BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Safety helmet with integrated face shield (class 1) made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated face shield (class 1) made of ABS with arc flash earflap and grey reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Storage bag for V-Gard 900.
Thigh protection for riot police forces.
Full face mask for use with Cleanspace ultra and Cleanspace EX. The face mask is positive pressure with a silicone outer visor seal and silicone ori-nasal inner mask for superior respiratory protection. Easily to (dis)connect. In line with EN12942
Welding bumpcap from the 9100 MP Lite series in durable, lightweight material. Delivered with Adflo PAPR but without cassette.
Waste water tank 1000L.
Low shoe in waterrepellant leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in mesh. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Low shoe made out of waterrepellant leather. Special antislip outsole made out of rubber. Removable cushioned insole. Sizes: 35-42.
1/2 day on-site training fall protection by 3M. Content and location according to your needs.
Safety spectacle with grey lenses. Leightweight (23gr). With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values: 1,6 - 3,2ppm.
Visor carriers allow use of faceshields with helmets. Clips into universal slot ear defender housing for the Evolution® range.
Women's jeans with hidden zipper, 2 wide side pockets, 2 large back pockets, 1 with flap, loose ruler pocket with mobile phone pocket, large hanging hip pocket with flap and extra tool pockets, triple stitched seams on vulnerable places for extra long life, pre-formed trouser legs for very good fit, wide belt loops, adjustable hammer loop push button, highly breathable stretch fabric (polyamide / Lycra) in the back of the knee for optimal wearing comfort, 1 D-ring for badge holder, reflective piping. Quality: 66% / 30% / 3% / 1% recycled cotton / cotton / polyester / Lycra, 407 gr / m2. Available sizes: Width 30-38. Available colors: Marine.
Hi-vis T-shirt with round neck, reinforced ribbed collar and functional material that transports moisture away from the body. The T-shirt is also quick drying, shrink and wrinkle free. Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow. In accordance with: EN ISO 20471 class 3 (class 2 for sizes XS-M).
Fluo rain trousers RWS, 50% polyester, 50% polyurethane, 190 gr / m² Microflex. Elastic at the waist, 2 side pockets, high frequency welded seams, adjustable press-stud fastening underneath pipe, RWS reflection, wind- and waterproof. Available sizes: XS-5XL. Available colors: Fluo yellow and fluo orange. Complies with: EN ISO 20471 class 3 and EN 343 3: 1.
Sweater RWS, 80% polyester / 20% cotton, 260 gr / m2, fluor orange, stitched striping, execution in accordance with guidelines Rijks waterstaat, eyelets under the armpit for extra ventilation, elastic waistband at the bottom, roughened inside for extra comfort Available sizes: XS-7XL. Available colors: Fluo yellow and fluo orange. Complies with: EN 20471 class 2.
The 3M™ Peltor™ LiteCom Pro III earmuff is a high-performance hearing protector with a built-in communication radio for cable free short-range communication with other LiteCom headsets and portable two-way radios programmed on the same frequency. Bluetooth® Multipoint connectivity for connecting mobile devices The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. SNR: 33dB. Possibility of programming your own frequencies (not included in the price). In accordance with: EN 352-6
Heavy duty welding helmet G5-01 without welding filter and neck or head protection, with replacement shell. Designed for heavy welding and grinding and can be connected to the Adflo powered protection for a TH3 class respiratory protection (NPF500). Cassette (available separately). Conforms to: EN379/ EN175.
Adaptor to connect the old davit arm with the new fixed base No PPE.
This jacket is equipped with knitted wind cuffs in the sleeves, two pockets on the inside and two pockets on the outside. The sleeves are removable and this jacket can be fitted with a hood. The breathable, water-repellent outer fabric and moisture-absorbing coating on the inside protect you from wet weather conditions. Available colors: Hi-Vis yellow/Navy and hi-vis orange/navy. Available sizes: S – 4XL.
BESTO 300N Automatic/Harness Wipe Clean Yellow: - Automatic with Harness - UML Pro Sensor - Crotch Strap - Wipe Clean Yellow - Nylon collar - Reflective panels on both sides - Mesh Bag
High shoe with brown water resistant microfiber upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in Artico 3D: antibacterial. Outsole in PU/TPU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
SIP Protection BasePro chainsaw jacket. The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work: Short and straight collar; Zip closure; 2 inset pockets with zip closure; Sleeve narrowing by press studs; Back ventilation; Elongated back tail. Quality: 65% Polyester - 35% cotton outer fabric ± 210 g/m². Available sizes: S-4XL. Available colours: Fluo yellow/black and fluo orange/black.
Flame retardant polo shirt with short sleeves, polo collar with buttons, elastic cuffs and chest pocket. Available sizes: XS-4XL. Available colors: navy. Compliant with: EN ISO 11612 A1B1C1F1, IEC 61482-1-2 Class 1 (EBT: 7.0 cal / cm²), EN 1149-5.
