BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Trousers, aluminized carbon/para-aramide, 540 gr./m², lining in cottonProban, fly-closure with press-studs, 2 side slits under flap, seams stitched with Kevlar ®. Sizes: M - XXL.
Frost-free emergency shower and eyewash fountain, with stainless steel pull handle and UV resistant ABS coating. Works to -50 °C wit h a self-regulating heating cable.
Gaiters, aluminized para-amide, 500gr./m², Velcro closure, no lining,strap under sole, long-term use. Dimensions: length 36cm.
Mini-Cable Locking System in Mini Cable Locking System. Locks both hand wheel taps and interrupters. Not PPE.
High shoe in nubuck leather and Techno leather (long-lasting), with a steel anti-perforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant Vent-Air liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Adsorbs all industrial liquids including oils, water, solvents and coolants. GP roles have a better and less fluffy finish compared to traditional one-layer melt spinning reels. Role Dimensions: 96 x 44m. Recording capacity: 192 liters. Package: 1 roll / bag. Ideal for covering larger areas. No PPE.
Extremely flexible glove in non-hardened vulcanised rubber. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Due to its durability, insulating quality and good finger sensitivity, this glove is ideal for any environment where protection against electrocution is necessary. Length 41 cm.
High shoe in full grain leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Laces are heat resistant. Has BIOMEX-PROTECTION- support for stabilizing the ankle. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
Bandage scissors for cutting bandages or tape Material: stainless steel. Matt Silver - can be sterilised. Dimensions: 14 cm
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 0.8m. Anchor point for protection of one person.
Skin tone: with pad made of viscose wadding, covered with thin polyethylene film which allows moisture to escape but does not stick to the wound. The plasters are perforated, individually wrapped. To cover and protect small superficial wounds. Pack containing 40 items.
Anti-static absorbent pads measuring 38 cm x 48 cm. These medium-weight perforated pads are packaged in a box. Packaged per 100 pieces. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these wipes as chemical waste. Absorption capacity: 81 litres.
Inexpensive full body harness with 2 D-ring and pas through buckles. Only shoulder and chest straps are adjustable. Test Weight: 140kg. Universal size.
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
Lightweight parka in 100% polyester with PU coating (160g/m²). Zip closure with stormflap on the inside, padded lining, removable hood, reflective piping, 4 exteriour pockets with waterproof zippers, 2 interiour pockets for cellphone, mp3,... and an id-badge, adjustable cuffs by velcro and windbreaker. Available sizes: XXS-7XL. Available colours: navy, black, dark grey.
Lens cleaner spray B412 with aqua formula, Alcohol and Silicone free. Suitable for all types of lenses. Anti-bacteria, anti-static and anti-reflective. 250ml.
Semi-orthopedic inlay sole for women. Excellent schock absorption. Suitable for products of the NOVA productgroup. Sizes: 35-42.
The uvex pheos alpine combines the various requirements of the industrial sector (in accordance with EN 397) and mountain climbing (in accordance with EN 12492) in one helmet with an unparalleled fit . Multifunctional helmet for working at heights and rescue operations. Combination of features from the industrial protection helmet (EN 397) with the requirements for a climbing helmet (EN 12492) .Safety helmet with slot on the front for helmet lights.Side Euroslot adapters (30 mm) for attaching earmuffs or the uvex pheos visor system . Options for attaching head torches, goggles and face protection . Meets standard EN 397 and additional requirement for very low temperatures (-30 °C) . Firmly riveted four-point chin strap for use in accordance with EN 12492. Chin strap included (art. no. 9790.005) for use in accordance with EN 397. Light ABS helmet shell offers high level of protection and durability. Comfort features : Six-point textile band attachment ensures optimal fit and great comfort.Suspension harness with wheel ratchet for variable width adjustment.
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with 2 Skalt Comita aluminium hooks with 20 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
Detectable beard mask in polypropylene with metal strip. Perfect for use in food or agro industry. Available colour: blue.
Super lightweight sportive spectacles (23g) in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. Flexible frame with soft temples (XCT). With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Overall Industry flame-retardant treated cotton: - Concealed button closure at centre front - Single layer chest pockets with safety fl ap and button closure - Slanted side pockets - Side vents with safety fl ap and button closure, behind side pockets - Kneepad pockets - Adjustable waistband for improved ergonomics and ultimate comfort - Single layer back pocket with safety fl ap and button closure on RHS - Single layer tool pocket on RHS leg Quality: 60% cotton / 39% polyester / 1% AST, 360 g / m². Available sizes: 48-66. Available colors: Navy. Complies with: EN 1149-5, EN ISO 14116, EN ISO 11611 class 1, and ISO 11612 A1B1C1E1F1.
Salvequick Textile Finger Bandage are extra long textile plasters, soft and flexible. Easy to wind around a finger and for more hard-to-reach places. Dimensions: 120 x 20 mm.
