BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Full peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: blue, red, green, black, navy blue.
Welding vest from flame retardant cotton (330g / m²) with 2 chest pockets, mobile phone pocket under flap, double stitched for extra strength.
The self-adhesive surface of the plaster is exposed when a plaster is removed from the dispenser. This makes it easier to apply. Content: 40self-adhesive fabric plasters (1022669) and 45 self-adhesive plastic plasters (1022670). The refills are stored in the dispenser and can only be removed through use of the special red key.
A1BE2K1/CO/NO/HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, toxic dust, vap our and smoke particles, nitrous gases and (to a limited extent) carbon monoxide. Only for use with full face masks with standard th reads. BE filter of class 2: for max. concentration of 0.5 %. AK filter of class 1: for max. concentration of 0.1%.
The HAZMAX S5 HRO ESD boot, in green, chemical resistant HAZMAX, constructed seamlessly, equippes a 200J steel toe cap and has an antiperforation sole in stainless steel, with an even better cut resistance than your conventional safety boot. Boot is adjustable in height. Lining in knitted nylon. Aside from strong chemical resistance against chemical vapours and materials, this boot is excellent for fire fighters. Its vulcanised sole is resistant to contact heat up to 300°C, fuel, oils and is cold-isolating. Comfortable, removable and washable inlay sole up to 40°C. Sizes : 35 - 50.
Composite rescue stick, used to rescue a victim (in the event of electrocution, blinding, etc.) during work on posts of the 1st, 2nd and 3rd categories. Allows the victim to be brought to safety by securing him at the waist. Length 1470mm. Weight 1.4 kg. Voltage 45 kV.
Semi-automatic safety knife Secunorm 380, suitable for right-handed/left-handed use and equipped with 110mm long blade with cutting depth max. 100mm. Suitable for use on thick surfaces with very high resistance. For example, thick PU foam. Replacement blades: 104 4289.
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Fitted with a breathable GORE-TEX liner. Outsole in VIBRAM rubber, SRC antislip, oil and carburant resistant. Removable, antistatic insole which covers the entire surface of the foot. Sizes: 38-47.
Fall-stop device 2 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
Flame Retardant Hi-Vis Raincoat in PU quality: • Fixed hood with drawstring • Concealed zipper under storm flap with press stud closure • Sleeves with adjustable snap button closure • Two straight pockets. Quality: 50% Polyester, 50% Polyurethane, 210 g/m². Available sizes: XS-5XL. Available colours: Fluo yellow and fluo orange. Complies with: EN 343 3:1, EN ISO 20471 Class 3, EN ISO 14116 and EN 1146-5.
Fall-protection harness with 2 attachment points: on the back and on the chest. Full D check anchor point. Leg and shoulder bands are easily adjustable. Chest and leg straps have quick-release buckles. Built-in drop indicator. Certified to use in combination with the life jackets Secumar Alpha and Golf.
Hi-vis ladies' polo for ambulance workers with contrasting collar, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes. Quality: 60/40 cotton / polyester piqué tricot 180 gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: XS-3XL. Conforms to: EN ISO 20471 Class 2.
Inherently flame retardant metal-free switch jacket with Velcro closure at the front for quick doffing. PPE category 4 (>40 cal/cm²). The jacket has fluorescent shoulder pads for extra visibility and is made of supple, wind and water resistant softshell material. Velcro closure at the front. Adjustable cuffs. Quality: Windtech FR 550, 550 g/m², wind and water resistant. Available sizes: S-L-2XL-4XL. Available colours: Navy/fluo yellow. Complies with: EN ISO 11612: A1+A2 B2 C2 F2, IEC 61482-2: CL.2, EN 1149-5 and EN 13034: type PB[6].
Low shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
Anatomically shaped, removable insole. This sole is anti-static and is specially designed for long standing postures. It combines an insole with a comfort layer that is in direct contact with the sole of the foot. No PPE.
Comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point. Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with quick release. Harness easy to put on. Built-in foot loops to prevent hanging trauma, fall indicator front and back.
Thermally insulating intermediate jacket made of quilted nylon, two pachted pockets, one inserted chest pocket,zip closure. This thermal liner with sleeves is worn separately abovethe work clothing or zipped into the Operator parka. Available in: black. Sizes: S - XXXL.
PVC/nitrile gloves with cotton lining for very good sweat absorption. These Fortex Pro gloves provide excellent resistance to chemicals, high tactility and a very good grip thanks to the roughened palm. Length: 35 cm.
Low shoe in black full grain leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35- 42.
Leather welding apron. With adjustable braces for a better fit, 1 large chest pocket and 1 front pocket with velcro. Kevlar® stitched seams. Available size: 1 size (91x58cm).