Microflex flame retardant rain pants: - Elastic waist; - Welded seams; - Adjustable snap closure on the legs; - Wind and waterproof. Quality: PVC-PES / COT, 390g / m². Available sizes: L-3XL. Available colors: Royal blue. Compliant with: EN 343 class 3: 1, EN ISO 14116, EN 1149-5, EN 13034 and IEC 61482-2 class 1 (21.1 cal / cm²).
Hi-vis polo Belenos 12701: - collar with 3 buttons; - short sleeves with rib; - segmented reflection on the front, back, shoulders and sleeves. Quality: Cotton / PES 60% / 40%, 180g / m². available sizes: XS-3XL. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 class 2/3.
Work trousers with concealed zip, 2 inset side pockets, 2 back pockets with flap, ruler pocket with flap, thigh pocket with flap, knee pockets, extra insert at crotch to prevent tearing out, reflective tape. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin weave + DWR, 280 gr / m2. Available sizes: 44-66, lengths 14-57 and belly sizes 24-29. Available colors: Black / gray, cornflower blue / navy, gray / red and gray / blue. Conform: EN ISO 11611 class 1, EN ISO 11612 A1A2B1C1E2F1 and IEC 61482-2 class 2.
Salvequick Fngertip plasters are high quality flexible plasters. The patches are allergy tested. They are easy to apply, flexible and easy to use. Pack of 6 refills. Each refill contains 15 plasters (87 x 56 (23) mm).
Seamless knitted polyamide/elastane grey glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 25 seconds). Suitable for handling, and precisionwork in dry and oily conditions. Sizes: 7-11.
The 3M ™ Versaflo ™ BT-64 Breathing Hose is a heavier and more robust breathing hose with a fixed length to use for heavy work. This BT-64 Breathing Tube connects approved 3M close-fitting facepieces to 3M motor-powered systems to ensure clean air reaches the facepieces with unrestricted airflow. The breathing tube is supplied with the 3M ™ TR-973 Air Flow Indicator. The BT-953 cleaning and storage kit can be ordered separately. For use with 6000 and 7907S series full face masks, and 7500 series half masks in combination with the Versaflo TR-600 and TR-800.
This multinorm work jacket has a regular fit and an ergonomic fit with a pleasant wearing comfort. The multifunctional pockets provide plenty of storage options. Quality: 74% Cotton / 25% Polyester / 1% Carbon, 320 g / m². Available colors: Marine / fluo yellow. Available sizes: XS-5XL. Conforms to: EN 1149-5: 2018, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, EN ISO 20471: 2013 Class 2, IEC 61482-2: 2009.
The Mulitnorm Bicolor Work Pants protect against various residual risks from the work environment. Quality: 74% Cotton / 25% Polyester / 1% Carbon, 320 g / m² Available colors: Fluo yellow / navy. Available sizes: Size range 42-66 NL. Conforms to: EN 1149-5: 2008, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, EN ISO 20471: 2013 Class 1, IEC 61482: 2009.
Welding curtain in self-extinguishing matte green PVC in Robusto single frame, for indoor use. Frame with 4 swivel castors, 2 of which have brakes. Height: 180 cm, width: 220 cm, curtain thickness: 0.4 mm. In accordance with EN15998.
Filling suitable for small BHV drum base (item 1050699) and deluxe (item 1050700).
Inherently flame retardant sweater with arc flash protection. Quality: Modaflame Knit: 60% Modacrylic, 39% Cotton, 1% Carbon Fiber, 300g. Available sizes: S-5XL. Available colors: Navy. Conforms to: EN ISO 11612 A1, B1, C1, F1, EN 1149 -5 and IEC 61482-2 IEC 61482-1-2 class 1 (ATPV 16 cal / cm²).
Overboot in ultra chemical resistant and antistatic material (Hazmax). Outsole in yellow Hazmax compound, with a perfect slip resistance and oilresistant. Forseen with a heel part, excellent for climbing ladders. Fixing by two buttons for a perfect fit, wide shaft for ease entry and fitting.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing.Sizes: 8-11. Thickness: 1,5mm, Lenght: 360mm Certified for resistance to acid (Category A), Ozone (Category Z) and very low temperatures (Category C).
Hi-vis fleece jacket Senic: upright collar; Zipper with chin guard; 1 inset chest pocket with zip; 2 inset zip pockets; round sleeves; Elastic in sleeve end; Long zipper loop for extra easy opening. Quality: 100% polyester double-sided fleece; ± 285 gsm. Available sizes: XS-3XL. Available colours: Fluo yellow/navy and fluorescent orange/navy. Complies with: EN ISO 20471 : 2013 +A1 2016 / Class 3 and EN 14058 : 2017 / Class 1 1.
Durable un-lined glove in synthetic leather with great dexterity and a good grip. The pre-shaped fit makes the glove comfortable and flexible, an elastic at wrist and a half-length cuff to ensure that the glove stays firmly in place. Sizes: 6-13.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 21 inches. Material: Rubber.