The SR 100 half mask is made of silicone in three sizes, i.e. S/M, M/L and L/XL. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist. The material and pigment of the mask body are approved by FDA and BGA for foods, which minimizes the risk of contact allergies. The easily adjustable elastic head harness straps of the mask are designed as a V-shaped loop and have a large dished crown plate, which contributes towards a comfortable and safe fit. The mask is used either as a filtering device in combination with filters from the Sundström range, or in combination with the SR 307 compressed air attachment which then serves as a breathing apparatus with continuous flow for connection to a compressed air supply. A pre-filter holder is supplied. Best stored in box SR 230 or storage case SR 339. Sizes: S/M, M/L, L/XL.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
4-points chinstrap for Pheos helmet. No PPE.
Comfortable half mask in TPE with integrated and replaceable particle filters. for anti-odour protection against nuisance odour, dust, all types of fumes, oil and water mists and micro-organismes. Light weight, silicone and latex free. Sizes: S/M and M/L.
Comfortable half mask in TPE with replaceable ABE1P3filters. For protection against most organic and arorganic gases and vapours, sulphur dioxide, acidic gases and vapours, toxic dust, vapour and smoke particles metal fumes, mists and micro-organisms. Sizes: S/M and M/L.
P3 RD with actif carbon Elipse replacement filter for usage on Elipse Integra odour masks. Pack of 10 paires..
Forestry Pants 1SNA: zip fly; 2 inset zip pockets; 1 patch thigh pocket with flap; 1 patch smartphone pocket on the right leg with waterproof zipper; Ventilation zipper on the back leg; Elasticated waist with belt loops and loops for suspenders with velcro (ref. 5SD4); 3-needle stitching at the back. Available sizes: XS-2XL. Colors available: Grey/Black, Red/Black and Khakhi/Black. Complies with: EN 381-5 : 1995 Design A, Class 1, AS/NZS 4453.3:1997 Type 1 and ASNZS4453.3 Type 1.
Gloves designed for work in cold working conditions. The combination acrylic/spandex in the seamless liner (13 gauge) combines a light weight with warmth and suppleness. The double latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: 7(S)-11(XXL).
Ladies jaacket Oyora with arc protection: Straight collar Closure with hidden press studs under flap 2 patched chest pockets with flap closed by concealed press studs 2 patched slanted pockets with flap closed by concealed press studs 2 loops for gas detectors Round sleeves Sleeve narrowing by press studs Extended back Double stiched (2x2) flame retardant reflective striping (50mm). Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g/m²Available colors: Navy. Available sizes: 36-56.
Isotec S5 safety boot in ultra chemical resistant and flame resistant material with steel toecap and steel antiperforation sole. Removable, washable insole. Vulcanised rubber sole, oil resistant, non-slip and heat resistant up to 300°C (contact heat). With shock absorbent tunnel system in the heel. Colour: green. Available: 35-50.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a 3/4 liquid-tight coating. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Welding cap with elastic back. Quality: Cantex 1210, 350 g/m².
• Long-sleeved T-shirt in single jersey • yellow (10) and orange (17) in polyester • modern, slim fit • double-layered collar • ribbed collar and cuffs • no side seams Available sizes: XS-4XL.
Safety helmet made out of ABS with integrated visor. Has a 6-point textile cradle (53-64cm). Available in: white.
Low shoe in Safety Knit® Green textile, made out of recycled PET-bottles and polyester fibres. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. Breathable, functional lining. Outsole in EVA/Nitrile, resistant to 300°C. Removable, polyurethane insole with textile layer. Sizes: 36-47.
Very fine and cut resistant glove (43.9N) designed for fine work with high cut risks. Can be washed up to 5 times at 40°C without loss of efficiency.
The HSYA is a fully automatic AED that can be supplied in one language or in a combination of multiple languages ​​(maximum 4).
Spark Plug Soft earplug, extra soft and with good noise reduction. Available in a disposable box containing 200 pairs, each pair in a separate bag.
High visibility disposable coverall in TYVEK® (type 5/6). Coverall with collar, reflective striping on the shoulders, chest, arms and legs. Elasticated waist, ancles and cuffs, zip closure. Available sizes: S- 3XL. Available colour: hi-vis orange.
The first automatic welding mask with a curved auto-darkening filter - especially for TIG welding! Previously, automatic darkening filters were always flat. If you wanted a larger field of vision, you needed a larger helmet with plenty of room for it. Because the curved cassette is around the face, it is possible to fit a large field of view (150mm x 76mm) in a very slim mask. Light level 2.5, dark levels 8-12. Equipped with natural color technology for high-contrast vision. Four arc sensors ensure that the G5-02 shifts reliably even at very low TIG settings. G5-02 can be securely connected to the smartphone via Bluetooth via the 3M Connected Equipment app.
