BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Half face mask designed to work to complete the Claenspace PAPR systems. Compatible with all Cleanspace Respirators. Clips quickly onto the power units and are easily unclipped for cleaning. Made of soft silicone that readily moulds to the face and doesn't cause allergic dermatitis.
Gas filter A2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C. To use with half and full face Sundstrom masks.
Pouch to attach to belt 1057147.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. The unit consists of a regulator, pre-collector and main filter (SR 292), all of which are mounted in an enclosing steel sheet stand. The unit can be placed on the floor or mounted on a wall. The pre-separator has automatic drainage, separates coarser particles, water and oil. The SR 292 main filter consists of a carbon filter part (500g) , surrounded by two P3 particulate filters. The air is cleaned to remove any remaining particles/gases/vapours/odours. A Y coupling that increases the number of outlets is available as accessory. A maximum of 3 people can be connected.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEK CO P filter for protection agiainst CO and from vapours and mists that may originate in case of fire, dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia ant its derivates, as well as dusts, fumes and mists. Suitable for use in ATEX environments.
Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.
Replacement hood for breathing hood S-855E in PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
Adjustable head harness with contoured air duct, aiflow indicator and sweatband for T-Airline 1000 Hoods
Large sized full face mask made of high quaulity elastomere. Can be used as a negative pressure mask with standard connection screwfilters and is also compatible with the 3M Versaflo TR-600 ane TR-800 powerd air systems including particulate, gas and vapour and combination filters. The PC visor provides a good field of vision and the front-mounted speech diaphragm helps provide communication. The 5 point rubber head harness helps provide a secure stable fit and the side-fitting filter and clear inner mask help ensure good downwards visibility.
Prefilter + cover for power systems cleanspace (for standard P3 filters) set of 20 pieces.
Output for 3 persons / compressed air hoses to be installed on Aircare filter system.
Escape hood on compressed air for very toxic conditions and/or places where can be a lack of oxygen. The escape mask consists of a hood with an integrated rubber half-mask. The bag contains a 3 litre, 200 bar metal filled air cylinder. As soon as the bag is opened, the breathing air is automatically activated. While wearing the mask, the user sees a continual indication of the amount of escape time that remains. Bag can be used to carry escape set while it is closed or opened. Working time: at least 15 minutes. Weight: 6 kg. Flow rate: approx. 35 l/min.
Full-face mask specially designed for the Cleanspace Work system, quick and easy fitting, wide panoramic visor, inner mask made of soft silicone. This mask is NOT suitable for use in ATEX environments.
Half-mask Work size large (including a CleanSpace fabric headband) is designed for use with the CleanSpace WORK Power Unit. Easy to attach to the power unit.
Half-mask Work size small (including a CleanSpace fabric headband) is designed for use with the CleanSpace WORK Power Unit. Easy to attach to the power unit.
AE1HGP3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C ,sulfur dioxide and hydrogen chloride, mercury and toxic dust, vapour and smoke particles.
Anti static rubber 20m hoses offering outstanding aging qualities and longservice life. Resistance to sparks and scorching.CEJN safety couplings that are quickand easy to connect yet prevent accidental disconnection. In line whith: EN14593, EN14594
PVC hoses 20m offering outstanding aging qualities and long service life.Resistance to sparks and scorching.CEJN safety couplings that are quick and easy to connect yet prevent accidental disconnection.
Heavy duty welding helmet G5-01 without welding filter and neck or head protection, with replacement shell. Designed for heavy welding and grinding and can be connected to the Adflo powered protection for a TH3 class respiratory protection (NPF500). Cassette (available separately). Conforms to: EN379/ EN175.
3M™ Versaflo™ BT-63 Length Adjusting Breathing Tube is designed to be used with 3M™ Full Facepiece Respirators 7907 S Series, 6000 Series, and half face masks 7500 Series and the 3M™ Versaflo™ Powered Air Purifying Respirator TR-600 and TR-800.