Comfortable and breathable trousers with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Flame retardant comfortable sweater with round neck and Hi-Vis accents on the sleeves. 20% recycled cotton. Knitted neck, cuffs and hem. With heat seal reflection. Entirely metal-free. Quality: Cantex Terry, 290 g / m². Available sizes: XXS-4XL. Available color: Fluo yellow / navy. Compliant with: EN ISO 11612: A1+A2 B1 C2 F2, IEC 61482-2: CL.1, EN 1149-5, ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
Highly absorbent sweatband dry-tec for safety helmets Concept, Vision Plus, Nexus and Spectrum. Available in: black.
Large particle pre-filter, for installation between dust filter and spark arrestor in Adflo motor unit. Prevents rapid clogging of g as and dust filters, which increases the service life. Very useful for work in very dusty environments.
Fire-resistent facial seal as spare spart of hoods M-series.
Splash suit in chemprotex 300 to be combined with Malina motor unit Clean Air (ordered separately). Suit with attached chemically resistant Kemblok gloves. The trousers have fixed socks and straight legs as a boot cover. Sizes: S - XXL.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
Electric insulating boot with epoxy coated steel 200J toecap. Foreseen with a rubber vulcanised outsole (fuel and oil resistant), antislip and tested against 35 KV, energy absorbing heel. Every boot is tested to 25 KV before leaving the factory. This boot is 100% waterresistant and adjustable in height. Easy to pull out through the 'hands free removal'. Needs to be retested every year. Resitance to hot contact 60 seconds 300°C. Liner in polyester, washable insole. Sizes: 35(uk3)/50(uk15).
Glove with nitrile coating on cotton / polyester liner. This glove provides protection for the whole arm. Length: 65 cm. Glove with high sensitivity and good grip.
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. Foreseen with a grey polycarbonate lens with a antivapor and anti scratch coating.
Safety glasses in clear PC with foam insert and headband. Metal-free frame in which branches are made of of two types of material. Contains an anti-scratch and anti-fog coating.
Vlamvertragende in antistatische fleece voering met lange mouwen. Comfortabel dan een warme fleecen voering. Daarnaast is de Troston ook vlamvertragend en antistatisch en kan gemakkelijk in verschillende jassen ingeritst worden. Kwaliteit: Dubbelzijdige fleece: 54% modacryl + 34.2% FR katoen + 10% nylon + 1.8% AST; ± 260 g / m². Beschikbare maten: S-3XL. Beschikbare kleuren: Marine. Conform: EN ISO 11612: 2015 / A1 B1 C2 F1, EN ISO 14116: 2015 / IND.3, EN 1149-5: 2018 en EN 14058.
High shoe in PU-coated leather, with a steel antiperforation sole and aluminium 200J toecap (amagnetic). Fitted with a breathable, abrasion resistant liner in polyamide. Outsole in PU/Rubber, SRC antislip, oil and carburant resistant. Removable, EVA insole with textile layer. Sizes: 35-50.
Chin strap made of webbing (woven textile). This model is supple and suitable for Centurion Spartan, 1100, 1125, Concept. Suitable f or: work at height, general industrial applications. Not separately certified as PPE.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the ma sk always retains its shape, even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalati on resistance and low levels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted wi th non-adjustable, elastic headbands. NPF: 10.
High black safety shoe S3 HRO with steel toecap, steel sole plate over-toe, made from full grain cowhide leather. With SympatexAirflow inner lining, air conditioning for your shoe, bacteria and virus repellent. A 100% polyester membrane that is waterproof from the outside, but lets sweat from the inside out through the lining layers; a breathable shoe. Complete insole: anti-bacteriological, moisture absorbing, breathable, washable, anti-static. Provided with a polished water-tongue. Light sole (rubber soles with polyurethane insole), high abrasion resistance, anti-static, anti-slip, oil, gasoline-acid resistant. With quality support insole. Fit XD.
Hi-vis rain jacket with detachable bodywarmer / Multifunctional 4 in 1 product / Can be used in all weather conditions / / 100% waterproof / Windproof / Highly breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Comfortable / Supple / High tear resistance / Taped seams / Outside: Straight collar / Foldaway hood in collar / Zip closure under flap with touch & close fastening / 2 inset pockets / 1 Napoleon pocket / Kimono sleeves / Elasticated wristband with narrowingby touch and close fastening / Drawstring in waist / Back length 85 cm (L) / Inside: Fixed mesh lining / Knitted wind cuffs in sleeves / 1 / Inside pocket with zip closure / Zipper in back lining for placing logos / Fabric: SIOPOR® Ultra: / 100% polyester / Fabric with / 100% PU coating; ± 195 g / m² Colour: 320 hi-vis yellow / green - 717 hi-vis red / grey - 065 hi-vis yellow / navy - 279 hi-vis orange / navy
Gloves with an innovative yarn structure, in nylon, with an optimalDyneema® content on the back and a polyurethane coating on the pa lm.Very high dexterity due to 18 gauge technique.The Hyflex providesexceptional comfort due to a lycra lining and the tricot cuff as well as a long service life due to the high abrasion resistance. Available in: grey. Sizes: 6 / 7 / 8 / 9 / 10 / 11, total length: 210-265 mm.
