BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
With a D-ring at each end. Suitable for use in ATEX Zone 1 and for one user only.
Universal anchor point for one person with a protective sleeve. Suitable for structures with sharp edges.
Anchor point for one person, suitable for horizontal or vertical I-beams with a width of 100 to 340 mm. For use only as a vertical anchor point (overhead). Suitable for use in Atex environments.
Temporary horizontal lifeline with a maximum length of 18m, easy to install. Durable plastic housing with a carrying handle and tension indicator. Built-in shock absorption mechanism to limit impact forces during a fall. Suitable for two people and can be used in Atex Zone 1 environments.
Temporary, portable, and freestanding anchoring system for use on TPO roofing or concrete surfaces. The anchor point is equipped with an energy absorption system. The bottom plates have a rubber anti-slip backing. Consists of 4 cast plates and 12 top plates, each weighing 25 kg (55 lbs), (total weight: 416.5 kg). May only be used with all associated components. Suitable for 1 person.
- Fall arrest device with 10-meter cable and rescue winch - With internal energy absorber - Carabiner with fall indicator - Plastic housing - Suitable for confined spaces - vertical use - Weight: 7.40 kg - Maximum user weight: 140 kg (vertical use) - EN360 - Atex - With adapter 1063982, this can be mounted on tripods 1063976/1062545
Fall arestor 30-meter stainless steel cable, fully sealed housing, suitable for use in extreme weather conditions. With stainless steel musketon with fall indicator, convenient handle. Suitable for vertical use only. Max user weight: 140kg
Adaptation kit to attach fall arrestor kalypso 10m with winch (1063977/1063978) to tripod 1062545/1063976.
Work and rescue winch, mountable on Kratos tripods. Suitable for lifting or lowering materials (minimum weight: 60kg, maximum weight: 250kg - in accordance with the Machinery Directive) and persons preferably wearing a seat harness. In case of rescue, the victim may only be lifted upwards. Max weight person: 135kg. Stainless steel cable 4.8mm. Suitable for use in Atex environments. Complies with Machinery Directive 2006/42/EC, EN 1496:2017 Class A, EN13157:2004, Atex Directive 2014/34/EU.
Work and rescue winch, mountable on Kratos tripods. Suitable for hoisting or lowering materials (min. weight: 60 kg, max. weight: 250 kg - in accordance with the Machinery Directive) and persons wearing a seat harness. In the event of an evacuation, the victim may be hoisted, or lowered a maximum of 2 m. Maximum person weight: 135 kg. 6 mm synthetic rope. Suitable for use in Atex environments. Complies with Machinery Directive 2006/42/EC, EN 1496:2017 Class B, EN13157:2004, Atex Directive 2014/34/EU.
Automatic descent and evacuation device for one person. Suitable for rapid rescue operations. Descent speed of approximately 2 m/s regardless of weight (max. user weight: 141 kg). Includes 20m of 9.6 mm kernmantle rope with two carabiners and a handy carrying bag. For use by one person.
Steel carabiner, automatic locking, opening 16mm, weight 160gr, breaking force 25kN.
Stainless steel carabiner with automatic locking, opening 16.5 mm, 210 g, breaking force 23 kN.
Exoskeleton to protect the housing of the fall arrestor Helixon-S, especially during horizontal use. Attaches with 4 included screws.
Exoskeleton to protect the Helixon-S fallarrestor housing, especially during horizontal use. Attaches with 6 included screws.
Lanyard in 11mm thick sharp edge kernmantel rope with aluminum self-locking hooks (1 scaffold hook and 1 small carabiner).
Lanyard made of 11mm thick, sharp-edged kernmantel rope with self-locking aluminum hooks (one scaffold hook and one small carabiner). Maximum user weight: 140kg.
Lanyard, 2 meter length, consisting of elastic strap with integrated shock absorber. Fitted with one aluminium standard carabiner and two aluminium with big opening (60mm) and a fall indicator. Capacity up to 140Kg. Serves as connection between anchor point and harness. Suitable for use with sharp edges.
Lanyard made of 30mm wide polyester webbing with a damper, specially designed to protect operators working at height in environments with potential electrical hazards. Maximum user weight: 100kg.
Double lanyard made of 30mm wide polyester webbing with a damper, specially designed to protect operators working at height in envir onments with potential electrical hazards. Maximum user weight: 100kg.
Kernmantel rope 11mm diameter with aluminum snap hooks, including one scaffold hook. The seams are protected by a strong, transparent protective sleeve that protects the ends and makes the seams visible, making inspection before use easy. For positioning only.
