BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Fleece, 100% polyester anti-pilling, 280gr / m², zipper
Underpants, 60% merinowool 25% polyester 13% polyamide 2% elastane, long johns are made of circular knit fabrik and have no lengthwise seams. A gusset in the back ensures optimal comfort. Cuffs are knitted.
Insole to support the flat longitudinal arch and gives comfortable cushioning.
High shoe S3 heat-resistant in full grain leather Super8, with aluminium toecap and synthetic antiperforation sole. Lining in Cambrelle for excellent moisture absorption. Equipped with X-40 Duo insole. PU/Nitril outsole. Sizes: 35-48. Suitable for general industrial applications.
Dust mask, class P3, for toxic dust. Disposable respirator with a lightweight cup featuring EVA foam under the adjustable nose bridge for extra comfort. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with elastic headbands. NPF: 50.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Inherently flame retardant metal-free switch jacket with Velcro closure at the front for quick doffing. PPE category 4 (>40 cal/cm²). The jacket has fluorescent shoulder pads for extra visibility and is made of supple, wind and water resistant softshell material. Velcro closure at the front. Adjustable cuffs. Quality: Windtech FR 550, 550 g/m², wind and water resistant. Available sizes: S-L-2XL-4XL. Available colours: Navy/fluo yellow. Complies with: EN ISO 11612: A1+A2 B2 C2 F2, IEC 61482-2: CL.2, EN 1149-5 and EN 13034: type PB[6].
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility.
Soft yet robust technical liner, engineered to offer protection against the cold and heat, as well as cut level A4/D protection Exceptional anti-wear properties and double protection against thermal hazards. Extremely durable latex coating with increased resistance around the thumb for extended use. Conform EN388:3X43D EN511: X1X EN407: X2XXXX
Extreme chemical protection: MICROCHEM™ multi-layer barrier. Utilizing unique rubber polymer and plastic laminate technology for extreme protection against a wide range of chemicals. Approved for contact heat up to 100°C/212°F, antistatic according to EN 1149-3 standards and made without natural rubber or silicone, for protection against mechanical risks and allergic reactions. Comfortable unique manufacturing process and nylon liner support for more comfort during use
The X-fit detect, including cord, has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also re duces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate ba g. Colours: blue.
Low shoe in white microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in Smartec Air Sanitized. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D (35-49), XD (37-49).
P filter for motor unit Versaflo TR-300. Protects against highly toxic dust,mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. In line with: EN12941.
Low shoe in grey water resistant full grain leather, with a non-metal anti-perforation sole and a steel 200J toecap. Featuring a breathable, abrasion resistant lining in textile. Sole in PU/Nitril, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Scuffcap resistant against abrasion. Sizes: 37-47.
Low shoe in microfibre with a steel toecap and plastic anti-perforation sole. With Smartec lining for good moisture absorption and an ergonomically comfortable insole. Outer sole in PU/PU. Size: 35-42.
High shoe in waterresistant synthetic textile (100% leatherfree), with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane semi-orthopedic insole with textile layer. Sizes: 36-48.
High shoe in waterresistant oiled leather, with a non metallic antiperforation sole and 200J toecap. Fitted with a breathable, abrasion resistant liner in Coolmax. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, ergonomic insole. Sizes: 35-49.
Leather welding apron. With adjustable braces for a better fit, 1 large chest pocket and 1 front pocket with velcro. Kevlar® stitched seams. Available size: 1 size (91x58cm).
Work trousers in easycare material that ensures good retention of shape and color with extra compartment and extra pocket with zipper. Back pockets with flap and velcro closure. Leg pocket with extra compartment and flap with velcro closure. Folding rule pocket with knife button. The knee protection pockets can be adjustable in two height levels. Reinforcement in holster pockets, folding rule pocket and knee protection pockets. The sizes C42-C64 can be extended by 5 cm. Quality: 65% polyester, 35% cotton. Available colors: red, sky blue, navy, green, khaki, gray and black. Available sizes: C42-C64 (extendable to C142-164), D84-D120.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Short peak (50mm). With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-64cm.
Hi-vis offshore trousers Ambok with arc protection: Front closure with zip; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 1 ruler pocket with flap; Elasticated waist; Knee pockets; Waistband with loops for belt; Double stiched (2x2) flame retardant reflective striping (70mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available sizes: 44 - 64, 48S-58S and 46L-56L. Available colors: Fluo yellow/navy.
Low shoe in Safety Knit® textile. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. BreathActive lining. Outsole in PU/Nitrile, resistant to 300 ° C. Removable, polyurethane insole with textile layer. Sizes: 39-47.