Low shoe in microfiber and textile, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile and microfiber. Outsole in PU/TPU, SRC antislip, oil and carburant resistant, excellent electricity discharge. Removable, polyurethane insole with textile layer. Sizes: 38-47.
Backpack 941.29: 100% polyester (recycled, 600D); Padded adjustable shoulder straps; main compartment with zipper; Zippered front pocket; Drawstring zip pullers with reflective details; tear-off label; Capacity: 18 litres. Dimensions: 31 x 42 x 21 cm.
The polo sweater with collar is ideal for work in an outdoor environment, because the mix of combed cotton and polyester keeps the w earer warm. The sweater has a neck tape, a 3 button fastening and an elastic hem at the bottom. Quality: 60% cotton / 40% polyester, American fleece, 280 g / m². Available sizes: XS-7XL Available colors: Red, wine, gray anthracite, gray melange, navy, royal blue, bottle green, black, white, lime and dark gray.
Working in extremely cold conditions? With the Cottier hood, you are neatly tucked in. This freezer hood with high-tech insulating thermal lining protects you against temperatures down to -40 °C. In addition, your ears are well hidden by the extra insulation.
Semi-automatic safety knife for right-handed and left-handed use Stainles Steel blade and handle without paint. Metal detectable, for use in food and pharma industry. Handy Format no tools needed to replace the blade
Two-tone lady polo piqué with three-button placket and contrasting tipping on the collar. Contrasting ribbon at the neck and side slits. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Oeko-Tex* 100 certified. Quality: 50% organic cotton, 50% recycled polyester, 200 g/m². Available sizes: XS-2XL. Available colors: Blue/Navy, Navy/Blue, Black/Red, Black/Orange, Black/Grey and Gray/Black.
The 100% cotton glass workers jacket offers maximum comfort and has an AFLAMMIT® flame retardant treatment. Composition: 100% flame retardant cotton 490g/m². Available sizes: M-2XL. Available colours: Green. Complies with: EN ISO 11612 A / B2 C2 D2 E2 F2.
Protective visor for Kask helmets Zenith. Easy to install. Sratch- and fog-resistant.
The Basic Outerwear Silver Ion treatment fights odors and improves the lifespan. The outerwear fits well for optimal moisture removal and is suitable to wear during all seasons. Quality: 93% Moisture Wicking Polyester,7% Elastane Silver, 165g/m². Available sizes: S-2XL. Available colours: Black.
P filter for motor unit Versaflo. Protects against highly toxic dust ,mist and smoke particles. Saturation of the filter is only detectable by an increase in (inhaling) resistance, the motor unit will alarm.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with RPB PX5 motor unit or on compressed air line. For medium to heavy applications. Respiration, face and head protection in one. Includes: air hose, and FR face seal and FR shoulder cape.
PALLET WITH SUBMERSIBLE PUMP OPENING
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. .
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. No PPE.
Lanyard, 2 meter length, consisting of elastic strap with integrated shock absorber. Fitted with one aluminium standard carabiner and one aluminium with big opening (60mm) and a fall indicator. Capacity up to 140Kg. Serves as connection between anchor point and harness. Suitable for use with sharp edges.
Super-light safety helmet for working at height, with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (53-63 cm) with MIPS and sweatband. The Nexus Extreme Mips combines a low friction layer that allows the head to move inside the helmet (10mm – 15mm relative motion in all directions) which can redirect the harmful rotational motion otherwise transferred to the head. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is required. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Scratch resistant, tempered mineral glass for protection against welding spatter. Dimensions: 90X110mm.
Cap B010 with adjustable size for a perfect fit. Quality: 65% PES, 35% Cotton 190g/m².
Flame retardant ladies T-Shirt with round neck and long sleeves. Extended back. Quality: Merino RX, 200 gsm. Available colours: Black/grey. Available sizes: S-2XL. Complies with: EN ISO 11612: A1+A2 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5, TRANEMO SKINSAFE, ARC RATING: 5.5 cal/cm².
Nova 3 hood, includes: NV3-750 nylon cape, NV2030 low flow indicator, NV2021B breathing tube, C40 constant flow air supply system with mail coupling CEJN 342, air conditioning unit
Low shoe in velours microfiber. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
Safety glasses with CSP polycarbonat lenses and orange/black frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes. Not supplied with glasses cord (can be ordered separately: 1034594).
Belt in black leather. Adjustable to max 115cm.
Face shield in clear polycarbonate, length 185 mm. For use on EVO safety helmets. Marking: 1 AT 3 9 KN.
Low shoe in Safety Knit® textile. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. With Disc closing system. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. BreathActive lining. Outsole in Impulse Foam/rubber, resistant to 300°C. Removable, polyurethane insole with textile layer. Sizes: 36-47.
