BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Martor spare knife 179.60. Packed per 10 pieces. For safety knives Secunorm 380, Argentax Jumbo, Argentax Cuttex 18mm.PPE Category not applicable.
Super-light safety helmet with short peak, made of strong polypropylene. With 4-point textile suspension (51-62 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient ratchet. With innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Low shoe in leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 39-48.
Dust mask, class P3, for toxic dust. Mask with nose bridge and seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the ma sk. Mask has rigid cup form for better retention of the shape of the mask during use. Fitted with non-adjustable, elastic headbands. NPF: 50.
Maintenance, repair of fall arrester block < 15M. Price does not include any parts to be replaced. In Belgium mandatory to combine with 1030276. ‘Inspection EDTC Belgium’ (after repair inspection of EDTC).
Gown Tychem 2000 C (Shin-length) with rear closure, knitted cuff with double cuff system, mandarin collar. Stitched and over-taped seams. Available sizes: S/M and L/2XL. Available colours: Yellow.
Leather glove, Unlined, 0,6-0,7 mm, Full grain goatskin, Nylon, Cat. II, Blue, white, Elasticated 180°, for fine assembly work . EN 388:2003, 2010
Supple and chemically resistant gloves made of neoprene on a cotton liner. The exclusive outer finish provides an excellent grip. Sizes: 7 / 8 / 9 / 10 , length 35.5 cm.
High-cut, black safety shoe in full grain leather with steel toecap and antiperforation midsole. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight duocomfort (PU/Nitrile) outsole, with heel profile, high wear resistance, antistatic, slipresistant, resistant to oil, petrol and acid, high shock absorbency.
Hi-vis rain jacket / 100% waterproof / Windproof / Highly breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Very comfortable / Supple / Very light / Taped seams / Outside: Fixed hood in collar / Zip closure under flap with press studs / 2 patched pockets / Round inset sleeves / Sleeve narrowing by press studs / Underarm ventilation / Back length 85 cm (L) / Inside: Fixed lining: mesh in body and polyamide in sleeves / Fabric: SIOPOR® Regular: / 100% polyester / Fabric (plain weave) with / 100% PU coating; ± 155 g / m² Colour: FC1 hi-vis orange - FY1 hi-vis yellow - FR1 hi-vis red
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Visor in actetate in order to be able to clean the visor with thinner. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
The SC1 in bleu laminate is a single use Type 3 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter. One piece construction, with chemically protective laminated gloves Kemblok welded to the suit material and integral socks in the same blue laminated material. Hood with neoprene rubber face seal. Sizes S - XXL: SCertified to EN14605:2005
Low black safety shoe in water resistant full grain leather. Lining in spandex and pig leather. Strong anti-slip sole in PU / Nitrile with steel leg for optimal foot support. Removable EVA insole. Sizes: 38 - 47.
Low shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Safety glasses with transparent frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The p ermanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes. Not supplied with glasses cord (can be ordered separately: 1034594).
Low shoe in mesh, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in EVA/TPU/Rubber, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Antistatic chemical-resistant gloves for protection against oil, paint, solvents and detergents in environments with a risk of electrostatic discharges.
Soft flexible liner offering suppleness and dexterity. Excellent tactile sensitivity with superior comfort. Anatomically engineered, reducing hand fatigue and increasing comfort. Excellent grip performance for safe handling in dry-to-oily applications. Sizes: 7-11. Complies with: EN388:2016 4.1.3.1.X
The upper is made of washable microfibre. The closure features an elastic strap under a waterproof flap. The breathable textile lining provides extra comfort. The composite safety toe cap offers protection up to 200 joules. The shoe is equipped with a PU2D sole.
High shoe in brown water proof full grain leather AP 23, which was treated by Jallatte in an exclusive manner. This high quality leather offers an extra protection against humid weather conditions and spots. The shaft has a leather lining in order to protect the ankles and the Achilles tendon. The dual density sole out of Softane has a good slip resistance and protects against oil and hydrocarbons. This shoe has a good shock absorption. Perforated nose in Aérane-Tech polymer, which makes the shoe lighter. Thanks to these perforations the sweat can easily leave the shoe. The midsole is seamed directly onto the shaft which makes that the foot is 100% closed in. The anti-perforation midsole Flextane HP by Jallatte is 100% Composite. Sizes: 35 – 48.
Heat and cold insulating insert sole made of 100% wool. Fits in any shoe and is mainly worn in the winter. Material: 100% wool. Suit able for: general industrial applications.
Fallline length 1.5 meters, diameter 10.5 mm. Kernmantel line, on one side a standard snap hook and on the other side scaffolding hook Maxitube.
Seamless glove with nitrile 3/4 coating. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
Low shoe OB in waterproof, perforated full grained leather. Lining in mesh and PU foam. PU / Nitrile sole with good anti-slip. Removable Enduromax insole with good air circulation and heel support. Sizes: 38 - 47.