Pre filter holder for fan unit SR500 EX.
Oil and chemical resistant compressed air hose with a diameter of 10/16mm made of polyester reinforced with PVC, fitted with safety couplings CEJN 342. For use with the SR99-1 filter unit.
Protection sleeve breathing hose Adflo. No PPE.
Complete kit with SR 500 fan unit and protective helmet SR 575 with polycarbonate visor. Contains, SR 500 fan unit, SR 580 helmet, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: 500.
Plastic carry bag with belt for protecting half masks against dust and dirt. Can be worn over the shoulder or around the waist. Suit able for: processes involving chemical risks.
Disinfectant fluid for responsible cleaning of rubber masks, medical equipment and plastic or metal parts. Disinfect for 15 minutes with a 1% solution of this product. Desinfecto kills bacteria and mildew, deactivates viruses, is non-flammable and biodegradable. B ottle containing 1 litres, pH value 6.7.
Black compressed air hose, 20 m, rubber. Extremely robust hose for extreme conditions, hose does not collapse even if a forklift truck is driven over it. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Fitted with male and female RECTUS 96 safety quick-couplings.
Dust mask, class P3, for toxic dust. The silv-air classic is lightweight and the shape adjusts to the face to get a good seal. Exhalation valve ensures lower exhalation resistance and low C02 and humidity in the mask.The collapsible design of Piccola makes it easy to store. The mask is individually packed and sealed. NPF: 50.
Replacement hood T-airline Chem 3 (x2)
Screwfilter AXP3 only to use with motorunit Proflow 3 EX120 (1033156).
Full face mask for use with Cleanspace ultra and Cleanspace EX. The face mask is positive pressure with a silicone outer visor seal and silicone ori-nasal inner mask for superior respiratory protection. Easily to (dis)connect. In line with EN12942
Prefilter for standard P3 filters, for cleanspace motorunits. Set of 10 pieces.
The NH15 Escape Hood is specifically designed for users in an emergency incident. The NH15 is rated for 15 minutes and is available in 3 sizes. It does not require maintenance or fit testing and has a 5 year shelf life.
Cleanspace P3 filter suitable for all Cleanspace PAPR power units.. Set of 3 filters. Weight: 21g.
Particle-filtering folding mask with exhalation valve, protection level FFP2. Ergonomically adapted for large face shapes, innovative design with optimized shape, soft material edges for high wearing comfort. Continuous adjustable head band for a comfortable and secure fit. Inidvidually packed. Flexible and adjustable nose clip, compatible with Uvex eyewaer. Soft sealing lip (nose area) guarantees a secure comfortable sealed position of the mask. Activated carbon filter for odors, gases, and vapors below limit value.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with RPB PX5 motor unit or on compressed air line. For medium to heavy applications. Respiration, face and head protection in one. Includes: air hose, and FR face seal and FR shoulder cape.
P1 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M h alf and full face masks when used with filter holder 603 and dust filter holder 501. Protects against irritating dust, mist and smok e particles.
Fire-resistent seal for the head shell as accessory of hoods M-106, M- 107, M-306, M-307. No PPE.
CST half mask (including a CleanSpace CST head harness) is designed for use with the CleanSpace PRO Power Unit (CST1002) and CleanSpace ULTRA Power Unit (CST 1012).Made of soft silicone that moulds easily to the face and does not cause allergic dermatitis. Easy to attach to the power unit, the head harness easily attaches to the connection points and can be removed for cleaning.
Half-mask Work size Medium (including a CleanSpace fabric headband) is designed for use with the CleanSpace WORK Power Unit. Easy to attach to the power unit.
Bottle for long-lasting, effective anti-fogging treatment and intensive anti-static treatment of lenses in masks, visors, glasses, etc.
