BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Steel carabiner, automatic locking, opening 16mm, weight 160gr, breaking force 25kN.
Stainless steel carabiner with automatic locking, opening 16.5 mm, 210 g, breaking force 23 kN.
High-quality shower gel with a skin-neutral pH. Perfumed, colorant-free.
Exoskeleton to protect the housing of the fall arrestor Helixon-S, especially during horizontal use. Attaches with 4 included screws.
Exoskeleton to protect the Helixon-S fallarrestor housing, especially during horizontal use. Attaches with 6 included screws.
Lanyard made of 11mm thick, sharp-edged kernmantel rope with self-locking aluminum hooks (one scaffold hook and one small carabiner). Maximum user weight: 140kg.
Double lanyard made of 30mm wide polyester webbing with a damper, specially designed to protect operators working at height in envir onments with potential electrical hazards. Maximum user weight: 100kg.
Kernmantel rope with a diameter of 12mm, assembled with a non-removable rope clamp and energy absorber. It features a steel snap hook (manual locking) on one end of the rope and a knot on the other. Suitable for use near sharp edges. The rope stitching is protected by a strong, transparent protective sleeve that also facilitates visual inspection of the seams before each use.
Double lanyard for attaching to the tool loop of a harness on one side and two tools, each weighing up to 5 kg, on the other. Maximum length: 130 cm.
Stretch lanyard for attaching to the tool loop of a harness on one side and a tool weighing up to 5 kg on the other. Max. length: 130 cm
Hands-free system, instant and continuous communication Bluetooth compatible- connect to wireless headsets and Bluetooth enabled phones Multi channel use and group settings within channels Unlimited users Easy set up and configuration Up to 11 hour battery use Quick charge in under 4 hours High-definition audio quality Patented noise filter 900 MHz License-Free Frequency 3 Channels of communication royaltie-free frequencies in accordance with European radio regulations (ETSI) weight: 190g dimensions: 70x110x28mm
The configurator-charger recharges Guardian (plus) terminals and batteries. Can charge and configure 4 terminals/batteries at the same time Intuitive touch screen. Includes a power connector that can be used in conjunction with charger. Extensions to connect a larger number of terminals/batteries.
Very high quality microphone. In combination with earplugs, it provides good communication in noisy environments. Weight: 12 g. With foam, wind protection. Compatible with right and left.
Noise-cancelling HEADSET EPI audio with microphone and neckband
This kit contains 3 Guardian Standard Bluetooth radios, 1 charger/configurator, 1 small carrying case, 1 user guide and power cables.
Black Double LED Beanie with Protective Shell This innovative beanie offers optimal protection and visibility in dark environments. Equipped with dual LED lighting and a removable protective shell compliant with EN 812:2012, it combines safety, comfort, and practicality. With a brightness of 150 lumens and a battery life of 2 to 4 hours at full power, this beanie ensures reliable illumination. It features three light modes: High, Medium, and Flashing. Certified CE and RoHS, it comes with a USB charging cable for easy recharging. Available with or without protective shell. Perfect for outdoor work or low-light conditions – stay warm, safe, and highly visible!
Costs for a hotel stay if the trainer has to travel a long distance for an on-site training.
Neck support size small as a replacement part for Cleanspace Work.
Neck support size medium as a replacement part for Cleanspace Work.
Small emergency kit filled with the essentials for an emergency situation. Contents: 1x 1220 IFAK pouch 21x15x11 cm 1x BRL-GR-1 Green glow stick (single) 1x 1256 Magnesium fire starter 1x 4101b Sterile pressure bandage 7 x 10 cm (single) 1x 18640 Cova disinfectant spray 50 ml 1x 269049 Rescue scissors 18 cm 1x 798K Tweezers 1x 400010-5 Sterile compresses 5 cm x 5 cm, pack of 5 1x 132226A Elastic bandage white 4 cm x 4 m 1x 1260 Multitool pocket knife 1x 732 Thermal blanket
Salvequick Blue X-Ray plasters designed for use in the food industry. Detectable using X-ray or metal detectors. 6 refills of 30 pieces.
An elastic bandage with excellent adhesion, suitable for elbows, knees, and joints. 5 meters & 6 cm.
The Boston splint is an adjustable, X-ray translucent splint covered with a non-toxic material that is easy to wash and disinfect. 11 cm x 92 cm.
The world’s smallest AIS Man Overboard (MOB) device with integrated VHF DSC. MOB2 immediately transmits your location via AIS and activates a DSC distress call on your vessel’s VHF radio, delivering a rapid local alert to crew and nearby boats.
USB-C power adapter 220V/20W
Disposable and antistatic Chemprotex 300 chemical-resistant compressed air hood with a reusable and removable air system. It offers the highest level of protection against chemical particles and liquids. Designed to be worn over protective overalls. 10 year shelf life, airflow 210-400 ltr/min.
Air regulator with removable and washable strap, with a flow rate of 2 to 9 bar, for use with the Activeair Autoflow suits (1064302) and air cap (1064300). Equipped with a male CEJN coupling and an audible warning signal for low pressure.
Short sleeve T-shirt from the High Visibility+ collection, contrast round neck and sealed segmented reflection. Made from 60% organic cotton and 40% recycled polyester. 170g/m².
