BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Low shoe in black full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Compress, suitable for dressing a leg or arm wound. Dimensions: 7X10CM.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar. Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Model on base. Can be ordered with 3-way output 1002713 and 1014794 couplers. For use with compressed air hoses with maximum lenght of 10m.
Mandatory sign - Ear defenders mandatory in self-adhesive polyester. Dimensions diameter: 50mm. Not PPE.
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Antistatic, silicone-free and DMF-free.
Baxter safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below. Elastic headband included. Brown polycarbonate lens with anti- scratch and anti-fog coating.
Inexpensive full body harness with 2 D-ring and pas through buckles. Only shoulder and chest straps are adjustable. Test Weight: 140kg. Universal size.
Kit to activate IntelliDox. Includes power supply with region-specific AC power cord, ethernet cable, inlet (purge) filter assembly,3 ft. / 1 m calibration gas tubing, 3 ft. / 1 m purge gas tubing, 15 ft. / 4.5 m exhaust tubing, quick connect fittings.
Solvent-free hand cleanser for medium to heavy-duty dirts and soils. Contains skin protectant EUCORNOL®
Anti static rubber 20m hoses offering outstanding aging qualities and longservice life. Resistance to sparks and scorching.CEJN safety couplings that are quickand easy to connect yet prevent accidental disconnection. In line whith: EN14593, EN14594
Particle-filtering preformed mask with exhalation valve – ergonomically adapted for smaller faces. Four-point headband attachment and flexible, adjustable nose clip for a comfortable, secure fit. Very soft, all-around sealing lip for optimal wearer comfort and secure fit. Exhalation valve to further reduce breathing resistance, by helping to minimise moisture build up inside the mask. Version : FFP3 NR D preformed mask with valve .EN 149 89/686/EEC.
Semi-orthopedic inlay sole for women. Excellent schock absorption. Suitable for products of the NOVA productgroup. Sizes: 35-42.
Lightweight safety glasses in polycarbonate with Pressure Difffusion Temple technology for perfect and secure fit. This glasses have very good colour recognition, Scotchgard anti-fog coating, a large field of view and brings resistance to UV-rays.
Half face mask designed to work to complete the Claenspace PAPR systems. Compatible with all Cleanspace Respirators. Clips quickly onto the power units and are easily unclipped for cleaning. Made of soft silicone that readily moulds to the face and doesn't cause allergic dermatitis.
Prefilter for standard P3 filters, for cleanspace motorunits. Set of 10 pieces.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Low shoe made out of waterrepellant leather. Special antislip outsole made out of rubber. Removable cushioned insole. Sizes: 35-42.
Floorstand 'Slippery floor'.
Safety glasses with a black frame with orange accents. Soft nose bridge and temples. Polycarbonate lenses for UV protection with a anti-fog coating (HydroShield).
A Tubular neck-fit product made of Thermolite® fabric with anti-cut fibres. The technical combination of anti-cut and Thermolite® materials offers protection with a high level of comfort with built in elasticity. Ideal for wearing year round, offering protection against cold and variable weather - especially suited to moderate cold weather. Tested to the requirements of Blade Cutting Resistance with protection against physical aggressions and cuttings. Available colors: Navy.
Full face mask G1 with Maxx connection and F1 helmet adadpters, and visor anti-scratch treated, successor to Ultra Elite mask, light, compact with wide field of vision. Improved air flow in the mask. Sizes: small, medium and large. Fully serviceable with voice membrane.
Floor mount base high capacity in galvanised steel. Fixed base for high capacity davit arm. Horizontal structure on concrete or metal. When used with davit arm, in line with: EN795 type A, EN1496 Class B.
Schort gemaakt uit polyester / katoen met twee handzakken aan de voorzijde. Deze schort is beschikbaar in maten S-XXL in marine het, grijs nimbus in roze. From Camille schort heeft een standaardlengte van 80 cm.
Flame retardant Hi-Vis softshell jacket, very comfortable. Non-metal, wind and water-repellent and with a high arc standard. Ergonomically shaped to work with arms raised. With comfortable heat seal reflection. Concealed zipper front and double storm flap with press buttons. Left breast pocket with flap. Right chest pocket with zipper and loop for telephone cord. Headset holder in the collar. Side pockets with zipper. Left sleeve pocket with flap, concealed key ring and loop for ID pocket. Cuffs on the inside of the sleeves. Tunnel cord bottom of jacket. Quality: Windtech FR 340, 340 g / m², wind and water repellent. Available sizes: XS-4XL. Available colors: Fluo yellow / navy. Compliant with: EN ISO 11612: A1 B1 C1 F1, IEC 61482-2: APC 2, EN 1149-5, EN ISO 11611: CL.2 A1, EN 13034: TYPE PB [6], EN ISO 20471: CL.2 * (XS-S) CL.3 (M-4XL).