J-Energy series. High shoe in Putek PLUS textile with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D-mesh. Outsole in PU/E-TPU/PU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Non-Metal and Inherent Flame Retardant lab coat. Back length in size L=102 cm, L-Tall +10cm. Concealed front closing with plastic stud fastener. Chest pocket with flap. Front pockets with flap. Adjustable elastic in the back. Adjustable cuffs with plastic stud fastener. Quality: 812: Tera TX TW, 260 g/m², IEC 61482-1-1, ELIM 9,1 cal/cm², EBT: 10 cal/cm², LOI: 29,8% Available sizes: XS - 4XL Specifically for Cargill with D025 sew-on breast pocket
Flame retardant and antistatic hi-viz softshell in 100% polyester with FR PU coating and inherent FR fleece, 3-layer (400g/m²). Straight collar, zip closure with flap and velcro, chest pocket with zipper, 2 inset pockets, 1 gasdetector loop, adjustable cuffs by velcro, stitched seams, FR reflective striping, back length L: 77 cm. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Synthetic glove, Nitrile, 3/4 dipped, Acrylic, Polyester, 10 gg, 13 gg, Sandy finish, Cat. II, Yellow high-viz, black, High-viz colour, Water and oil repellent palm and knuckle, for allround work . EN 388:2003, 4331 EN 511:2006, 02X
Innovative compact folding mask with 7 dynamic parts providing excellent facial movement with maximum comfort. Valved and with inner foam to increase the comfort of the wearer. DOLOMITE optional clogging test. An individual polybag and special flat shape make it easy to store and vending machine ready. Disposable mask FFP3 level, protects against solid and liquid particles of high toxicity. NPF:50.
Flame retardant comfortable sweater with round neck and Hi-Vis accents on the sleeves. 20% recycled cotton. Knitted neck, cuffs and hem. With heat seal reflection. Entirely metal-free. Quality: Cantex Terry, 290 g / m². Available sizes: XXS-4XL. Available color: Fluo yellow / navy. Compliant with: EN ISO 11612: A1+A2 B1 C2 F2, IEC 61482-2: CL.1, EN 1149-5, ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
High shoe with brown water resistant full grain leather upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in POROMAX: antibacterial. Outsole in PU/PU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
Multinorm hood Diablo 12498.
High shoe in black full grain leather, with a aluminium 200J toecap and steel anti-perforation sole. Fitted with a breathable, abrasion resistant Cool comfort and Odor Contorl liner in polyester mesh. Outsole in PU/Nitrile (bio-based recycled rubber), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. With scuffcap. Sizes: W (38-48), XW (38-48), XXW (40-46).
Leather glove, Unlined, 0,6-0,7 mm, Full grain goatskin, Nylon, Cat. II, Blue, white, Elasticated 180°, for fine assembly work . EN 388:2003, 2010
Offshore safety boot in brown full grain leater with steel toecap and antiperforation midsole. Fitted with a leater lining. Entire i nsole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non-slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: 37-48. Suitab le for: offshore applications.
Trousers, 100% polyester, PU coated, 190gr. /m², elasticated waist, reflective tape. Available in: navy blue, black.
Replacement blades of 0.30mm for secutiry knife Secumax 350
Glove with PE and Zirnium. Extremely good cut resistance.
Low shoe in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Semi- orthopedic insole which is conform to ESD. Sizes: 38-48.
Gloves with five fingers, American cut. Palm, fingers and inside of thumb are made of para-amide coated interlock.. The gloves are fully lined with an acrylic/cotton felt. Elastic cuffs, finished with bias binding. The seams are stitched with a para-amide thread, overall length is 50 cm.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Two-color polo sweater with particularly durable shape and color fastness. Quality: 60% cotton / 40% polyester, 280 g / m². Available sizes: XS-7XL. Available colors: navy / royal blue, black / gray, black / red, black / orange and black / lime.
Low shoe in waterresistant pull-up leather, with a synthetic antiperforation sole and carbon 200J toecap. Fitted with a textile 3D-l ining . Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Ergonomic safety knife Secunorm 500 in Aluminium, with automatic blade retraction suitable for right-handed and left-handed use and equipped with a 50mm long trapezium blade. Cutting depth: 17mm. Can be used to open bags and for light cutting operations such as cutting paper webs. The blade is very flexible so the risk of depleting is very low. The blade is connected to a spring and pulls back automatically into the container. No PPE. Blades: 1023415.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The nitrile coating in the palm provides excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 5-11. Complies with: EN388:2016 4.X.4.3.C, EN407: X.1.X.X.X.X
High shoe in high quality waterresistant full grain leather with a Air Toe aluminium toecap and non metalic antiperforation outsole Safe & Flex Zero+. Outsole in PU/PU with perfect grip and selfcleaning trace, lightweight, oilresistant and antistatic. Energy absorbing heelpart. Liner in 3D material, with moisture regulating cell structure. Removable and ergonomicaly formed insole in foam with memory effect, made from Elastopan by BASF. Sizes: 35-48.
Flame retardant, anti-static hi-vis rain jacket, 100% polyester fabric with 100% FR PU coating + AST; ± 250 g/m², 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Very comfortable, Supple, High tear resistance, Taped seams, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch & close fastening, 2 patched pockets, 2 Loops for badges, Round inset sleeves, Sleeve narrowing by press studs, Back length 85 cm (L), Fixed flame retardant cotton lining, 2 Inside pockets, Zipper in back lining for placing logos. 13034, EN 343 3.3., EN 471 3.2.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin, Full grain goatskin, Reinforced index finger and reinforced seams.
