BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Hood with ARC protection (APC 2). This rain hood offers protection against heat, flames, liquid chemicals and offers also protection in welding situations. Available sizes: S-3XL. Available colours: Navy.
Soft and form-retaining Hi-Vis T-Shirt in tricot with a cotton finish on the inside for comfort. T-Shirt short sleeves with heat seal reflection. Quality: 113: 55% polyester / 45% cotton, 200 g/m². Available colours: Fluo yellow/navy and fluorescent orange/navy. Available sizes: XXS-4XL. Complies with: EN ISO 20471 class 1-2.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in Gore-Tex. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Trafic Rescue Helmet; It can be esuipped with with hearing protection and clear visor. It can also be fitted with high performance XP-lamp and SCBA mask for rescue in toxic and dusty environments.
Sponge sweatband for welding helmet G5-01. Packaged in sets of three. Not separately certified as PPE.
Helmet adapter for the uvex pheos visor - magnetic and K2P earmuff. Combination with uvex pheos and uvex alpine helmets. No PPE.
Exterior: Stand-up collar, concealed snap button closure under facing 2 patch chest pockets with flaps with hidden press studs, 2 patch side pockets with flaps with hidden press studs, 2 loops for gas detectors, round sleeves, sleeve narrowing by means of a button. press studs, flame retardant reflective tape (50 mm). Inside: 1 inner pocket, identification label. Material: Sio-Safe Essential Eco: 50% cotton + 30% Tencel = 19% recycled polyester + 1% AST. +- 320 g/m. Complies with: EN 61482-2 ELIM 9.7 cal/cm² - ATPV 11 cal/cm², EN ISO 11612 A1 A2 B1 C1 E3 F1, EN ISO 11611 Class 1 A1 A2, EN 1149-5, EN 13034 (Type PB 6), EN 17353, EN ISO 13688. Available colours: navy-fluo yellow Available sizes: 44 - 64
Cut-resistant glove in special graphene fibers with HCT® Nitril Nano-foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers. Touchscreen compatible.
High shoe in black full grain leather, with an aluminium 200J toecap and steel anti-perforation sole. Fitted with a breathable, abrasion resistant Cool comfort and Odor Control liner in polyester mesh. Outsole in PU/Nitrile (bio-based recycled rubber), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: W 38-48 / XW 38-48.
Proflex knee support with reinforced nylon shell for protection against perforation. The knee support is filled with a gel for bette r comfort and support. The Proflex is cut resistant, abrasion resistant and has a non-slip surface for better grip on the work surfa ce. Sizes: universal size.
Sign according GHS normation in self adhesive polyester: health risk. Size: 100x100mm. 4 labels per card. No PPE.
Screen carrier helmet in aluminium. Foldable and with a good positioning. Extra seal for protection against dust. In accordance with: EN 166/ EN 167/ EN 168/ EN 170.
Seal as protection for the head, neck and shoulders as spare spart of hoods M-106, M-107,M-206,M-207, M-306, M-307. No PPE.
Refillable panel with first aid material for minor accidents. Clearly organised, with instructions. Content: plasters, disinfectant wipes, protection kit, bandages to stop bleeding. Dimensions: 56 x 29 x 12 cm. Refill: art 1039554. Content: 2 Cederroth 4-in-1 Bloodstoppers (REF 1910) 3 Cederroth 4-in-1 Mini Bloodstoppers (REF 1911) 1 (x 2) Cederroth Burn Gel Dressings (REF 901900) 1 Cederroth Eye & Wound Cleansing Spray 150 ml (REF 726000) 1 Salvequick Plaster Dispenser including 45 Plastic Plasters (REF 6036) 40 Textile Plasters (REF 6444) 1 Soft Foam Dispenser including 6 cm x 4,5 m Soft Foam Bandage Beige (REF 51011019) 1 (x 20) Salvequick Wound Cleansers (REF 323700) 1 Cederroth Protection Kit (REF 2596) 1 First Aid Instructions 1 Key
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6100FC.
