Shopping basket

There are no products in your shopping cart.

Back to overview

1000 products found

Filter products

Remove selection

Results for

  • (945)

Prijsklasse

to
  • (5)

Status

  • (25)

Face protection for welding work

1000 products found
Filtered on: All catalogues
LASER SPEC ECO R01.T2K02

Laser spec eco r01.t2k02

Brand: LASER
Prod. No. 1035976

Small, multi adjustable spectacles, reinforced , visible light transmission: approx. 70%  ,color: light gray 850-900 DIRM LB3 LV CE (OD3+) >900-950 DIRM LB4 LV CE (OD4+) >950-<(><<)>980 DIRM LB5 LV CE (OD5+) 980-<(><<)>1030 D LB6 IR LB7 M LB7Y LV CE (OD7+) 1030-1400 D LB6 IR LB8 M LB8Y LV CE (OD8+) >1400-11500 DI LB4 R LB3Y LV CE (OD4+)

 
WELDING FILTER P-KIT 9100 (SHADE 11)

Welding filter p-kit 9100 (shade 11)

Brand: SPEEDGLAS
Prod. No. 1035696

9100 welding filter P-kit: welding glass shade 11, external protection lens and filter holder. Other lens shades (10-13) are also available(to buy seperately).

 
PROTECT LENS INSIDE DIN 2

Protect lens inside din 2

Brand: SPEEDGLAS
Prod. No. 1034267

 
SPEC SECUREFIT 600 PC I/O MIRROR AS

Spec securefit 600 pc i/o mirror as

Brand: 3M
Prod. No. 1037245

Lightweight safety glasses in polycarbonate with mirror lenses and Pressure Difffusion Temple technology for perfect and secure fit. This glasses have very good colour recognition, anti-scratch coating, a large field of view and brings resistance to UV-rays.

 
PROTECT LENS INSIDE DIN 2 9002X

Protect lens inside din 2 9002x

Brand: SPEEDGLAS
Prod. No. 1037391

The inner cover plate is designed to protect the inside surface of the filter from spark and spatter. Can be used to increase +2 dark shades of the welding filter.

 
PROTECT LENS INSIDE DIN 1 9002X

Protect lens inside din 1 9002x

Brand: SPEEDGLAS
Prod. No. 1037390

Replacement inside protection plates with plus 1 shade leve

 
FRONT SILVER FR SPEEDGLAS 9002

Front silver fr speedglas 9002

Brand: SPEEDGLAS
Prod. No. 1037388

Silver front against heat for Speedglas 9002.

 
BIB AND BRACE MULTINORM PORTO 7183

Bib and brace multinorm porto 7183

Brand: VAN HEURCK
Prod. No. 1042042

- All sizes comply with EN ISO 20 471 - Suspender trousers with raised back - Suspender trousers 2 layers + fully lined - Wide loom band - Closing the sides by means of invisible push buttons - Fly with zipper - 2 side pockets on the front with +/- vertical insertion - 1 stitched back pocket with flap closing by means of velcro's (H14xB16cm) - Bite bag with flap closing by means of velcro's - Closing the meter pocket with the flap using velcro - 2 reflection bands per pipe - 1 reflection band on waist front and back - 2 knee pockets with flap closing through velcro's Quality: PES 100% + GORE PYRAD®. Available colors: Fluo yellow / navy. Available sizes: BE 40 - BE 60.

 
CONTOUR SCR PC LIGHT GREEN 235MM ELEK

Contour scr pc light green 235mm elek

Brand: CENTURION
Prod. No. 1042888

Face shield in light green polycarbonate, length 235 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 B 3 8 9.

