BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Outdoor cabinet Rotaid Solid Plus with alarm. Suitable for the following AEDs: Primedic HeartSave Y semi-automatic (1060424), Primedic HeartSave YA fully automatic (1060425), Zoll AED Plus semi-automatic (1060426), Zoll AED Plus fully automatic (1060427), Zoll AED 3 semi-automatic (1060428) and the Zoll AEd 3 fully automatic (1060429). Outdoor cabinet seal 10 pieces (1040730).
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist, ozon and smoke particles.
Belt Holster made of plastic. Ideal to have your MARTOR SAFETY Cutters readily (and safely) to hand at all times. There are two ways of attachment: a) at the belt b) clipped to the "rule pocket" edge In this Holster fits: PROFI, PROFI25, PROFI40, MULTISET, MULTISAFE, PRIMAX, IDEAL, PROTEX, MULTIPOS. No PPE
Bag for max. 100 m rope. Made of sturdy plastic. With 2 shoulder straps and 1 handle. Content 20L. Size: 35 x 55 x 23 cm.
Very robust fall-prevention device with winch, 15 metres of stainless steel cable, with integrated shock absorber. Housing of coated aluminium. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes snap hook with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the Rollgliss tripod or davit arm via adapter. For 1 person, max. 150 kg. Weight: 15 kg.
Polyethylene container, absorption capacity of 1150 litres with removable grid and moveable on 4 sides. Dimensions: 2345 x1280 x 640 mm, Colour: Blue. Can be moved with forklift truck.
Stainless steel wall holder for box of disposable gloves. Dimensions: width 255mm x Height 132 mm x Depth 85 mm.
Gas tight suit made of Tychem TK, the most resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has replaceable gloves.Thesuit is designed to be worn over the compressed air equipment. Delivered in a sturdy bag. With pass through CEJN for compressed air back-up. Available in: yellow. Sizes: S - XXL.
The SKH mini kit for absorption of chemicals contains all the material that you need in 1 kit: 2 absorbent cloths 1 pair of gloves 1 waste bag 1 instructions 1 brush Packaging: 4 kits per box. Absorption capacity: 1.7 litres/kit
Eye-catching, signal red galvanised 20L bin. Used for cleaning pads, sponges and other waste that is saturated with flammable and/or environmentally harmful liquids. Waste bin has self-closing lid that is operated with a foot pedal or manually. The bottom edge has ventilation openings to prevent self-ignition caused by heat build-up.
Window & door groove anchor: Adjustable from 55 to 130 cm width. Non-penetrating design, does not damage the construction. The anchor is simply compressed between two vertical sides of structure. Quick and easy to install with built-in settings button, no tools or drilling required.
Hi-vis rain jacket ARC protection Class 1, SIO-SAFE Aqua 310: 2-layers laminated tissu: 60% FR modacryl - 40% cotton (& AST) ripstop with PU laminate ± 310 g/m², High performance laminated fabric, Highly breathable, Taped seams, Different linings/fleeces can be zipped in, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch & close fastening, 1 patched chest pocket, 2 patched pockets, 1 napoleon pocket, 2 loops for badges, Round inset sleeves, Elastic at end of sleeves with narrowing by touch & close fastening, Back length 85 cm (L), Fixed flame retardant cotton lining, 1 inside pocket, Zipper in back lining for placing logos. In line with: EN IEC 61482-2 Class 1, EN ISO 11612 A1.B1.C2.E1.F2. W33, EN ISO 14116 index 3, EN ISO 11611 class 2 - A1, EN 1149-5, EN 13034, EN 471 3.2., EN 343 3.3
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Foreseen with an amber polycarbonate lens with a antivapor and anti scratch coating.
Orange Box for stretcher (art 1027965), with 1 shelf and lock. Dimensions: 130x62x23cm
Rescue sign - Emergency exit left in self-adhesive polyester. Dimensions: 200X200mm. Not PPE.
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Sensors must be deactivated separately as required. Version: O2, CO. IP rating 65 and Atex approved.
all arrest block Rebel 30 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13,4kg.
Cover for TR-600 can be combined with filter TR-6820E.
TOOL CINCH ATTACHMENT with two wings - 15.9 kg maximum carrying capacity
Sign according GHS09 normation in self adhesive polyester: Hazardous to Aquatic Environment. Size: 21x21mm. 250 pieces per roll. No PPE.
Long waterproof detectable plaster. Suitable for food industry or anyone who comes into contact with food. The plasters are blue and are easy to spot. Dimensions: 18cm x 3cm.