Flame retardant, anti-static hi-vis rain jacket, 100% polyester fabric with 100% FR PU coating + AST; ± 250 g/m², 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Very comfortable, Supple, High tear resistance, Taped seams, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch & close fastening, 2 patched pockets, 2 Loops for badges, Round inset sleeves, Sleeve narrowing by press studs, Back length 85 cm (L), Fixed flame retardant cotton lining, 2 Inside pockets, Zipper in back lining for placing logos. 13034, EN 343 3.3., EN 471 3.2.
Thicker than our average latex glove. The fingertips are thicker than most standard latex gloves for ultimate protection. The enhanced fingertips with relief allow for a sure, reliable grip in demanding work environments, while increasing mobility for more productivity. Regardless of whether the tasks to be performed are moderate or heavy-duty or whether you are working in a dry or wet environment, your hands will always stay safe and dry.
High shoe in waterresistant oiled leather, with a non metallic antiperforation sole and 200J toecap. Fitted with a breathable, abrasion resistant liner in Coolmax. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, ergonomic insole. Sizes: 35-49.
This sweater with a zipper collar is particularly shape and colorfast. The inside is roughened for extra comfort. Quality: 60% cotton / 40% polyester, American fleece. Available colors: Red, royal blue, navy, anthracite, black, lime. Available sizes: XS - 7XL.
Hi-vis offshore trousers Ambok with arc protection: Front closure with zip; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 1 ruler pocket with flap; Elasticated waist; Knee pockets; Waistband with loops for belt; Double stiched (2x2) flame retardant reflective striping (70mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available sizes: 44 - 64, 48S-58S and 46L-56L. Available colors: Fluo yellow/navy.
Conical earplug made of polyurethane foam. The pressure is evenly distributed in the ear, resulting in optimal comfort. In line with : EN 342-2 standards (SNR 36).
Black waders in PVC, fitted with a steel 200J toecap and steelantiperforation midsole. Outsole from PVC Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Waders in PVC, 100% waterproof. Sizes: 39-47.
High shoe, in rough environments, weather or no weather, on construction sites and slippery floors - the ANTONIO XXSG GTX Mid ESD S3S WR CI is at home wherever it can become critical. The EXTRAGUARD® upper material offers optimal protection against external influences thanks to its robust construction and water-repellent properties For a secure grip on a wide variety of surfaces, the PU/PU WELLMAXX SAFETY GRIP sole with certified anti-slip resistance SR. And the PU creep nose in the toe area extends the life of the boot. Waterproof, oil- and fuel-resistant, the safety boot defies even the most adverse conditions. Thanks to Laddergrip in the profile of the sole, it is also suitable for safe use on ladders. BASF's Infinergy® sole core absorbs shocks and vibrations and ensures comfortable wear throughout the working day. ESD capability and cold insulation complete this innovative foot protection. Maten: 36-48. Conform: EN ISO 20345:2022 S3S WR/FO/SR/SC/ LG/CI, type B
Comfortable goggles with large field of vision and frame in PVC. Fits perfectly over prescription glasses. With adjustable headband, ventilated. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. EN 166/170 2-1.2.
Folding banded earplugs with two replaceable foam earplugs that sit at the top of the ear canal. Bilsom Percap protects against universal noise and does not contain any metal components.
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF-free.
The new HAZMAX S5 FPA HRO boot, in green, chemical resistant HAZMAX, constructed seamlessly, equippes a 200J steel toe cap and has an antiperforation sole in stainless steel, with an even better cut resistance than your conventional safety boot. Boot is adjustable in height. Lining in knitted nylon. Aside from strong chemical resistance against chemical vapours and materials, this boot is excellent for fire fighters. Its vulcanised sole is resistant to contact heat up to 300°C, fuel, oils and is cold-isolating. Comfortable, removable and washable inlay sole up to 40°C. Sizes : 36 - 48.
Duolens glasses with modern fashion-look. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with twist temple technology for a perfect and non-slip fit. Polycarbonate lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to filter material that is added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. Frame: black/green.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Short peak (50mm). With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-64cm.
Bicolor Hi-vis t-shirt comfort S280: Moisture-wicking and breathable material; Reflective striping; Taped neck seams; breast pocket; UPF 40+ fabric blocks 98% of UV radiation. Quality: 55% Cotton, 45% Polyester, 175g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluorescent orange/navy. Complies with: EN ISO 20471 class 2.