Dispenser for use of 2000 ml Protect soft bottles.
Purple nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
Dupont Tyvek® 500 HP (Harness Protection) TY178S HP coverall with four D-ring sleeves attached to the garment.
Thermo ladies t-shirt with long sleeves, polyester/viscose.
This low safety shoe is metal-free, sporty, lightweight and dynamic. The ingeniously designed tongue keeps moisture and dirt out. Are you on your feet all day long? Experience optimal comfort and ultimate grip thanks to the use of nubuck leather, a soft insole with comfortable PU foam and the Framework PU outsole. This S3S safety shoe is ideal for people who work outdoors.
Stretch trousers with knee pockets and tool pockets from the Progression collection, enhanced visibility EN17353.
Looking for a sporty and agile safety shoe? The ultra-light E-BOUNCE S3S BLACK/ORANGE lets you move effortlessly. Thanks to the sole that returns energy with every step, you experience a unique "bounce". This allows you to work comfortably, fit and optimally protected all day long. Lightweight and dynamic Energy-returning sole Anti-slip sole Sizes 36-40 made on a narrow last
Sportive spectacles in clear polycarbonate. The uvex i-lite impresses with its flat lens geometry as well as its modern design. In addition, the ergonomically shaped arms with multi-stage tilt adjustment ensure an optimal fit without pressure points.The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Low shoe in microfiber/cordura, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole. Made partly from recycled content; in lining, laces, insole. Sizes: D, 36-48 / XD, 39-48.
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.
Clear tri-acetate face shield (225 mm). Suitable for use on the Centurion Vulcan using the optional, ingeniously devised, multi-func tional face shield holder S57.
Comfortable air hood made of neoprene with a panoramic PVC visor. The required air flow from the compressed air line is between 220 and 280 l/m. An audible alarm signal warns of a loss of pressure. The hood is supported on the shoulders so the head can move freely . Available in: yellow. Sizes: universal.
Empty first aid kit box made of impact resistant ABS plastic. San (320 x 220 x 125 mm) for maximum 20 people.
Small, multifunctional bin for quick and efficient response to leaks or maintenance projects, anywhere in the factory. The spill kit includes a handy inner panel with well organised, clearly legible leakage guidelines. Absorption capacity: 59 litres. Content: 1 roll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of UN quality.
Gaiters, aluminized para-amide, 500gr./m², Velcro closure, no lining,strap under sole, long-term use. Dimensions: length 36cm.
High shoe in nubuck leather and Techno leather (long-lasting), with a steel anti-perforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant Vent-Air liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Earplug in TPE with soft strips for an easy fit in the ear canal. Equipped with a cord and handles to easily remove earplugs.
Model wallmounted eye/face wash including a stainless steel 11" round bowl, antimicrobially treated Axion MSR eye/face wash head to help protect against the growth of mold and mildew on the treated components. Inverted directional laminar flow and integral 3.7 and 1.3gpm flow controls, chrome-plated brass stay-open ball valve equipped with stainless steel ball and stem, and chrome-plated brass in-line 50 x 50 mesh water strainer. Unit shall also include cast-aluminum chromate protected wall bracket, tailpiece and trap, universal sign, 1/2" inlet, and 1-1/2" waste.
Belt, decontaminable, as spare spart for motor unit Versaflo. No PPE.
Fire resistant protection seal for breathing tubes BT. No PPE.
The 0.63 mm thick stainless steel blade is ideal for various materials. The ergonomic aluminium holder offers a high degree of stability and is suitable for right and left handers. The thumb can remain on the slider while cutting but the blade will slide back after use. Ideal for use with safety gloves. Replacement blades 199: 1016574
Comfort for static kneeling situations. Closed-cell foam is non- conductive, resistant to petroleum, and silicone-free. Beveled safety edge, convenient handle. Dimensions: 46 X 91 X 2,5cm. No PPE
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Gore- Tex. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Pull straps in leather Sizes: 38-48.