 
LASER GOGGLE PROTECTOR R14.T1K17.1002

Laser goggle protector r14.t1k17.1002

Brand: LASER
Prod. No. 1039533

OTG goggles reinforced with soft foam cushion , visible light transmission: approx. 65% ,color: light gray 900-<(><<)>1025 DIRM LB7 LV CE (OD7+) 1025-1400 D LB7 IR LB8 M LB9 LV CE (OD9+) >1400-3000 D LB5 IRM LB4 LV CE (OD5+) >3000-11500 D LB5 I LB4 R LB2 LV CE (OD5+)

 
LASER OVERSPEC DYNA GUARD F18.P1L13

Laser overspec dyna guard f18.p1l13

Brand: LASER
Prod. No. 1036302

Innovative fit-over frame, flexible temples , visible light transmission: approx. 20 % ,color: brown 180-315 DIRM LB3 >315-532 DIRM LB3 637-661 DIRM LB3 755-<(><<)>940 DIRM LB1 940-1064 DIRM LB2 >1064-1100 DIRM LB1 529-532 RB3 >532-538 RB2 >538-545 RB1 620-<(><<)>631 RB1 631-<(><<)>637 RB2 637-644 RB3 656-661 RB3 >661-666 RB2 >666-674 RB1

 
LASER OVERSPEC DYNA GUARD F22.P1P15

Laser overspec dyna guard f22.p1p15

Brand: LASER
Prod. No. 1045096

goggle (OTG) with foldable temples , visible light transmission: approx. 2 % ,color: grey

 
LASER OVERSPEC DYNA GUARD F18.P1P15

Laser overspec dyna guard f18.p1p15

Brand: LASER
Prod. No. 1045095

goggle (OTG) with flex temples, visible light transmission: approx. 2 % ,color: grey

 
LASER OVERSPEC DYNA GUARD F18.P1L10

Laser overspec dyna guard f18.p1l10

Brand: LASER
Prod. No. 1042505

Innovative fit-over frame, flexible temples , visible light transmission: approx. 40 % ,color: orange

 
SPEC SOLUS 2024 PC RED MIRROR AS

Spec solus 2024 pc red mirror as

Brand: 3M
Prod. No. 1047376

3M ™ Solus ™ 2000 with red mirror PC lens and adjustable ear branches. The glasses are available with an anti-scratch coating. Marking: 5-3.1 1 FT KN.

 
SPEC SECUREFIT 400X PC CLEAR AF AS

Spec securefit 400x pc clear af as

Brand: 3M
Prod. No. 1047368

Very light safety glasses with integrated side screens and with 3M ™ Pressure Diffusion Temple Technology for a comfortable fit. Equipped with a clear polycarbonate lens with Scotchguard (anti-vapor and anti-scratch coating). Combination of soft nose bridge and extra protection at the top of the frame increases comfort and offers extra coverage against flying particles.

 
SOFTSHELL MULTINORM 403012

Softshell multinorm 403012

Brand: TRICORP
Prod. No. 1045316

Stylish multinorm softshell with hood. Quality: 60% modacrylic, 38% polyester and 2% carbon, 350 gr / m². available sizes: XS-5XL. Available colors: Marine. Compliant with: EN-1149-5, EN ISO 11612, EN 13034, EN ISO 11611 and IEC 61482.

 
LED MINI LIGHT FR X-FIT PRO

Led mini light fr x-fit pro

Brand: UVEX
Prod. No. 1041033

LED mini light for X-Fit Pro spectacles. No PPE.

 
PARKA SHIRUDO FLAME

Parka shirudo flame

Brand: VAN HEURCK
Prod. No. 1047791

 
TROUSERS BIZFLAME ARC FR66

Trousers bizflame arc fr66

Brand: PORTWEST
Prod. No. 1050266

Bizflame multinorm trousers with arc flash protection: 100% Metal Free; Flame retardant Industrial washable striping; Knee pockets; 8 storage pockets. Quality: Bizflame Ultra 340g. Available sizes: 28-46 PW. Available colors: Navy and Orange. Conforms to: EN ISO 11612 A1 + A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1 + A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 Class 1 and EN 13034 Type PB [6 ].

 
SPEC SECUREFIT 500 I/O SGAF (BLACK)

Spec securefit 500 i/o sgaf (black)

Brand: 3M
Prod. No. 1051722

For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series.  These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.

 
SPEC SECUREFIT 500 BROWN SGAF (GREEN)

Spec securefit 500 brown sgaf (green)

Brand: 3M
Prod. No. 1051723

For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series.  These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.