Knee pads for Tranemo work trousers with flame retardant properties. Quality: 100% EVA foam. Available colours: Gray. Complies with: EN ISO 11612 A1.
Low shoe in microfibre/textile with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
The ideal solution to mitigate static buildup when working with chemicals and liquids in environments with static hazards or high ex plosive risks. High performance Nitrile compound offers a far superior snag, puncture and abrasion protection. Reverse lozenge palm finisch for improved dry and wet grip. Foldable cuff gutter to prevent dripping on the forearm. Antistatic flocking layer for ease of donning/doffing and moisture management. Without Silicone. Sizes: 7-11.
These supple and comfortable outdoor gloves are made of water repellent cowgrain leather and fitted with an efficient and elastic 5 cm cuff. Sizes: 9 / 10.
Electro gloves MUST be stored out of sunlight and must NOT be folded. Due to the dimensions (250x500x100 mm) this case can be used for Class 0 upto Class 4 gloves, even in length 41 cm. New design with transparent cover (with UV filtration), can be fixed to a wall as well as transported by hand because of the retractable handle. Comes with a 100ml Luzenac talc container. The talc is recommended to increase comfort in use of insulating rubber gloves, it also makes them easier to done and doff.No PPE.
Completely seamless gloves made of nylon with polyurethane coating on the palm. Extremely high wear comfort due to breathability, perfect fit and optimal tactility. Available in: white, grey. Sizes: 7 / 8 / 9 / 10 / 11 / 12.
Nitrile coated gloves with a tricot cuff that fits closely around the wrist. Nitrogrip Light is extremely supple to wear and provides both fine tactility and a good grip. Sizes: 8 / 9 / 10.
White classic clog in microfibre with steel toe cap. Lining and heelpatch in microfibre. Sole in PU with good antislip. Adjustable step- in surface with inherited fastening buckle. Washable. Very suitable for HACCP. Sizes: 36 - 46.
Firefighting jacket in NOMEX® STRIKE, 220g/m², SOFIGUARD treatment with PU FR membrane (145g/m²) and aramid lining (250g/m²). High separate collar, patched radio pocket, microphone loop, zip closure under flap with velcro closure, cuffs with thumbloops, 2 patched pockets with flap and hole loops, torch holder, coated KEVLAR® reinforcements on shoulders and elbows, elongated back, bottom hem finished to prevent water rising, extra internal thermal reinforcements on shoulders and arms. Available colours: navy. Available sizes: S-4XL.
Flame retardant and antistatic hi-vis softshell jacket in 100% polyester with FR PU membrane and inherent FR fleece (400g/m²). Zip closure under flap with velcro, straight collar, 2 inset side pockets, 1 chest pocket with zipper, 1 inside pocket, cuffs adjustable by velcro, 1 loop for ID badge, detachable sleeves, length back: 75cm, stitched seams. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
High shoe Run in water repellent split suede with Geox side transpiration system (Net Breathing System). Equipped with an aluminium 200J toecap and a synthetic anti-perforation sole. Inside lining in breathable nylon and breathable insole. Sole in PU/PU. Sizes: 35-48.
Cut resistant glove for medium weight applications requiring high level of performance in dry or slightly oily environments. 13 Gauge seamless knit liner of HPPE, Fiber glass, nylon, nylon, plyester, spandex with foamnitrile coating. The coating has an excellent abrasion resistance, and good level grip in dry and slightly oily environments. Sizes: 6-11.
• crew neck sweater; • ribbed collar, cuffs and bottom hem. Quality: 100% cotton, 280 g/m². Available sizes: XS-4XL. Colors available: Navy, Gray and Black.
Chemical glove for precision and medium-heavy work. Immersed in a two-layer liquid-tight Nitrile using our XLNT technology. 35 cm long safety cuff. 18gg liner for high fingertip sensitivity in difficult environments. Type A chemical protection. Food approved and Oeko-tex certified. EN388:2016 4X43C EN407: X1XXXX EN374-1:2016: AJKLMNOT
Low shoe in microfiber/polyester (made from recycled PET bottles) with synthetic anti-perforation sole with a composite protective toe cap. Equipped with a bamboo and recycled polyester lining that is resistant to abrasion. Sole in PU/PU. Antibacterial Memory Foam sockliner. Sizes: 35-50 Conforms to: EN ISO 20345:2022 S3S CI FO SR.
High shoe Till ESD in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/Rubber, resistant to fats and oils. Fitted with a scuffcap. Sizes: 36-48.
ABE2K1HGP filter for motor unit TR-600 and TR-800. Protects against organic and inorganic gases, sulphur dioxide, ammonia, mercury vapour and dust particles. Can be combined with filter cover TR-6500FC.
100 individually packaged silicone-free cleaning wipes in dispenser. Suitable for all lenses. No PPE.
Low shoe in waterresistant black full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRA antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