Kernmantel rope with a diameter of 12mm, assembled with a non-removable rope clamp and energy absorber. It features a steel snap hook (manual locking) on one end of the rope and a knot on the other. Suitable for use near sharp edges. The rope stitching is protected by a strong, transparent protective sleeve that also facilitates visual inspection of the seams before each use.
Double lanyard for attaching to the tool loop of a harness on one side and two tools, each weighing up to 5 kg, on the other. Maximum length: 130 cm.
Stretch lanyard for attaching to the tool loop of a harness on one side and a tool weighing up to 5 kg on the other. Max. length: 130 cm
Hands-free system, instant and continuous communication Bluetooth compatible- connect to wireless headsets and Bluetooth enabled phones Multi channel use and group settings within channels Unlimited users Easy set up and configuration Up to 11 hour battery use Quick charge in under 4 hours High-definition audio quality Patented noise filter 900 MHz License-Free Frequency 3 Channels of communication royaltie-free frequencies in accordance with European radio regulations (ETSI) weight: 190g dimensions: 70x110x28mm
The configurator-charger recharges Guardian (plus) terminals and batteries. Can charge and configure 4 terminals/batteries at the same time Intuitive touch screen. Includes a power connector that can be used in conjunction with charger. Extensions to connect a larger number of terminals/batteries.
Very high quality microphone. In combination with earplugs, it provides good communication in noisy environments. Weight: 12 g. With foam, wind protection. Compatible with right and left.
Noise-cancelling HEADSET EPI audio with microphone and neckband
VOK-GUARD-EU-KIT-4-BT-NH This kit contains 4 mobile radio terminals Guardian, 1 battery charger (with configurator), 1 small hard case (HAC 404), 1 user guide, power supply and cable
Costs for a hotel stay if the trainer has to travel a long distance for an on-site training.
Neck support size small as a replacement part for Cleanspace Work.
Neck support size medium as a replacement part for Cleanspace Work.
USB-C power adapter 220V/20W
Option for the LOX4 outdoor charging locker (1064583) to equip the charging locker with perforated metal shelves, a heating cable, and an aerosol system. In the event of a significant temperature increase, the heating cable will melt and activate the aerosol. The aerosol can spread throughout the entire locker and cool or extinguish the heated or burning battery. Important: If you require this option, it must be ordered together with the cabinet.
Option for the LOXK1100 battery cabinet (1063272) to equip the cabinet with an aerosol fire suppression system. Upon detection of smoke, the aerosol is immediately activated and dispersed throughout the entire cabinet. The aerosol cools and controls the battery. Note: This aerosol kit is only sold with the cabinet.
Option for the LOXK12 battery locker cabinet (1063274) to equip the cabinet with an aerosol fire suppression system. Upon detection of smoke, the aerosol is immediately activated and dispersed throughout the entire cabinet. The aerosol cools and controls the battery. Note: This aerosol kit is only sold with the cabinet.
High-cut chemical glove. Strong grip. 18-gauge HPPE liner. FOOD approved Sizes: 6-11, length: 350 mm. Compliant with: EN388:2016 4.X.4.3.F, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 EN407: X1XXXX
Looking for a sporty and agile safety shoe? The ultra-light E-BOUNCE S1PS WHITE/LIME lets you move effortlessly. Thanks to the sole that returns energy with every step, you experience a unique "bounce". This allows you to work comfortably, fit and optimally protected all day long. Lightweight and dynamic Energy-returning sole Non-slip sole Sizes 36-40 made on a narrow last
High-visibility work jacket with ARC protection (APC1).
Multirnom ECO work jacket with arc flash protection, made from 50% FR cotton, 30% Tencel Lyocell, 19% recycled polyester, and 1% antistatic.
Work jacket with arc flash protection. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Lightweight work trousers with arc flash protection. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Work jacket with arc flash protection, welding class 2. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Work trousers with arc flash protection, welding class 2. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Inherently flame-retardant Multinorm work trousers, made from 54% modacrylic, 45% Tencel Lyocell, and 1% antistatic.
Motor unit that is worn on the back of the head, for connection with a half or full face mask. Max. air flow: 230l/min. Weight: 450g. Internal battery charging time < 2h (up to 95%). Up to 2 hours of deployment time possible. IP65. Contents: motor unit, battery, battery charger, carrying case, 2x neck support, quickstart user guide, cleanspace smart app. Filters and mask need to be ordered separately.
Ansell HyFlex 11-814: Ultra-thin, breathable work glove with exceptional sensitivity, strong grip, and excellent comfort – ideal for precision work. 18 gauge. Nitrile foam coating. Sizes: 5-12 Compliant with: EN388: 3121A
Float to hang at the end of a sampling hose to prevent the hose from ending up in water.