Mandatory sign - Safety gloves mandatory in self-adhesive polyester. Dimensions diameter: 50mm. Not PPE.
Sportive spectacles in grey polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. The grey polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
30-minute fire safety storage cabinet high model with 2 hinged doors in the colour signal yellow fitted with a cylinder lo. Interior with 3 collection boards (epoxy-coated steel) with load capacity of 50kg and collection capacity 33L, and a bottom collection bin with capacity 33L. Dimensions (exterior): 1164 x 620 x1947 mm. Weight: 292kg. Delivery in house is possible on request.
Hot dip galvanised steel drum cart. Capacity: 220L. With removable steel grid, with handle, 100mm diameter wheels, 2 fixed, 2 swivel wheels and brakes. Height of container: 345mm. Height under the tray: 150mm.
Handsirene standing model Material: aluminium legering Frequency = 600 +- 20Hz Capacity = 120 +- 2dB(A) at distance 1m Product dimensions: L410mm x B400mm x H750mm Weight: 9kg
Adaptable to most walkie-talkies and phones. With D-ring. Can be attached to a belt or harness Not PPE.
Set of 25 2.5 cm diameter rings to attach to apparatus of maximum 0.9 kg when working at height. Not PPE.
Refill for mobile spill kit 69L SKO-CART for quick and efficient response to leaks or maintenance projects, anywhere in the factory. Content: 1 roll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of MRO quality.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 5m. Anchor point for protection of one person.
Replacement hood T-airline 1000 chem 1 (2 pieces).
Polo shirt, 100% cotton, 180 g/m², classical collar, front closure with buttons, neck tape, sewn in long sleeves with manchette, splits at the side. Available in: navy. No PBM
Safety helmet with integrated eye protection made of ABS with grey reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated face shield (class 1) made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Storage bag for V-Gard 900.
Stickerset red reflective of 5 pieces for the V-GARD 900 helmet. No PPE.
Msa’s replacement hard hat 6-point fas trac suspension offers a combination of advanced features for a comfortable and secure fit. Is has a quick and easy adjustment.
Thigh protection for riot police forces.
Waste water tank 1000L.
1/2 day training anti-fall protection by 3M (Capital Safety) at the training center of 3M.
1/2 day on-site training fall protection by 3M. Content and location according to your needs.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values: 1,6 - 3,2ppm.
Visor carriers allow use of faceshields with helmets. Clips into universal slot ear defender housing for the Evolution® range.
Women's jeans with hidden zipper, 2 wide side pockets, 2 large back pockets, 1 with flap, loose ruler pocket with mobile phone pocket, large hanging hip pocket with flap and extra tool pockets, triple stitched seams on vulnerable places for extra long life, pre-formed trouser legs for very good fit, wide belt loops, adjustable hammer loop push button, highly breathable stretch fabric (polyamide / Lycra) in the back of the knee for optimal wearing comfort, 1 D-ring for badge holder, reflective piping. Quality: 66% / 30% / 3% / 1% recycled cotton / cotton / polyester / Lycra, 407 gr / m2. Available sizes: Width 30-38. Available colors: Marine.
Work effortlessly in extremely cold temperatures with this practical and comfortable Olmet cold storage coverall. With an inner collar in fleece and a fixed quilted lining you will not easily get cold in them. The knitted cuffs in the sleeves have a thumb hole for your comfort, the sleeve narrowing and the adjustable hem at the leg ends ensure that every bit of wind is kept out. The Olmet is provided with knee reinforcement for your comfort, elastic narrowing in the back and zip fastening with flap and touch and close fastening at the bottom of the leg. In addition to the five handy pockets, including one inside pocket and one sleeve pocket, this coverall can be fitted with a hood (available separately). Quality: 100% polyamide; ± 185 g/m² + HV - 100 % PES ± 220 g/m² - Hi-vis Cordura: 100% polyester ± 210 g/m²Lining: ISO / Soft®. Available sizes: S-3XL. Available colours: Navy/fluo yellow.
Hi-vis T-shirt with round neck, reinforced ribbed collar and functional material that transports moisture away from the body. The T-shirt is also quick drying, shrink and wrinkle free. Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow. In accordance with: EN ISO 20471 class 3 (class 2 for sizes XS-M).