Chin strap, 4-point, for Iris II and Kara helmets. Features a chincup and velcro.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Has different diopters (+1,5/+2/+2,5). This glasses have very good colour recognition, a large field of view and brings resistance to UV-rays.
Duolens glasses with modern fashion-look and extra eyebrow protection. Size is between the Pheos and the Pheos S. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with temple ends with non-slip components. Polycarbonate CBR65 lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog- free on the inside and easy to clean. Frame: white/black.
The Urbino fleece sweater protects against cold and against the thermal risks of an electric arc flashover. The sweater with upright collar and hidden zipper was provided with an elastic hem and an elastic in the sleeve ends. As an added advantage, the soft fleece fabric was treated against pilling. Quality: Double-sided fleece: 54% Protex + 34.2% FR cotton + 10% polyamide + 1.8% AST; ± 310 g / m². Available sizes: S-3XL. Available colors: Marine. Complies with: EN ISO 11612 A1.B1.C2.F1, EN 1149-5, IEC 61482-2 Class 1, EN ISO 14116 and EN 14058.
Short jacket with hidden zipper and concealed press studs, 2 front pockets with flap, 2 inset chest pockets, back pleats for extra freedom of movement, escape mask loop, extra arm support to promote freedom of movement, cuffs with Velcro, extended back and reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: 44-66. Available colors: Black / gray, gray / blue, corn blue / navy and gray / red.
Low shoe S1P in synthetic microvelour with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12, 14: 35- 52.
Apron made of polyester / cotton with 3 pockets. The Gladys apron has a standard length of 80 cm. Available sizes: S-XXL. Available colors: Black, royal blue and gray.
Apron Prochem® with long sleeves and taped seams.
Low shoe in microfibre/textile with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Seamless lightweight, 100% waterproof and windproof glove that is very finger-sensitive and gives you maximum dexterity. Laminated membrane technology for great protection against rain and moderate cold. This glove is characterised by its 3-layer construction with lamination technology, perfect and tight fit, very durable knitted nylon outer layer, fitted with waterproof PU membrane, ultra-thin and breathable ,Merino wool lining with moisture wicking anti-bacterial action and silicone MoG print on the fingers and palm for good grip. Sizes: S (7/8) - M (8/9) - L (9/10) - XL (10/11).
J-Energy series. High shoe in nunuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a brea thable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42. with: EN ISO 20345 S3 CI SRC.
Green hearing protector for attachment to helmet, made of combination of plastic and stainless steel. Ergonomic design. Ideal protection against loud noise. Model for attachment to helmet with 30 mm slot.
Smartfit earplugs with removable cord are made of a very advanced material: Kraton. This material responds to body heat and adapts t o the shape of the ear canal. They are also packaged in a handy storage box.
Synthetic wipes, soaked in non-aggressive liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
Winter bomber jacket with detachable sleeves / Multi-functional jacket with detachable sleeves and fur lining / Stitched seams / Outside: Detachable fur collar / Straight collar / Zip closure / 2 patched chest pocketswith zip closure / 2 inset chest pockets / 1 phone pocket / 1 sleeve pocket /1 pen pocket / 1 loop for badge / Detachable sleeves / Round inset sleeves / Knitted wind cuffs at end of sleeves / Elasticated hem / Back length 75 cm (L) / Inside: Fixed lining: polyamide body + quilted sleeves / 1 inside pocketLining: Detachable fur lining / 1 inside pocketFabric: 60% polyamide - 40% cotton; ± 280 g/m² Colour: B75 navy - G60 green - H45 royal blue - M45 gey - N20 black - R18 red
Sundor sole inserts have an underlayer of carbon felt, they not only absorb moisture but odours as well. Sundor also provides good i nsulation from heat and cold. Fitted with slip resistant rubber nodules on the upper layer. Sizes: 36-47.
Gloves made of cowsplit leather with a 7 cm protective cuff. Available in: green/white. Sizes: 8 / 9 / 10.
Lightweight and very comfortable face shield, 450 x 250 mm. With individually adjustable headband and forehead protection. Polycarbonate visor: good impact resistance, heat resistant up to 130 °C. Suitable for: general industrial applications.
Harness with 2 mounting points on back and chest. Breast and back fixation point by D-ring. Leg and shoulder straps easily adjustable. Sizes: S/M; L/XL; XXL. Suitable for general industrial applications.
Replacement knifes for safety knife Profi 40. Dimesions: length: 71,20mm, width: 18mm, material thickness: 0,50mm. Package: per 10 pieces. No PPE.
Designed for SAFE collection of used blades and once completely filled final disposal. Always remember: Carelessly discarded blades represent an imminent risk of injury to one and all! Once FULL, screw the lid to the point where the red lock pin engages = the container is now SAFE for disposal. Loose packed item. Sized: 100 x 100 x 210 mm. No PPE.