 
SPEC SECUREFIT 500 LIGHT BROWN SGAF

Spec securefit 500 light brown sgaf

Brand: 3M
Prod. No. 1051724

For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series.  These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.

 
SPEC SECUREFIT 500 AMBER SGAF (BLACK)

Spec securefit 500 amber sgaf (black)

Brand: 3M
Prod. No. 1051718

For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series.  These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.

 
SPEC SECUREFIT 100 I/O AS AF

Spec securefit 100 i/o as af

Brand: 3M
Prod. No. 1051711

The 100 Series offers a popular sporty lens design, adding a fresh look to the SecureFit family of safety glasses. These lightweight safety glasses feature 3M’s innovative temple design with slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. In addition, SecureFit 100 Series flat and flexible temple design combines well with 3M™ Protective Earmuffs.

 
SPEC SECUREFIT 500 CLEAR SGAF (RED)

Spec securefit 500 clear sgaf (red)

Brand: 3M
Prod. No. 1051712

For eye protection designed for comfort, performance and compatibility, select the 3M™ SecureFit™ 500 Series.  These contemporary safety glasses feature a sporty streamlined lens shape and weigh just 22 g for a sleek, stylish look. 3M’s innovative temple design features slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. The adjustable ratchet temples offer even greater customisation by allowing user to adjust the lens for facial features and eyeglass position. These glasses can combine well with other personal protective equipment.

 
COVERALL WARWICK MULTINORM

Coverall warwick multinorm

Brand: SIOEN
Prod. No. 1048966

Overall Warwick ARC with: Upright collar Zipper with flap and hidden press studs 2 patched chest pockets with flap with concealed press stud fastening 2 patched side pockets with flap with concealed press stud fastening 2 loops for gas detectors 1 ruler pocket with flap and concealed snap button closure 1 back pocket with flap and concealed press stud fastening 1 patched thigh pocket with flap and concealed press stud fastening 2 piercing slots Round inset sleeves Sleeve narrowing by means of snaps Knee pockets Double stitched (2x2) flame retardant reflective stripes (50mm). Quality: 57% aramid + 42% polyester + 1% AST; ± 260 g / m². Available sizes: 44-64 EU. Available colors: Fluo Orange. Conform: IEC 61482-2 class 1 - ATPV 8.0 cal / cm², EN ISO 11612 A1 B1 C1 F1, EN ISO 14116, EN ISO 11611 class 1, EN 1149-5, EN 13034 Type 6 and EN ISO 20471 class 3.

 
ATHOS WELDING CLOTH ROLL 550°C 1Mx25M

Athos welding cloth roll 550°c 1mx25m

Brand: CEPRO
Prod. No. 1052903

Gray flame-retardant PU coating on 2 sides, for strength and slip resistance. For light welding and grinding work. Horizontal use. Free of asbestos. Short-term temperature resistance up to 900°C. Approved according to EN13501-1.

 
CRATOS WELDING CLOTH ROLL 550°C 1Mx25M

Cratos welding cloth roll 550°c 1mx25m

Brand: CEPRO
Prod. No. 1052942

With a silicone rubber coating on both sides. Resistant to a very high mechanical load, thermal and electrical influences. Resistant to most acids and alkalis, dirt and oil repellent, good electrical insulating properties. Free of asbestos. Short-term temperature resistance up to 600°C

 
JACKET TERA TX FR/AS/ARC

Jacket tera tx fr/as/arc

Brand: TRANEMO
Prod. No. 1052688

Flame-retardant and anti-static work jacket with a thin lining. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Completely metal-free. Quality: Tera TX, 260 g/m². Available sizes: XS-4XL. Available color: navy. Complies with: EN ISO 16112 A1+A2 B1 C1 E1 F1, EN 1149-5, EN 13034-6, EN ISO 11611 Class 1, IEC 61482-2 Class 2 ELIM: 15.0 cal/cm² ATPV: 18.0 cal/ cm²). PPE category 3.

 
FRONT COVER G5-02

Front cover g5-02

Brand: SPEEDGLAS
Prod. No. 1049345

Front for the 3M ™ Speedglas ™ automatic welding mask G5-02. Replaces the original if it is worn or damaged.

