class 2 and EN 13034 Type PB 6, TRANEMO SKINSAFE (ARC RATING: 5.8 cal / cm²) .
Multinorm parka with arc protection: Straight collar; YKK zip closure under flap; 1 patched chest pocket; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket; Round sleeves; Flame retardant reflective tape. Quality: 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Multinorm softshell Hollum with arc protection: Straight collar Zip closure under flap; 1 patched chest pocket with zip closure; 2 inset pockets; 1 loop for gas detector; Round sleeves; Sleeve narrowing by touch and close fastening; Elastic drawstring in hem. Quality: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-5XL. Available colors: Fluo orange. Compliant with: IEC 61482-2 : 2018 APC1 - ATPV 24,3 cal/cm², EN ISO 11612 : 2015 / A1 B1 C2 F1, EN ISO 14116 : 2015 / IND.3, EN ISO 11611 : 2015 / Class 2 - A1, EN 1149-5 : 2018, EN 13034 : 2005 + A1 : 2009 Type PB [6], EN ISO 20471 : 2013 +A1 2016 / Class 3 and EN 14058 : 2017 / Class 1 3.
Flame retardant work jacket with additional Hi-Vis reinforcement on the shoulders for increased heat protection. The work jacket is made in a strong and supple satin, specifically developed for work with zinc and chemicals. Concealed front closure with press studs and jeans button. Chest pockets with flap. Side pockets with flap. Three inner pockets. Adjustable cuffs. Contrasting seams. Quality: Apex 300, 300g/m². Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, EN ISO 11611 Class 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 9.4 cal/cm² ATPV: 12.0 cal/cm².
Flame retardant and antistatic poloshirt in 60% Protex®/39% Viloft®/1% AST (180g/m²). Press-stud closure, long sleeves, stitched seams, very soft and moisture regulating properties. Available sizes: S-3XL. Available colours: navy, grey.
Multinorm softshell 5195 with arc flash protection, concealed front zip and double storm flap with press studs. Chest pockets with zip. Side pockets with zipper. Cuffs on the inside of the sleeves. Drawstring at the bottom of the jacket. Comfortable heat seal reflection. Quality: Windtech FR 550, 550 g/m², wind and water resistant. Available sizes: XS-4XL. Available colours: Fluo yellow/navy. Complies with: EN ISO 11612: A1 B2 C2 F2, IEC 61482-2: APC 2 (40.0 cal/cm² EBT: 44.0 cal/cm²), EN 1149-5, EN 13034: TYPE PB[6], EN ISO 20471: CL.2
Flame retardant jacket designed to be worn over flame retardant garments. Made from a comfortable, lightweight, highly innovative flame retardant twill fabric Quality: Bizflame Plus: 99% Cotton, 1% Carbon Fiber 210g. Available sizes: S-3XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2, B1, C1, E2,F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5 and ASTM F1959/F1959M-14e1 ATPV 9.1cal/cm².
Flame-retardant and antistatic bodywarmer, made of 99% polyester and 1% antistatic material. This bodywarmer can be zipped into the Miramas parka (item 1056313).
Work jacket with arc flash protection, welding class 2. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
The Mulitnorm Bicolor Work Pants protect against various residual risks from the work environment. Quality: 74% Cotton / 25% Polyester / 1% Carbon, 320 g / m² Available colors: Fluo yellow / navy. Available sizes: Size range 42-66 NL. Conforms to: EN 1149-5: 2008, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, EN ISO 20471: 2013 Class 1, IEC 61482: 2009.
Hi-vis polo with ARC protection: Lay-flat collar; Closure with hidden buttons under flap; Long sleeves; Flame retardant reflective tape. Quality: 54.5% modacrylic + 44.5% cotton + 1% AST; ± 220 g / m². Available sizes: S-4XL. Available colours: Fluo yellow. Compliant with: IEC 61482-2: 2009 class 1 - EBT 7.4 cal / cm², EN ISO 11612: 2008 / A1 B1 C1 F1, EN ISO 14116: 2008, EN ISO 20471: 2013 / Class 3 and EN 1149-5: 2008.
Flame retardant ladies T-Shirt with long sleeves and round neck. Hi-Vis accents on the sleeves. Ribbed cuffs. With heat seal reflection. Available sizes: S-2XL. Available color: navy/fluo yellow. Complies with: EN ISO 11612 A1 B1 C1, EN 1149-5, IEC 61482-2 CL.1, ARC RATING: 5.1 cal/cm².
Head covering, aluminised para-aramid or carbon:aramide, 500gr./m²,cotton Proban lining, 330gr./m². Integrated steel helmet, with protection over the shoulders and face shield made of Triplex 200 x 100 gold damped, a wire mesh face shield can be attached to some models.
Flame retardant arm protection in a light and comfortable fabric with extremely good protection against welding. Adjustable elastic at the top. Elastic at the bottom. Length 52 cm. Delivery per pair. Quality: 191: Graphite, 240 gsm. Available sizes: Universal. Available colours: Gray. Complies with: EN ISO 11611 class 1 A1.
Multirnom work jacket with arc flash protection, made from 50% FR cotton, 30% Tencel Lyocell, 19% recycled polyester, and 1% antistatic.