Low shoe S2 in strong waterproof leather. Lining in merry mesh and a small layer of PU foam. With 200J steel toecap. Sole in nitrile with strong anti-slip resistance and good shock absorption. Removable insole with high comfort. Steel leg with added support. Sizes: 38 - 47.
This is the first Box Cutter in the world with a ceramic knife. The special shape of the handle protects your hand from injury. Opening boxes is fast and safe. The blade can be put into 3 positions quickly and easily for a longer/shorter blade. • Includes a double sided ceramic knife. • Remains sharp 10x longer than a steel blade. • Blade is fully extendible and adjustable. • Easy blade placement. • Reserve blades available. In packs of 4 (1027188). For left and right handers
Set of 10 smoke tubes for establishing and checking air currents when checking ventilation systems, for the detection of leaks in pipelines, stoves and windows, and checking ventilation systems in mining.
Pezatec and Pezaflex stretch outer fabric. Outer fabric treated with water repellent Teflon HP. Pezaflex inserts under the arms. Waterproof Tektor reinforcement on shoulders with reflective piping. extended back. back and underarm ventilation. Elastic waist. Ergonomic collar. Sleeve narrowing by Velcro closure. large red area: arms and chest. 1 patch pocket on the left arm with smartphonepocket "splash proof". Zipper. 2 inset side pockets with "splash-proof" zipper.
Men's trousers in 65% polyester/35% cotton, 245 g/m² with 2 side pockets, 1 thigh pocket, 1 back pocket with flap and ruler pocket. Modern design with hi-vis details. Available sizes: 36-64. Available colours: Grey/Hi-vis orange, Navy/Hi-vis yellow. No PPE.
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: ▪ High in 1 piece upright closing collar with wide closure. ▪ Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. ▪ YKK anti-panic crystal closure with a waterproof flap and velcro closure. ▪ Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. ▪ Pre-formed 3D sleeves with insert. ▪ Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! ▪ Equipped with external elbow protection and reinforced sleeve ends. ▪ The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. ▪ Extended back for better protection.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Width: 2,54cm, lenght: 2,74m Not PPE.
3M™ Solus™ 1000 is an adjustable safety spectacle. It has a Scotchgard anti-fog layer which protects longer than a normal anti-fog layer. Marking: 5C-3.1 1 FT KN.
Folding mask, class P2, for harmful dust. Comfortable 3-piece folding mask. With non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 10.
The 3M™ DBI-SALA® Utility Belt XL/3XL (102-137cm) is compatible with all 3M™ DBI-SALA® belt holsters and tool pouches. Padding inside two layers of Cordura provide for durability and comfort. No PPE.
Rolled quick bandage, suitable for dressing a wound. Dimensions: 6x8cm. Handy for larger wounds on a straight section of an arm or leg.
Creamy handwash foam for stressed skin. Contains moisturizing conditioner, aloe vera and glycerin. Skin neutral pH and citrus perfumed. Contains 1000ML. Suitable for showering. With Ecolabel.
Sleeve in polyester, nylon and glass fiber with adjustable Velcro strap system.Lenght: 475mm. Characteristics: Cuff with excellent protection against heat, cut risks and abrasion.Thermal protection upto 100°C. EN388:2.5.4.2 and EN407:X.1.X.X.X.X
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with 2 Skalt Comita aluminium hooks with 20 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
Detectable beard mask in polypropylene with metal strip. Perfect for use in food or agro industry. Available colour: blue.
Sporty lightweight (34 gr) goggles with grey polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety, standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With textile headband. Includes Supravision extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
The work jacket offers plenty of storage options due to the different pockets. By being able to cover all metal push button closures, this work jacket is extremely suitable for the automotive sector or other activities where the prevention of damage to the surface is very important. This is also a very pleasant portable and multifunctional work jacket for other sectors. Available sizes: XS-5XL. Available colors: navy, black and dark gray.