Option for the LOX4 outdoor charging locker (1064583) to equip the charging locker with perforated metal shelves, a heating cable, and an aerosol system. In the event of a significant temperature increase, the heating cable will melt and activate the aerosol. The aerosol can spread throughout the entire locker and cool or extinguish the heated or burning battery. Important: If you require this option, it must be ordered together with the cabinet.
Option for the LOXK1100 battery cabinet (1063272) to equip the cabinet with an aerosol fire suppression system. Upon detection of smoke, the aerosol is immediately activated and dispersed throughout the entire cabinet. The aerosol cools and controls the battery. Note: This aerosol kit is only sold with the cabinet.
Option for the LOXK12 battery locker cabinet (1063274) to equip the cabinet with an aerosol fire suppression system. Upon detection of smoke, the aerosol is immediately activated and dispersed throughout the entire cabinet. The aerosol cools and controls the battery. Note: This aerosol kit is only sold with the cabinet.
Looking for a sporty and agile safety shoe? The ultra-light E-BOUNCE S1PS WHITE/LIME lets you move effortlessly. Thanks to the sole that returns energy with every step, you experience a unique "bounce". This allows you to work comfortably, fit and optimally protected all day long. Lightweight and dynamic Energy-returning sole Non-slip sole Sizes 36-40 made on a narrow last
This kit contains 8 mobile radio terminals Guardian PLUS Bluetooth, 1 battery charger (with configurator), 2 charger extensions, 1 large hard case (HAC 408), 1 user guide, power supply and cable
Fire Retardant Safety Cap This safety cap is made entirely of 100% cotton, making it both comfortable and flame-resistant. Cotton is a fire-retardant material that provides extra protection in high-risk environments. The cap complies with the EN 812 standard to ensure optimal safety and features an elastic band at the back for a secure fit, preventing it from slipping during work. Thanks to its integrated protective shell, the Fire Retardant cap offers not only impact protection but also fire resistance. Perfect for those who want to combine warmth, comfort, and maximum safety in one product.
The ECO safety cap made from recycled polyester is produced using fibers and a sustainable manufacturing process, reducing its environmental impact. The goal is to promote more eco-friendly practices. This cap features a protective shell compliant with the EN812 standard to safeguard the head against impacts. It is available in black and navy blue, with a 5 cm visor. An elastic strap at the back ensures better stability on the head.
Stainless Steel 304 Pole without Base - 2000x40/100/40/100 mm. Suitable for Red Star (1064579) and Diamond (1064580) lifebuoy cabinets.
This premium safety helmet combines maximum protection with outstanding comfort. The fire‑resistant chinstrap is flame‑retardant and non‑melting, while the click‑in system allows quick replacement of the internal padding. Thanks to the Adaptive Fit System, the helmet automatically adjusts to the shape of the head, with a quick‑release buckle for easy removal, even when wearing gloves. The HD EPS inner shell with thermoformed cover provides excellent shock absorption, and the DRY+ liner keeps you feeling fresh. Reflective decals enhance visibility, while 14 ventilation channels with a sliding closure ensure optimal airflow. The Easy Click System makes it simple to add eye or face protection, and the anti‑intrusion mesh prevents dust and debris from entering. This helmet is built to deliver safety, comfort, and performance in demanding environments.
Kit with adaptors and protective visor for Kask helmets Zenith and primero. Easy to install. Sratch- and fog-resistant.
Replacement shell for the welding helmet (outer helmet) G5-01, flip-up.
uvex 1 x-cite - Dress up for safety
Multirnom ECO work jacket with arc flash protection, made from 50% FR cotton, 30% Tencel Lyocell, 19% recycled polyester, and 1% antistatic.
Work jacket with arc flash protection. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Work trousers with arc flash protection, welding class 2. Made from 79% FR cotton, 20% polyester, and 1% antistatic.
Inherently flame-retardant Multinorm work trousers, made from 54% modacrylic, 45% Tencel Lyocell, and 1% antistatic.
Handmade tough firefighter backpack, made of sturdy and water repellent ripstop fabric. The backpack is 18 cm deep, 40 cm wide and 45 cm high. Equipped with a laptop compartment (15" max) and wide shoulder straps and safe marking. Patch with inscription to be ordered separately (1065151, 1065152 or 1065153).
Large trolley bag for firefighter gear, suitable for storing your firefighter suit, boots, and helmet in separate compartments. This wheeled trolley bag can also be used as a travel bag. Patch with inscription to be ordered separately (1065151, 1065152 or 1065153).
Firefighter bag suitable for a weekend getaway or for use as a sports bag! The firefighter bag has a separate compartment for your shoes. The dimensions of the firefighter bag are 30 cm deep, 60 cm wide, and 32 cm high. Patch with inscription to be ordered separately (1065151, 1065152 or 1065153).
Duffle bag suitable for storing a firefighter suit, boots, and helmet. In addition, this duffle bag can also be used as a travel bag. The dimensions are 39 cm deep, 66 cm wide, and 29 cm high. Patch with inscription to be ordered separately (1065151, 1065152 or 1065153).
Handcrafted, sturdy toiletry bag made of durable and water-repellent ripstop fabric.
Patch for firefighter bags with the inscription "brandweer", back equipped with velcro.
Patch for firefighter bags with the inscription 'sapeurs pompiers', back equipped with velcro.
Patch for firefighter bags with the inscription 'flame', back equipped with velcro.
Float to hang at the end of a sampling hose to prevent the hose from ending up in water.