Super-light safety helmet for working at height, with short peak, made of strong ABS for improved low temperature and side impact protection. With 4-point textile suspension (51-62 cm) and sweatband. Additional 4-point chinstrap harness, ideal for work at height when EN14052 standard is required. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Protection against cryogenic cold down to -197°C, thanks to a wool/cotton fleece lining and an ISO Air felt for protection against e xtreme cold. Protection against cryogenic gas splashes (liquid nitrogen or liquid carbon dioxide). The quality of the leather, lined with a waterproof membrane, is the same on the palm and the back of the cryogenic gloves. This model of short cryogenic glove fits snugly around the wrist thanks to an elastic cuff. Additional wrist protection is provided by a leather artery protector on the inside of the wrist. Conforms to EN388: 3222X , EN511: 231 , EN407: x3XXXX
Complete disposable set, for very short work in an environment with asbestos, without direct relation to asbestos dust and without projection of asbestos (maintenance and repairs). It consists of an overall in size XL, a pair of PVC goggles, 1 FFP3 mask, and a pair of green nitrile gloves size 10, 1 waste bag with asbestos marking (90x110cm), a pair of disposable overboots and 1 roll of tape to stick gloves and overboots and thus prevent asbestos from penetrating the suit. WARNING! IN VIEW OF THE STRENGTHENED REGULATIONS OF DECEMBER 2025 REGARDING SIMPLE PROCEDURES AND THE LOWERED ASBESTOS LIMIT, YOU MAY NEED TO USE A FULL-FACE
The thinnest glove with cut protection level F, with the new advanced CRF® omni technology with a reinforced HPPE cut protection fibre. 21 gauge, with PU coating. Reinforcement between thumb and index finger and touchscreen functionality. Conforms to: EN ISO 21420:2020 - EN 388:2016+A1:2018 2.X.4.2.F
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 295g.
Orange insulating natural rubber gloves. Their thinness and grip surface make them easy to handle. Excellent dexterity. Sensitive to touch, maximum grip in wet conditions. Working voltage of 1,000 volts, test voltage of 5,000 volts. Sizes: 7–11 Compliant with: EN60903 Class 0, AZC. Arc Flash: ASTM F2675. ATPV: 12 cal/cm².
Vibration absorbent gloves made of pigskin leather with breathable Spandex® and PVC shell for extra protection of the back of the ha nd. Provides excellent vibration and shock absorption due to patented NU202 polymer. With breathable backside, elastic collar and re inforced fingertips for longer service life. Colours: black with high-viz accents.
Comfortable duo-lens safety glasses, fit tightly against brow and cheek. Transparent grey. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Blue zig-zag folded towels made of very high-quality material. High absorption capacity and very high absorption speed. Dimensions: length 20,5 cm x width 25 cm, 2 layers. Packaging: 20 bundles of 250 towels.(= 5000 pieces per box) 00330078. applicable.
Escape hood with COP2 filter, provides protection against smoke from fire, among other things. Easy to put on, even for people who wear glasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in sealed two-part wall box. Dimensions: h x w x d 28.5 x 15.5 x 12.5. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
This transparent mask for mouth-to-mouth resuscitation allows a goodviewof the victim. Packed in a hard box.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, includes a car ry strap for hanging the mask around the neck. Features click connection for demand valve with quick-coupling Automaxx-AS.
Demo kit miniature blocking system. Not PPE.
Earplug in TPE with soft strips for an easy fit in the ear canal. Equipped with a cord and handles to easily remove earplugs.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
For collective lock-out situations involving a large number of employees and equipment. Can also be used as a storage unit for locks. The contents can be easily viewed through the transparent front plate. 18 brackets for keys and 2 slots for locks. Components not included
Brady portable storage stations ensure that your locking systems are easily accessible and ready for use at any time. These compact and robust stations come with an attachable handle for greater mobility and screw holes for permanent wall mounting. The lockable, semi-transparent cover protects the contents from exposure to tough environments. Create one box per employee or share a box with the team. It's never been easier or cleaner to take your work equipment with you.
Easy lock® Pre-assembled filters EN4387:2004 + A1:2008 Pre-assembled A2P3 R filter which uses Easy Lock® system to connect to face-piece with 1 click, without adapter. All Moldex products and packaging are 100% PVC-free.
The 3M™ Headgear G500 provides a versatile and comfortable solution for wearers who require both face and hearing protection. With special design features making it easy to combine the headgear with other 3M safety product such as face shields, passive earmuffs or communication headsets and integrated eyewear.
Rebel fall-prevention device with 10 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical use. Weight: 5.6 kg. Can be maintained.
High-shoe Ethyl in water repellent ECOLORICA with non-metallic toecap and anti-perforation sole. Inner lining in textile, anatomically shaped foot-bed. Outsole: PU/TPU. Sizes: 38-48.
White clog OB in soft, white leather. Special sweatabsorbing lining with Silver Point. Very light antislip sole in PU with shockabsorption and resistant to gasoline. Removable insole. Treated sanitized. Step-in surface with elastic band and adjustable fastening buckle. Sizes: 35-48.
Safety signs - wear protective clothing. Diameter: 200mm. Colour: White on blue.
Stainless steel splinter tweezers Feilchenfeld 9cm