Very sturdy motor unit in impact-resistant plastic to be combined with head covers. To be used with 2 dust and/or gas filters with standard DIN 148 thread; these filters can also be used on half-face and full-face masks. Class 2 gas filters work as class 1 filters when used with these units, max. concentration is therefore 0.1%. Device is equipped with a low-flow alarm and electronics for maintenance. Not for confined spaces. Battery life: approx. 7-15 hours. Flow Rate: min. 160 L/min. Weight: 1.4 kg. NPF: dependent on the mask used. Included : battery, charger and comfort belt.
Air flow indicator Adflo
Filter cover in ABS as spare part for motor unit Versaflo. No PPE.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Suitable for wall mounting. Can be ordered with 3 way 1002713 and 1014794 output clutches. For use with compressed air hoses with maximum length of 10m.
Evacuation hood with full-face mask in overpressure, for potentially high concentration gas leaks, no degradation of components by H2S, on compressed air 2L-filled composite bottle, working time 15 min. Can be used in the event of oxygen deficiency. Can be maintained. Weight: 4.7 kg.
Particle-filtering preformed mask with exhalation valve – ergonomically adapted for smaller faces. Four-point headband attachment and flexible, adjustable nose clip for a comfortable, secure fit. Very soft, all-around sealing lip for optimal wearer comfort and secure fit. Exhalation valve to further reduce breathing resistance, by helping to minimise moisture build up inside the mask. Version : FFP3 NR D preformed mask with valve .EN 149 89/686/EEC.
Reusable FFP Mask with a very low breathing resistance. AirWave® Pleated Filter for comfortable breathing and fatigue-free work. Longer use time, less consumption ProValve: Built-in valve, reduces condensation from exhaled air. Comfortable full-face seal made of washable TPE material which is gentle on the skin. DuraMesh®: strong and durable structure, keeps the mask in shape. ActivForm®: no nose clip needed Length-adjustable loop strap with clip for quick, simple and safe on and off. Single packed, 5 pieces in box. Tested and certified to EN 149:2001+A1:2009. All Moldex products and packages are 100% free off PVC.
Cover for expiration valve for full face masks of the 6000 series of 3M.
Uncoated polycarbonate screen as spare spart of hoods M-106, M-107, M-306, M-307, M-406, M-407. No PPE.
Silver coloured, metal glasses frame to click into 3M series 6000 and 7000 masks, corrective lenses not included.
The 3M™ Speedglas™ 9100FX/ 9100 FX-Air extended coverage for the crown portion of the headgear is for use with 9100FX/ 9100 FX-Air welding helmet assemblies to help protect user from welding spark and spatter on the top portion of the head and neck.
This ready-to-use kit includes a PF-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1235E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatible with 3M filters DT-Series.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Inside of mask equipped with comfort pad for better sealing. Equipped with individually adjustable, elastic head bands. NPF: 50. Planet version, manufactured from 26.5% recycled material.
Very light and compact mask. The cartridges are profiled to give a perfect field of vision. Featuring a quick release harness with a djustment points for optimal comfort. The inner half-mask has 2 inhalation valves to prevent fogging. Mask comes with 2 ABEK1P3 filters that can be replaced.
Industrial Air hood with safety helmet SR 575 to be combined with motor unit SR 500/ SR 500 EX or SR 700, and with SR 507 for use with compressed air.Transparent visor in PC. Air channel leads to the visor to avoid fogging of the visor. Lightweight construction with low centre of gravity ensures a balanced and ergonomic fit. Adjustable head harness ensures secure and personalised fit.A wide range of accessories makes the helmet suitable for different applications.
Test liquid for performing fit test. Content: 55 ml.
Rubber hose with female and male standard threaded connection EN 148-1. Connects between filter and mask. Allows filter to be worn on the hip (in combination with separately supplied belt 1002677).
Lightweight breathing hood made of WEB 24 with PE visor. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.
P1 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Front seal as spare spart of hoods M-306, M-307, M-406, M-407. No PPE.