 
TROUSERS APEX 6621 FR/AS

Trousers apex 6621 fr/as

Brand: TRANEMO
Prod. No. 1053475

Flame retardant work trousers with extra visibility. With swept back side seams and double layering at the front for extra heat protection. The trousers are made in a strong and supple satin, specifically developed for work with zinc and chemicals. Side pockets. Back pockets with flap. Ruler pocket with flap. Contrasting seams. Quality: Apex 300 gsm. Sizes available: 44-64, 146-156, 84-120 SCAND. Available colours: navy/fluo yellow. Complies with: EN ISO 11612 A1+A2 B1 C1 F1, EN 1149-5, EN ISO 11611 Class 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 9.4 cal/cm² ATPV: 12.0 cal/cm².

 
CASE BATTERY ADFLO

Case battery adflo

Brand: SPEEDGLAS
Prod. No. 1050324

Carrying Case for 3M ™ Adflo ™ Battery, intended to be used for charging the 3M ™ Speedglas ™ Work Light when using air supply controls. No PPE.

 
EAR MUFF BAR SPEEDGLAS 9100-QR

Ear muff bar speedglas 9100-qr

Brand: SPEEDGLAS
Prod. No. 1030173

Ear muff bar for welding helmet 9100-QR. Not separately tested as PPE.

 
FILTER/13 WELDING HELMET 9100/100

Filter/13 welding helmet 9100/100

Brand: SPEEDGLAS
Prod. No. 1038632

Automatic welding filter in shade 13 for 9100/100 series.

 
SPEC ADAPTEC PC GREY HS AS/AF (RED/BL) L

Spec adaptec pc grey hs as/af (red/bl) l

Brand: HONEYWELL
Prod. No. 1040959

Safety spectacle with black lenses in PC. Has an adjsutable nosebridge and temple. Has a HydroShield coating: anti-scratch, anti-fog.

 
HEADBAND FR UVEX X-FIT PRO

Headband fr uvex x-fit pro

Brand: UVEX
Prod. No. 1041031

Headband for Uvex X-Fit Pro spectacles.

 
FOAM INSERT SECUREFIT 400

Foam insert securefit 400

Brand: 3M
Prod. No. 1043660

Removable foam insert for Secure Fit 400. Packed by 5 pieces. No PPE.

 
FOAM INSERT SECUREFIT 600

Foam insert securefit 600

Brand: 3M
Prod. No. 1048352

Removable foam insert for Secure Fit 600. Packed by 5 pieces. No PPE.

 
GASDETECTOR BW FLEX LEL CAT U O2

Gasdetector bw flex lel cat u o2

Brand: BW
Prod. No. 1050634

 
FOAM INSERT SECUREFIT 500

Foam insert securefit 500

Brand: 3M
Prod. No. 1051727

Removable foam insert for Secure Fit 500. Packed by 5 pieces. No PPE.

 
BATTERYHOLDER SPEEDGLAS G5 SERIES

Batteryholder speedglas g5 series

Brand: SPEEDGLAS
Prod. No. 1055253

Welding Filter Battery Holder Spare Part for 3M™ Speedglas™ Heavy Duty Welding Helmet G5-01/G5-02.. Not separately approved as PPE.

 
SPEC PURE-FIT PC CLEAR
Durable

Spec pure-fit pc clear

Brand: UVEX
Prod. No. 1055498

Super light glasses (19g) made of clear polycarbonate. Thanks to an innovative new production technology, the uvex pure-fit can be made entirely from just one material. It is made entirely of polycarbonate and is therefore 100% recyclable — just like the product packaging. This makes the uvex pure-fit an extremely durable solution.

 
VISOR EVOGUARD M1 NYLON WIRE MESH

Visor evoguard m1 nylon wire mesh

Brand: JSP
Prod. No. 1055820

Face shield in black woven nylon mesh with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 65%.

 
VISOR EVOGUARD M3 WOVEN STEEL WIRE MESH

Visor evoguard m3 woven steel wire mesh

Brand: JSP
Prod. No. 1055823

Face shield in black etched stainless steel with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 80%.