Glove with black HPPE and Zirnium and black PU coating and reinforcement in black split leather on palm, and fingers. Unique combination of wear-resistant leather while maintaining high finger sensitivity. Highest cut resistance. Sizes: 7-11, lenght: 25cm.
Radiant heat cover to cover head and shoulders for airhoods M-400. No PPE.
Deb® InstantGEL Complete is an alcohol-based, silicone-free gel hand sanitiser that is proven to be fully virucidal, bactericidal and yeasticidal. The formula contains purified Hamamelis astringent extract, helping to prevent the skin from softening when sweating during glove use and providing skin protection in addition to its sanitising properties. No PPE. Authorisation number Belgium : NOTIF1173 Use biocides safely. Always read the label and product information before use
The Slice® 10593 Auto-Retractable Utility Scraper is another finger-friendly® addition to our expanding line of safety tools. It fea tures a rounded-tip 10526 safety blade housed in a sturdy, ergonomic, reinforced nylon handle with soft grips for user comfort. Compared with manual scrapers, auto-retractable scrapers typically risk causing hand strain as the user absorbs pressure in the thumb that keeps the blade extended. Slice solves this problem by introducing SureScrape™, a mechanism that reduces strain so users don’t have to choose between safety and comfort. As with all Slice safety ceramics, the 10593’s blade is oil and lubricant free, chemically inert, and never rusts. No PPE.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The Melfi looks like a simple navy blue sweater with long sleeves, but it protects you against industrial hazards such as arc flash, heat, flame, and flame spread. This sweater with arc protection has a round neckline and elastic hem and wrist bands. Simple but effective. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Navy. Complies with: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (17.8 cal / cm²), EN ISO 14116.
The Hi-Vis class 3 BasePro chainsaw pants have been developed to offer the highest possible protection against frontal chainsaw according to the EN 381-5 standard: Zipper and 1 button closure; 2 deployed pockets; 1 patched back pocket with zip; 1 patch pocket for pleoimeter and system for fixing the spark plug key; Elastic waist with loops for belt and loops for suspenders with velcro; Lumbar top with suspender loops; 3-needle stitching on the back to the cross. Quality: 65% PES / 35% cotton. Available sizes: S-3XL. Available colors: FLuo yellow / black and fluorescent orange / black. Compliant with: EN ISO 20471: 2013 + A1 2016 / Class 2, EN 381-5: 1995 / Class 3 - 28 m / s design A and EN ISO 13688: 2013.
Handle type: smart-retracting, Ergo Pull™ slider reduces strain, Compatible blades: 10526, 10528, Finger-friendly edge stays sharp 11x longer, Reduces injuries, lowers costs, Non-sparking, non-conductive blade, Includes 1 dbl-sided rounded-tip safety blade, Ambidextrous design, Chemically inert blade never rusts, No-tool blade change, Fewer blade changes = fewer injuries. No PPE.
Comfortable and breathable overall with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 44-64.
Women's version of the T-shirt exactly 190 with long sleeves: - pre-shrunk material; - 1x1 rib-knit collar; - double thread stitched sleeves and bottom hem; - provided with side seams. Quality: 100% ring-spun jersey cotton, 185 g / m². Available sizes: XS-3XL.
Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside). Includes dissipative socks. Available sizes: S-3XL. Available coloours: Gray.
Medium duty glove with TPR impact protection on the upper hand and fingers, TPR design with smooth knuckles and 2 separate fingers. Durable padded red artificial leather palm, with reinforcement around the index finger to protect sensitive areas. The tips of the index, middle finger and thumb are suitable for touch screen work. Good visibility for extra safety. Sizes: 8-13. Conforms to: EN388: 2016 2.1.2.1.X.P
Comfortable half mask in TPE with integrated and replaceable particle filters. for anti-odour protection against nuisance odour, dust, all types of fumes, oil and water mists and micro-organismes. Light weight, silicone and latex free. Sizes: S/M and M/L.
P3 RD with actif carbon Elipse replacement filter for usage on Elipse Integra odour masks. Pack of 10 paires..