Safety ashtray Elite Smokers Cease Fire - Cool black Dimensions: 965mm x 305mm
Flame retardant, anti-static hi-vis rain jacket, SIOPOR® Excell: 3-layer fabric: Dobby Ripstop Polyester fabric (& AST) + breathable FR PU + inherent FR knitting; ± 270 g/m², High performance lightweigth fabric, 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Comfortable, Supple, High tear resistance, Taped seams, Different linings/fleeces can be zipped in, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch & close fastening, 1 patched chest pocket, 2 patched pockets, 1 napoleon pocket, 2 loops for badges, Round inset sleeves, Elastic at end of sleeves with narrowing by touch & close fastening, Back length 85 cm (L), Unlined, 2 inside pockets. 14116 index 3, EN ISO 11611 class 1 A1/A2, EN 1149-5, EN 13034, EN 471 3.2., EN 343 3.3
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Crosstech (resistant against bacteria and chemicals). Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Sizes: 38-48.
ABEP filter for TR-600 and TR-800 motor unit. Protects against organic and inorganic gases, sulphur dioxide and particulates. Can be combined with filter cover TR-6100FC.
The HL400 Lite is a dispenser, completely transparent so you see at a glance when it needs to be refilled. All parts are 100% recyclable. Dispenses earplugs very quickly. Dispenser with 1 refills (303).
Tunic, polyester / cotton, 195 gr./m², height 80 cm and short sleeves. Available sizes: 0-6. Available colors: navy, wine and zinc.
Low shoe in waterresistant black nubuck leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/VIBRAM, SRC antislip. Whole insole. Sizes: 39-47.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating provides a good grip. 15 gg liner and extra reinforcement along the thumb and index finger. Cut protection level D, approved for contact heat up to 100°C for max.15 sec. Approved for ESD and food safe. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.D, EN407: X.1.X.X.X.X
Microflex Flame-retardant Hi-Vis rain trousers • Elasticated waist • High-frequency welded seams • Adjustable snap closure at the bottom of the legs • With RWS reflection • Wind and waterproof • Water column: 11 ,000 mm. Quality: 50% polyester / 50% polyurethane, 210 g / m². Available sizes: S-5XL. Available colors: Fluo yellow and fluo orange. Compliant with: EN ISO 14116 index 1, EN ISO 20471 class 2, EN1149-5, EN343.
Your ear defenders are always close to hand with the neck cord. The clothing clip reduces the chance of losing your ear defenders. C omfortable due to soft silicone material. Safe because the cord is released from the ear defenders if it catches on something. Easy to attach and remove from your ear defenders.
Flame retardant and antistatic long johns in 60% modacryll/38% Lyocell /2% polyester. Cool and comfortable material, regulates body temperature, elastic waistband. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Modern spectacle. Fitted with temple ends with non-slip components, headband and an extra comfortable frame which creates a close seal to protect from particle ingress and splashes. Top choice for working environments with dust exposure. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision Extreme coating. Frame: black/grey.
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff and palm reinforcement. Attractive, highly visible look with yellow and blue stripes. Available in: yellow/blue.
Low-cut safety shoe, type city model, lightweight and elegant, in high-sheen leather, fitted with a steel toecap and synthetic antip erforation midsole. Liner in leather tanned with natural oils. The shoe meets the ESD requirements and can therefore also be used in work areas where static charge build-up may not exceed 35 ohms. Outsole in rubber: slip resistant, high wear resistance and optimal heat resistance to 220°C. Sizes: 39-48.
Lightweight and very comfortable faceshield,450 x 250 mm. With individually adjustable headband and foreheadprotection. Polycarbonate visor: good impact resistance, heat resistant up to 130 degrees C.
T-shirt, 100% pre-shrunk ring spun cotton, 145 gr./m², single jersey, long sleeves, round collar. Available in: white, black, navy, red, naturel, royal blue, bottle green, ash grey, sport grey, dark grey.
Rain set, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams. Jacket: Fixed hood with drawstring, zip under storm flap with popper fastening, adjustable press stud fastening sleeves, 2 straight pockets. Pants: Elastic at the waist, 2 side pockets, adjustable press-stud closure at the bottom of the leg, 3M reflection. Complies with: EN 343, EN ISO 20471 class 2.
Dust filter protects against all types of particles (highly toxic dust, mist and smoke particles) Can be used in combination with the Sundström half and full face masks and motor units SR500/SR700. It's easy to combine this filter with gaz filters of this range. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
Automatically inflatable life jacket Hammar 300N: • Safety belt according to ISO 12401. • Stainless steel closures. • Stainless steel D-ring. • With harness. • tested according to ISO 12402-2.
Light elastic glove made of white Dacron fibres. These hollow fibres insulate perfectly, provide a lot of warmth and ensure rapid drainage of perspiration, which keeps body temperature in check. Pro Food Thermastat protects against cold and can be worn as a glove and lining. Suitable for operations with dry or chilled and frozen foods, meat, fish, ... in cold conditions.
Universal face shield with anti-fog feature (1,15 mm) in acetate (chemical resistant). With a chincup for extra chin protection. Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso. general industrial applications.