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Flame retardant polo shirt with short sleeves, polo collar with buttons, elastic cuffs and chest pocket. Available sizes: XS-4XL. Available colors: navy. Compliant with: EN ISO 11612 A1B1C1F1, IEC 61482-1-2 Class 1 (EBT: 7.0 cal / cm²), EN 1149-5.
High shoe in waterresistant full grain leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a br eathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/E-TPU Infinergy® extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 38-48.
Signaling straps in 100% polyester with PU finish against the rubbish and PU coating. Adjustable hook-and-loop closure, waistband and shoulders are 7.5 wide. Reflective strips with width of 3cm. Available size: Universal. Available colors: yellow fluo and fluo orange.
Leather case for Twig One with transparent front and simple to use swivel belt clip mechanism to use either in vertical or in horizontal position.
Coverall with hood, elastic face opening and chin flap for a tight fit around the breathing mask, stitched and taped seams, double adhesive zip, double zip and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle-tight fabric, excellent barrier against a wide range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Anti-static treatment (inside). Includes non-dissipative gloves and dissipative socks. Available sizes: S-3XL. Available colors: gray. In accordance with: EN 1073-2: 2002, EN14605: 2005 + A1: 2009 (Type 3/4), EN ISO 13982-1: 2004 + A1: 2010 (Type 5), EN 13034: 2005 + A1: 2009 ( type 6), EN14126: 2003 and EN 1149-5: 2008.
The ShoveIt® no touch hand safety tool helps avoid hand injuries while working with suspended loads or maneuvering objects, maintaining proper body positioning for safe handling out of the line of fire. It enables users to guide loads, move and position pipes and tubulars, as well as grab slings and taglines without physically placing hands on the item. Length: 72 inches. Material: Rubber.
Cut resistant, seemles knitted nylon-spandex-basalt fibre thread, CFR technology,stainless steel fibre yarn gloves (13 gauge) with insulating layer nitrile foam/aqua PU in the palm with reinforcement between thumb and index. approved for food handling, touch screen compatible, . Heat resistant up to 100°C contact heat. DMF free. Designed for heavy work.Sizes: 6-11.
Hi vis softshell in a breathable and waterproof fabric with PU membrane. 2 side pockets, 1 chest pocket, 1 inside pocket and 1 sleeve pocket. Pulling cord, adjustable cuffs and fixed hood. Available sizes: XS-7XL. Available colours: hi vis yellow/navy, hi vis orange/navy, hi vis orange/green.
Water-and windproof rain jacket with PU coating. 2 slant pockets, 1 chest pocket, 1 sleeve pocket and inside pocket with zip fastening. Zip fastening with stormflap, elongated back and removable lining. Available sizes: XS-7XL. Available colours: hi vis yellow/navy, hi vis orange/navy, hi vis orange/green.
Replacement front cover for the flip-up part of the 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01.
- Skin conditioning cream - Non greasy, light formula - Shea butter, alantoin and glycerin for hydratation and care - Perfum free and dye free - Glove compatible - Silicone free - Non-tainting and HACCP assesed formula
Flame Retardant Coverall bizflame FR51: Protects against radiant, convection and contact heat; Class 2 welding protection; Back pleat for more freedom of movement; Adjustable hem for all leg lengths; adjustable cuffs; UPF 40+ fabric blocks 98% of UV radiation radio loops; 10 storage bags; knee pockets; Concealed zipper. Quality: Bizflame Plus: 99% cotton, 1% carbon fiber 350g/m². Available colors: Navy and Orange. Available sizes: XS-2XL. Complies with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 2 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-1 Elim 8.6 cal/cm² and IEC 61482- 2 IEC 61482-1-2 APC 1 (12 ATPV 13.6 cal cm²).
Gel sealing rings compatible with most 3M PELTOR Headsets, featuring a super-thin polyurethane skin with a double-hump top face design and a silicon gel-filled bladder with a Confor foam backing. Not tested separately as PPE.
Cederroth compresses for very fast, first treatment of burns, 10 x 10 cm.
Gas filter A2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C. To use with half and full face Sundstrom masks.
Signa waistcoat in 100% polyester (120g/m²). Without reflective bands. Available sizes: S/M and L/XL. Available colours: royal blue, red, lime, white, fluo yellow and fluo orange.
Cederroth soft foam dressing blue 2m works both as plaster and bandage and is suitable for small wounds. Easy to apply to fingers, hands, arms, toes, feet and legs etc. Suitable for all types of small wounds in hot, cold, wet or dry conditions and holds well in water.
TYVEK® IsoClean® sleeve option 00 (Bulk Packed) Bound seams. Covered elastic at both ends. 45 cm long. White. Available sizes: one size For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.