Complete kit with Speedglas heavy duty welding helmet G5-03 PRO AIR, adflo motor unit and carrying bag, without welding filter.
Padlock for indoor use only! metal body and wiidth 47mm and shackle diameter of 7mm, with vertical clearance of 22mm. The shackle is made of boron alloy providing maximum resistance to cutting and sawing. Lock can be controlled by smartphone via bluetooth connection. Smart solution to remotely grant permanent or temporary access to users via the app Master Lock Vault Enterprise, available for ios and android devices. CR2450 battery included.
Use your smartphone to open and manage your lock with the Master Lock® safe system compatible with both Master Lock Vault Home and Master Lock Vault Enterprise app (ios & android). Monitor and grant access, with alerts for tampering and low battery. Metal lock body for durability, boron alloy shackle provides maximum resistance to cutting and sawing. Bluetooth authentication and military-grade encryption. Directional backup code for emergency access without a phone. 1 CR2450 Battery included. 57mm thick metal housing and bracket diameter of 9mm, bracket has a vertical clearance of 51mm.
Padlock with combination lock and bluetooth that can be managed with the app Master Lock Vault Enterprise (ios and android). Locks can be assigned to users via the app. Lock is weatherproof against snow, rain and extreme temperatures, making it ideal for outdoor use. 62mm wide metal housing and a shackle diameter of 9mm, the shackle offers a vertical opening of 60mm and provides maximum resistance to cutting and sawing through. 1 batterie CR123A included.
Medium size key safety box. Weather resistant aluminium housing. Mounting kit included. Programmable 4-digit combination lock.
Security locker for keys, large format with removable flexible shackle so it can be hung in different places or permanently fixed to a wall. With a user-definable number combination consisting of 4 digits. Equipped with a weatherproof cover to protect against bad weather conditions. Dimensions: 283x76x56mm.
Padlock with a width of 70mm, housing in stainless steel. The octagonal shackle has a diameter of 10mm and is made of Tough-cut-boron-carbide, which is 50% harder than hardened steel. Covered keyhole. Extremely suitable for outdoor use.
Black Double LED Beanie with Protective Shell This innovative beanie offers optimal protection and visibility in dark environments. Equipped with dual LED lighting and a removable protective shell compliant with EN 812:2012, it combines safety, comfort, and practicality. With a brightness of 150 lumens and a battery life of 2 to 4 hours at full power, this beanie ensures reliable illumination. It features three light modes: High, Medium, and Flashing. Certified CE and RoHS, it comes with a USB charging cable for easy recharging. Available with or without protective shell. Perfect for outdoor work or low-light conditions – stay warm, safe, and highly visible!
Fire Retardant Safety Cap This safety cap is made entirely of 100% cotton, making it both comfortable and flame-resistant. Cotton is a fire-retardant material that provides extra protection in high-risk environments. The cap complies with the EN 812 standard to ensure optimal safety and features an elastic band at the back for a secure fit, preventing it from slipping during work. Thanks to its integrated protective shell, the Fire Retardant cap offers not only impact protection but also fire resistance. Perfect for those who want to combine warmth, comfort, and maximum safety in one product.
The ECO safety cap made from recycled polyester is produced using fibers and a sustainable manufacturing process, reducing its environmental impact. The goal is to promote more eco-friendly practices. This cap features a protective shell compliant with the EN812 standard to safeguard the head against impacts. It is available in black and navy blue, with a 5 cm visor. An elastic strap at the back ensures better stability on the head.
The USB LED headlamp attaches easily to the visor of the cap and can be adjusted to direct light upward or downward. It can be removed at any time. Three light intensities are available to adapt to the working environment (low, medium, and high). It recharges conveniently using the included USB charging cable.
Compatible with bump cap AIR STREAM, DEFENDER en BADECAP.
Very powerful, lightweight rechargeable headlamp with multi-beam and REACTIVE LIGHTING® technology for proximity and distance vision. White or red lighting for stealth. 1100 lumens. Designed for the workshop, small maintenance jobs, or concerts and shows, the SWIFT® RL rechargeable headlamp provides 1100-lumen brightness. With its REACTIVE LIGHTING® technology, a sensor analyzes the ambient light and automatically adjusts brightness to user requirements. It also has red lighting for stealth. SWIFT® RL Pis intuitive, with a single button for easy control over all lamp functions. The five-level gauge allows precise monitoring of the battery charge level. The lamp is compatible with Petzl helmets, and mounting accessories allow it to be attached to a variety of helmet types.
Self-adhesive adapter suitable for mounting Petzl headlamps (Aria, Pixa as of 2025, Swift RL as of 2023 en Xena) on other mark than Petzl safety helmets.