The 3M™ Peltor™ LiteCom Pro III earmuff is a high-performance hearing protector with a built-in communication radio for cable free short-range communication with other LiteCom headsets and portable two-way radios programmed on the same frequency. Bluetooth® Multipoint connectivity for connecting mobile devices The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. SNR: 33dB. Possibility of programming your own frequencies (not included in the price). In accordance with: EN 352-6
Heavy duty welding helmet G5-01 without welding filter and neck or head protection, with replacement shell. Designed for heavy welding and grinding and can be connected to the Adflo powered protection for a TH3 class respiratory protection (NPF500). Cassette (available separately). Conforms to: EN379/ EN175.
High shoe in black microfiber/textile. Foreseen of a soft inlay sole with breathable liner. Sole in PU/rubber. Laces with sidezipper. Sizes: 35-51
The 3M™ Peltor™ WS LiteCom Plus neckband is a high-performance hearing protector with a built-in communication radio for cable free short-range communication with other LiteCom Plus headsets and portable two-way radios programmed on the same frequency. The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. Bluetooth® multipoint-connectivity. SNR: 31dB. In accordance with: EN 352-1
High shoe with brown water resistant microfiber upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in Artico 3D: antibacterial. Outsole in PU/TPU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
Visor made out of PET with anti-fog coating with elastic strap. Dimensions: 22x33cm. This face shield protects against drops and spl ashes of liquids. Thus, it reduces the risk of a droplet infection. Due to its design, complete protection against viruses, bacteria or other biological agents is only given to a limited extent. Can be combined with face protection masks.
Comfortable hi-vis work clothing designed for ladies. This jacket with ARC protection, made of a breathable, non-allergenic flame-retardant fabric with moisture-regulating properties, features double-stitched reflective FR strips for increased visibility. The sleeves can be narrowed to protect your arms and with four pockets on the outside and one on the inside, this tailored jacket is not only beautiful but very practical, too. Quality: Sio-Safe™ Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g/m². Available sizes: C36-C52 Available Colours: Fluo yellow/ navy.
SIP Protection BasePro chainsaw jacket. The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work: Short and straight collar; Zip closure; 2 inset pockets with zip closure; Sleeve narrowing by press studs; Back ventilation; Elongated back tail. Quality: 65% Polyester - 35% cotton outer fabric ± 210 g/m². Available sizes: S-4XL. Available colours: Fluo yellow/black and fluo orange/black.
Microflex flame retardant rain pants: - Elastic waist; - Welded seams; - Adjustable snap closure on the legs; - Wind and waterproof. Quality: PVC-PES / COT, 390g / m². Available sizes: L-3XL. Available colors: Royal blue. Compliant with: EN 343 class 3: 1, EN ISO 14116, EN 1149-5, EN 13034 and IEC 61482-2 class 1 (21.1 cal / cm²).
The Rigi jacket with snap closure has been specially developed for the food industry. This jacket can be washed at 95 ° C for optimum hygiene. The jacket with fixed hood and elastic wrist bands keeps you perfectly dry thanks to the Flexothane® quality: Fixed cap; Hidden snap closure under siege; Raglan sleeves; Elastic wristband; Back length 105 cm (L). Quality: Flexothane® Kleen: 100% polyamide 6.6 knit with PU coating; ± 170 g / m². Available sizes: S-3XL. Available colors: White and blue. Compliant with: EN 14605: 2005 + A1: 2009 Type PB (4), EN 343: 2003 + A1: 2007 Class 3-1 and EN ISO 13688: 2013.
A comfortable and functional ladies chef's trousers. The semi-elastic back ensures a good fit and freedom of movement. Equipped with a button and zipper. Other features are the side pockets and a patched back pocket. Characteristics: Durable durable twill fabric, very colorfast; No shrinkage, the clothing retains its shape wash after wash; 3 storage bags; Stuffed back pocket; Side pockets; Semi-elastic waistband for a good fit. Quality: 65% Polyester, 35% Cotton 190g. Available sizes: S-2XL. Available colors: Black.
This new patented Dry Cooling technology, in partnership with Inuteq B.V, is designed to provide enhanced cooling comfort for the wearer. This revolutionary technology is activated with a small amount of water and re-activation is only required every 1-3 days depending on the environment, humidity and airflow.
Salvequick Fngertip plasters are high quality flexible plasters. The patches are allergy tested. They are easy to apply, flexible and easy to use. Pack of 6 refills. Each refill contains 15 plasters (87 x 56 (23) mm).
Elbow brace with: Perforated neoprene; Spandex mesh in elbow crease; Binding and pre-curve design; Adjustable hook and loop strap. Available sizes: S-2XL.
Seamless knitted polyamide/elastane grey glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 25 seconds). Suitable for handling, and precisionwork in dry and oily conditions. Sizes: 7-11.
Crape band red band 10cmx4m (20pcs).