Hairnet dispenser, stainless steel (30 x 16 x 31.2 cm) This dispenser is ideal for storing hair nets and is made of stainless steel. The dimensions of the dispenser are 30 x 16 x 31.2 cm (l x w x h). Available color: silver
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. The unit consists of a regulator, pre-collector and main filter (SR 292), all of which are mounted in an enclosing steel sheet stand. The unit can be placed on the floor or mounted on a wall. The pre-separator has automatic drainage, separates coarser particles, water and oil. The SR 292 main filter consists of a carbon filter part (500g) , surrounded by two P3 particulate filters. The air is cleaned to remove any remaining particles/gases/vapours/odours. A Y coupling that increases the number of outlets is available as accessory. A maximum of 3 people can be connected.
Fall arrest device 'double sharp edge' designed for use on aerial work platform. The dynamic force exerted on an EN28 anchor point in the event of a fall is less than 3 kN. Maximum user weight: 140 kg.
The W6R Work is a powerful, flexible and premium work lamp. This rechargeable work lamp has a light output of 500 lumens and has two light sources: a chip-on-board LED for wide illumination and a spotlight with a focused beam. The lamp can be folded out 180° and has a rotation of 270° for optimal flexibility. In addition, the W6R Work has a built-in magnet and the plastic housing provides sufficient grip. Furthermore, it works on a replaceable Li-ion battery (3.7V, 2500 mAh) that you can easily charge via USB-C. Finally, the W6R Work is splash-proof (IP54) and equipped with "Transport lock" so that you cannot accidentally switch it on. What do you get? The Ledlenser W6R Work, 1x Li-ion battery, a USB-C charging cable and no less than 7 years warranty after online re gistration.
Flame retardant shell jacket for women in a waterproof, windproof and breathable material. Comfortable all-season multi-standard jacket with inherent flame protection. Conforms: EN 61482-1-2 APC 2, EN 61482-1-1 ELIM: 27 cal/cm², EN ISO 11612 A1 A2 B1 C1 F1, EN ISO 11611 A1 A2 class 1, EN 1149-5, EN 13034 Type PB [6], EN ISO 20471 class 2 in sizes XS-S and class 3 in sizes M-4XL and EN 343 class 3/4.
Sign according GHS normation in self adhesive polyester: acute toxicity. Size: 40x40mm. 20 labels per card. No PPE.
AED sticker (green with white) 10 X 10 CM
Safety helmet with micro peak and integrated arc visor (class 2), made of strong ABS for improved low temperature (-40°) and side impact protection. The transparent, gray face shield provides improved optical properties. With a very high VLT (Visible Light Transmission) value of 82%, colors are much more distinguishable. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
This PCM CoolOver provides a constant cooling temperature of 6.5°C. The CoolOver is specially designed to improve performance and speed up recovery after exertion.
Fall arrest block in a 3.5m strap, sharp-edged, tested, with external shock absorber. Suitable for vertical and horizontal use and for a maximum user weight of 140kg.
Super-light safety helmet with short peak, made of strong polypropylene. With 4-point textile suspension (51-63cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Descent/evacuation kit Rollgliss with 9.5 mm core rope with reduction 3:1 that makes retrieval and descent lighter. Total rope length should be divided by 3 to know the usable rope length. To be hung from the eyes of Rollgliss or other anchoring points. Can only be used with the supplied line clamp Jumar which must be operated by a second person, not for self-descent. Hoisting a person with the R350 is only permitted in combination with the AM100 tripod. Transport bag included. Max descent capacity: 250kg, max raising capacity: 150kg.
The SST1 single gas detector provides up to two years of maintenance-free operation and is available in H2S, SO2, CO, or O2 models. Its simple design makes it perfect for users looking for ultimate protection while being easy to use, durable, and cost-effective. low alarm: 2ppm, high alarm 4ppm.
Industrial Air hood with safety helmet SR 575 to be combined with motor unit SR 500/ SR 500 EX or SR 700, and with SR 507 for use with compressed air.Transparent visor in PC. Air channel leads to the visor to avoid fogging of the visor. Lightweight construction with low centre of gravity ensures a balanced and ergonomic fit. Adjustable head harness ensures secure and personalised fit.A wide range of accessories makes the helmet suitable for different applications.
To be mounted on the helmet to connect a visor to the helmet.
CST half mask (including a CleanSpace CST head harness) is designed for use with the CleanSpace PRO Power Unit (CST1002) and CleanSpace ULTRA Power Unit (CST 1012).Made of soft silicone that moulds easily to the face and does not cause allergic dermatitis. Easy to attach to the power unit, the head harness easily attaches to the connection points and can be removed for cleaning.