 
HEADBAND/FACE SCREEN CARRIER EVOGUARD M

Headband/face screen carrier evoguard m

Brand: JSP
Prod. No. 1055825

The Browguard with rotary knob allows you to mount a wide range of face shields. For example, we can mount the face shields M1 (nylon wire mesh) / M2 (woven stainless steel) / M3 (etched stainless steel).

 
SCHROEFFILTER PFR10 P3 (PRO 2000)

Schroeffilter pfr10 p3 (pro 2000)

Brand: 3M
Prod. No. 1058096

P3 screw-on filter DIN 148 in plastic housing with reduced opening. Protects against toxic dust, mist and smoke particles. To be combined with half and full-face masks with standard threads or Proflow motor unit.

 
SPEC SPORTSTYLE PLANET PC CLEAR SUPR EXC
Durable

Spec sportstyle planet pc clear supr exc

Brand: UVEX
Prod. No. 1058595

Sportive glasses. Fitted with temple ends and nose with non-slip
components. Temples consist of 45% recycled material (PCR & PIR) and 22% recycled PET. Equipped with clear polycarbonate lenses that consist of 71.5% mass balanced polycarbonate.Top choice for working environments with dust exposure. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision Excellence coating. Frame: beige/green. PCF (Product Carbon Footprint) = 0,10kg CO².

 
KIT MOTOR UNIT SR500/SR575/SR574

Kit motor unit sr500/sr575/sr574

Brand: SUNDSTRÖM
Prod. No. 1062380

Complete motor unit kit consisting of SR500 motor unit, SR575 (safety helmet) air hood and passive welding filter SR574 with welding shade 10, standard battery, battery charger SR713, leather belt SR503, protective cover for air hose SR59021, 2 x P3 filters SR510, 10x prefilters SR221, 2 prefilter holder, 2 spark arresters SR336, 2 filter adapters, flow meter, plug kit, and cleaning cloth. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.

 
EAR-AND THROATH PROT LEATHER FR 3-PCS

Ear-and throath prot leather fr 3-pcs

Brand: SPEEDGLAS
Prod. No. 1000816

Ear and throat protection, leather, 3-piece.

 
COVERPLATES FR SW FR SPEEDGLAS 9100

Coverplates fr sw fr speedglas 9100

Brand: SPEEDGLAS
Prod. No. 1013626

Coverplates for Sidewindows of the Speedglas 9100. Not separately certified as PPE.

 
WELDING HELMET 100 WITHOUT HEADBAND

Welding helmet 100 without headband

Brand: SPEEDGLAS
Prod. No. 1013610

Welding helmet 100 series without headband.

 
SCR CARRIER HELM+SPEC CENTURION 62X52MM

Scr carrier helm+spec centurion 62x52mm

Brand: UHLEN
Prod. No. 1018385

Face screen carrier in aluminium for Centurion Vulcan. Fitted with mounted glasses. Can be used in combination with Uhlen lenses 62X52MM.

 
BLACKFRONT FOR SPEEDGLAS 100

Blackfront for speedglas 100

Brand: SPEEDGLAS
Prod. No. 1034220

Blackfront for welding helmet 100 series.

 
GOGGLE GEAR 500 PI RX-INSERT

Goggle gear 500 pi rx-insert

Brand: 3M
Prod. No. 1034089

Prescription lens insert available for 3M™ Goggle Gear, 500-Series Splash Goggles

 
PROTECTION NECK/SHOULDER SPEEDGL 9100MP

Protection neck/shoulder speedgl 9100mp

Brand: SPEEDGLAS
Prod. No. 1037732

Protection of neck and shoulder for Speedglas 9100MP.

 
FIXATION SET HEADBAND SPEEDGLAS G5-02

Fixation set headband speedglas g5-02

Brand: SPEEDGLAS
Prod. No. 1049929

Attachment set for headband suitable for Speedglas G5-02 welding helmet. Not separately approved as PPE.

 
CASE GOGGLE

Case goggle

Brand: 3M
Prod. No. 1058321

Case for goggle in microfiber. No PPE.