Sleeve, aluminized Kevlar, 500gr./m², knitted cuff, narrowing at bicepwith Velcro, length 40 cm.
Flame retardant shirt with Hi-Vis accents and reflection striping on the sleeves. Concealed press stud fastening on the front. Chest pockets with flap. Completely metal-free. Available colors: Navy / Yellow and gray / yellow. Available sizes: XS-4XL. In accordance with: EN ISO 11612: A1 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5, TRANEMO SKINSAFE (ARC RATING: 5.2 cal / cm²).
Welding trousers Bizflame FR06: 100% Metal Free; Protects against radiant, convection and contact heat; Certified against molten metal splash; Industrial wash at 75°C and machine dry 155°C; antistatic; Flame Retardant Industrial Washable Striping; knee pockets; 8 storage pockets. Quality: Bizflame Ultra: 80% Cotton, 19% Polyester, 1% Carbon Fiber 340g. Available sizes: 30-46 PW. Available colours: Royal blue and grey. Complies with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 Class 1 and EN 13034 Type PB [6 ].
Flame retardant ladies T-Shirt with round neck and long sleeves. Extended back. Quality: Merino RX, 200 gsm. Available colours: Black/grey. Available sizes: S-2XL. Complies with: EN ISO 11612: A1+A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5, TRANEMO SKINSAFE, ARC RATING: 5.5 cal/cm².
Lightweight work trousers with arc flash protection. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Work trousers with concealed zip, 2 inset side pockets, 2 back pockets with flap, ruler pocket with flap, thigh pocket with flap, knee pockets, extra insert at crotch to prevent tearing out, reflective tape. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin weave + DWR, 280 gr / m2. Available sizes: 44-66, lengths 14-57 and belly sizes 24-29. Available colors: Black / gray, cornflower blue / navy, gray / red and gray / blue. Conform: EN ISO 11611 class 1, EN ISO 11612 A1A2B1C1E2F1 and IEC 61482-2 class 2.
The Aksdal multirisk coveral is equipped with many pockets, including a sleeve pocket, a thigh pocket and a Napoleon pocket. Quality: -3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available colors: Fluo yellow/navy and fluo orange/navy. Available sizes: S-3XL.
Multinorm FR76 long sleeve polo: The inherent flame retardant qualities will not diminish; Premium flame retardant reflective striping; Ribbed cuffs for warmth and comfort; 100% Metal Free; UPF 50+ fabric blocks 98% of UV radiation; antistatic; Keeps its shape. Quality: Modaflame HVO Knit: 66% Modacrylic, 32% Polyester, 2% Carbon Fiber 220g. Available sizes: S-3XL. Available colours: Fluo orange. Complies with: EN ISO 11612 A1, B1, C1, F2, EN 1149 -5, EN ISO 20471 Class 3, IEC 61482-2 IEC 61482-1-2 Class 1 and IEC 61482-2 IEC 61482-1-1 ATPV 6 CAL /cm2 (HAF 71.7%).
Softshell Modaflame MV73: Inherently flame retardant; Protects against radiant and convection heat; zip pockets; Adjustable drawstring in the hem; adjustable cuffs; 3 storage pockets; radio loops; Flame Retardant Reflective Striping wind resistant; Quality: Modaflame Softshell: 100% Polyester 95gr. laminated to a flame retardant TPU membrane 35grams composed with an inherently flame retardant Fleece 60% modacrylic, 39% cotton and 1% carbon fiber 220gr, total fabric weight 350grams 350g. Available sizes: S-3XL. Available colors: Navy. Complies with: EN ISO 11612 A1 B1 C2, EN ISO 11611 Class 2 A1, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 APC 2, IEC 61482-2 IEC 61482-1-1 ELIM 11 CAL/CM² and EN 13034 Type PB (6).
Flame retardant women's boxer shorts in a soft jersey with 20% recycled cotton. Elastic at the waist. Mid-rise waist, regular leg length. Lined crotch area. Quality: Cantex JL, 210 gsm. Available colors: Navy. Available sizes: S-2XL. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, IEC 61482-1-2 CL.1, ELIM: 4.3 cal/cm², EBT: 4.5 cal/cm².
Multirisk bib and brace trousers from the Havep Force+ range with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, adjustable shoulder straps with elastic. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available sizes: 44-66 Havep. Available colors: Blue / gray. Norms: EN 1149-5, EN 13034, EN ISO 11611 (front class 2), En ISO 11612 and IEC 61482.
Hi-vis coverall with arc protection. The coverall has double stitched reflective FR strips for increased visibility. In this flame retardant anti-static coverall you are protected from heat and metal splashes, but you feel comfortable because of the light, breathable and supple fabric with moisture-regulating and flame-retardant properties. Increase your comfort by inserting knee protection into the knee pockets that are provided and narrow your sleeves for a perfect fit. The Fareins retains its shape as the coverall is shrink and pilling resistant, even after frequent washing. Available colors: Fluo yellow/navy. Certification: EN ISO 20471 Class 3, EN ISO 11612 A1A2B1C1E3F1, EN 11611 Class 1/A1/A2, EN 1149-5, EN 13034-6, IEC 61482-2 Class 1.