Low shoe in high quality waterresistant bovin leather with an Air Toe aluminium toecap and non metalic antiperforation outsole Safe & Flex Zero+. Outsole in PU/PU with perfect grip and selfcleaning traces, lightweight, oiliresistant and antistatic. Energy absorbing heelpart. Liner in 3D material, with moisture regulating cell structure. Removable and ergonomicaly formed insole in foam with memory effect, made out of Elastopan by BASF. Sizes: 35-48.
Discover the JALWIZARD model, assembled in France and equipped with BASF's innovative E-TPU Infinergy® insole. This material provides more than 55% energy recovery during walking and offers an exceptional feeling of comfort thanks to the cushioning of the sole. Insole: For better cushioning. Insert anti-abrasion: Excellent support for the foot in the shoe. Nubuck leather: Hydrophobic, supple and breathable. Lining: High breathability and quick-drying. Infinergy® sole: >55% energy recovery. Benefits: Saves 1 hour of energy per day to stay in shape. Reduces fatigue in people who walk a lot. Offers unrivalled comfort thanks to the cushioned sole. Reduces the risk of TMS in the lower limbs. Sizes: 35-48 PU rise: For increased durability. EN ISO 20345:2022
Blue belt in textiles with metal slide buckle. 100 to 150 cm, width 3 cm. No PPE.
The latex coated glove with steel, fiberglass, Kevlar lining and extra long knit cuff is the practical solution for a safe way to manipulate glass, metal and plastic. She is distinguished by an exceptional cut resistance, excellent overall mechanical performance and superior comfort. In wet or dry conditions, this glove an excellent grip thanks to the coating on the palm of natural rubber. The PowerFlex ® 80-658 is a unique glove on a highly efficient way to adequately protect combines with natural dexterity.
Polar Fleece 300 gsm, 100 % polyester,300 gsm, short-cropped and combed anti-pilling fleece, set-in sleeves, tone-on-tone full zip, pockets with zip, adjustable hem with elasticated cord pull and stoppers, easy to decorate.
Refill for first aid panel: Refill pack of 6444 textile plasters. 1 Refill pack contains 6 X 40 plasters.
The Mizar is a TÜV-approved safety knife with automatic blade retraction that is excellent for cutting many different packaging materials, especially cardboard and foil. A high-quality plastic construction in a handy ergonomic design is the key to working efficiently. This means fatigue-free work for the user and increased productivity for the company. With its unique "3 in 1" slider, the knife can be quickly and easily unlocked for cutting when needed, securely locked for transport, and easily opened for blade replacement. With its sqeeze lever grip, both right-handed and left-handed users can cut equally well. The blade can be changed without tools, simply, quickly and safely. No PPE. Blades: 1016008
Firefighting jacket in NOMEX® STRIKE, 220g/m², SOFIGUARD treatment with PU FR membrane (145g/m²) and aramid lining (250g/m²). High separate collar, patched radio pocket, microphone loop, zip closure under flap with velcro closure, cuffs with thumbloops, 2 patched pockets with flap and hole loops, torch holder, coated KEVLAR® reinforcements on shoulders and elbows, elongated back, bottom hem finished to prevent water rising, extra internal thermal reinforcements on shoulders and arms. Available colours: navy. Available sizes: S-4XL.
100 individually packaged silicone-free cleaning wipes in dispenser. Suitable for all lenses. No PPE.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 2500 volts, operating voltage of 500 volts. Length 36 cm, Sizes: 6-12.
- Dexterity and robustness - Cold protection and heat contact resistance - Latex coating on the palm with excellent grip - Respects the natural shape of the hand - 10 gauge - Sizes: 7(S) - 11(XXL) - EN388:2016 3.X.4.2.B - EN511:2006 X.1.X - EN407:2004 X.2.X.X.X.X
Trousers in easycare material of polyester / cotton that ensures good shape and color retention: • spacious front pockets; • two back pockets with flap; • leg pocket with flap and ruler pocket; • the sizes C42-C64 can be extended by 5 cm. Available sizes: C42-C64, D84-D120. Available colors: fluorescent yellow / navy, fluorescent orange / black and fluorescent yellow / black. Compliant with: EN ISO 20471 Class 1.
Flame retardant work jacket with a thin lining, making it compliant with arc IEC61482-2 class 2. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Tunnel cord in the waist. Adjustable cuffs. Reflection on the shoulders and sleeves. Entirely metal-free. Item is produced to order. The delivery time is approximately 5 extra working days. Quality: 811 Tera TX, 260 g / m². Available colors: Yellow / navy. Available sizes: XS-4XL. Compliant with: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.2 *, EN 1149-5, EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB 6. * The back of the jacket is unlined and complies with IEC 61482-2 CL.1, Arc Rating: 9.5 cal / cm². The front has an art rating of 20.20 cal / cm².