 
HEAD PROTECTION LEATHER FLUO FOR G5-01

Head protection leather fluo for g5-01

Brand: SPEEDGLAS
Prod. No. 1060129

Extensive protection against UV light, sparks and splashes for the crown of the head, throat/neck and/or ears during heavy welding or grinding applications.

 
SPEC FREE PC CLEAR AS AF

Spec free pc clear as af

Brand: ERGOS
Prod. No. 1062553

Safety goggles for industrial use.
- Suitable for long-term use (optical class 1).
Safety goggles with springs, dielectric (metal-free)
- Enclosing shape: integrated side protection.
- Clear polycarbonate lens. With anti-fog (AF) and anti-scratch (HC) coating as standard.
- Integrated nose bridge.
- Standard polycarbonate springs.
- Weight 23.2 g.
- 30% recycled HDPE bags
- 100% recycled kraft cardboard boxes.

EN 166 : Eye protection - Specifications
EN 170 : Eye protection - Ultraviolet filters - Transmittance factors and recommended use

 
MOTORUNIT ADFLO G5-03 PRO AIR W/O FILTER

Motorunit adflo g5-03 pro air w/o filter

Brand: SPEEDGLAS
Prod. No. 1063732

Complete kit with Speedglas heavy duty welding helmet G5-03 PRO AIR, adflo motor unit and carrying bag, without welding filter.

 
SWEATBAND LEATHER G5-01/03

Sweatband leather g5-01/03

Brand: SPEEDGLAS
Prod. No. 1063733

 
HEAD PROTECTION HIVIZ YELLOW G5-01/03

Head protection hiviz yellow g5-01/03

Brand: SPEEDGLAS
Prod. No. 1063734

Head protection in hiviz yellow for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01/03

 
WELD HELMET AUT G5-03 E WITHOUT FILTER

Weld helmet aut g5-03 e without filter

Brand: SPEEDGLAS
Prod. No. 1063907

Automatic welding helmet from the G5-03 E series in durable, lightweight material. Robust, compact design. Basic head harness. Supplied without cassette.

 
VISOR ARC CLASS 1

Visor arc class 1

Brand: KASK
Prod. No. 1064670

 
COVER SPEC SECUREFIT 3700 (BL)

Cover spec securefit 3700 (bl)

Brand: PELTOR
Prod. No. 1064732

 
KIT VISOR ZEN CLEAR

Kit visor zen clear

Brand: KASK
Prod. No. 1064786

Kit with adaptors and protective visor for Kask helmets Zenith and primero. Easy to install. Sratch- and fog-resistant.

 
BADGEHOLDER ZENITH PRIMERO

Badgeholder zenith primero

Brand: KASK
Prod. No. 1064788

 
WORK JACKET HAUMEA FR/AS/ARC

Work jacket haumea fr/as/arc

Brand: SIOEN
Prod. No. 1065124

Work jacket with arc flash protection. Made from 79% FR cotton, 20% polyester, and 1% antistatic.

 
WORK TROUSERS SOYUZ FR/AS/ARC

Work trousers soyuz fr/as/arc

Brand: SIOEN
Prod. No. 1065127

Work trousers with arc flash protection, welding class 2. Made from 79% FR cotton, 20% polyester, and 1% antistatic.

 
HIGH WELDING SHOE JALAS 1668W S3 HI CI H

High welding shoe jalas 1668w s3 hi ci h

Brand: JALAS
Prod. No. 1065623

This durable and comfortable welding shoe (EN 20349‑2) provides optimal heat protection thanks to its Thinsulate lining and specially treated leather with para‑aramid stitching, resistant to 400°C for up to 30 minutes. The removable insole with advanced shock absorption and two PORON XRD zones ensures extra comfort, while the oil- and heat‑resistant nitrile outsole delivers excellent grip. For maximum safety, the shoe is equipped with a JALAS aluminum toe cap and a steel anti‑penetration midsole.

 
AUT WELDING HELMET G5-03 E F G5-01/03NC

Aut welding helmet g5-03 e f g5-01/03nc

Brand: SPEEDGLAS
Prod. No. 1065654