BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Seemles knitted nylon-spandex gloves (18 gauge) with insulating double layer nitrile foam on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Seemles knitted nylon-spandex gloves (18 gauge) with 3/4 insulating double layer nitrile foam on the palm. Heat resistant up to 100°C contact heat. Sizes: 7-11.
Safety helmet with integrated eye protection made of ABS with grey reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated eye protection made of ABS with red reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Safety helmet with integrated eye protection made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Arc-Flash earflap for V-GARD 900.
The inner cover plate is designed to protect the inside surface of the filter from spark and spatter. Can be used to increase +2 dark shades of the welding filter.
Replacement inside protection plates with plus 1 shade leve
Silver front against heat for Speedglas 9002.
Heavy duty safe bucket with 6 built in connection points. Cotton duck canvas suitable for harsh work environments. Carabiner and hoistring strap, puncture resistant plating sewn into the base of the bucket. No PPE.
A1P3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C , toxic dust, vapour and smoke particles.
Warm, insulating gloves with RIPEL™ technology provide fully water-proof gloves. Leading dexterity among liquid-proof cold weather gloves. PVC-foam coating stays flexible down to -25°C, food approved.
Blower caps to protect the PAPR from dust and contaminent entry when no filters are attached.
Disposable cover for motorunit Proflow.No PPE.
Chest protection for combat training. Sizes: M/L and L/XL.
The C50 protective mask provides maximum operational flexibility to counter mulitple threat scenarios, including chemical, nuclear and radiological agents. It offers high protection outstanding field of vision, and superior comfort. NOT for industrial or civil use.
Clean water tank 1000L.
Hose 1m to connect 8 bar regulator with MFC inflatable shower or tent.
Low, black shoe made out of full grain leather. Special antislip sole made out of rubber. Removable insole made out of PU for higher comfort. Sizes: 35-42. No PPE.
Cleanspace combined filter A1P3. Suitable for protection against airborne particulate (dust, mists and fumes), organic gases or vapours (boiling point >65°C). Weight: 220g. In line with EN12942
Bitter test liquid (low concentration)for performing fit test. Content: 55 ml.
Tropic glove in synthetic leather with cotton back and velcro closure. Sizes: 7-11.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW Clip4 Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Synthetic leather glove, Unlined, 0,7 mm, Microthan®+, Diamond grip pattern, Nylon, Cat. II, Black, grey, yellow, Chrome free, Reinforced seams, Velcro®, for assembly work . Conform EN 388:2016: 2.1.2.1.X
- All sizes comply with EN ISO 20 471 - Suspender trousers with raised back - Suspender trousers 2 layers + fully lined - Wide loom band - Closing the sides by means of invisible push buttons - Fly with zipper - 2 side pockets on the front with +/- vertical insertion - 1 stitched back pocket with flap closing by means of velcro's (H14xB16cm) - Bite bag with flap closing by means of velcro's - Closing the meter pocket with the flap using velcro - 2 reflection bands per pipe - 1 reflection band on waist front and back - 2 knee pockets with flap closing through velcro's Quality: PES 100% + GORE PYRAD®. Available colors: Fluo yellow / navy. Available sizes: BE 40 - BE 60.
Velcro for speedglas 9100FX/9100FX AIR hoods. No PPE.
The hooded ladies sweater has two pockets. These pockets can be closed with a zipper. The inside of the sweater is gebrusht several times for extra comfort and warmth. The advantage of the hooded sweater is that it provides additional protection through the hood on cold days. Quality: 80% cotton / 20% Polyester. Available sizes: XS-XL. Available colors: Navy, Black, Gray, Bordeaux.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The 3/4 nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex Certified.
Seamless insulate lined glove with water repellent natural rubber latex on the full glove, with a dual rubber latex coating with rough finishes surface on the palm. The dual coating provides high abrasion resistance and longer usage. Designed to protect at temperatures down to -30°C for short or intermittent contact and to contact temperature up to 250°C for 15 seconds. Anatomical hand shape design and high visibility orange color. Sizes: 7(M)-10(XXL).
Testgas HCN 10PPM cylinder 34L. Only for use in combination with pressure reducer.
Testgas H2S 25PPM aluminium cylinder 34L in N2.
The Squids® Hand Tool Slips™ allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips™ are compatible on tools with diameters ranging from 0.05" (1.3mm) to ½" (12.5mm). Features: Approved to the ANSI/ISEA 121-2018 standard; Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply; Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue; ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions; Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects.
P2 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.
Classic overalls with collar, 1 stuffed chest pocket with flap, 2 side pockets, closure by means of dived press studs. Quality: Overall in 65% polyester 35% cotton, 210 gr./m². Available colors: navy, royal blue, red, white, bottle green and graphite gray. Available sizes: S-5XL and lengths.
Davit arm with a range of 720 mm, high capacity. Short and long reach davit arm high capacity can only have 1 davit mast extension. Complete davit (mast extension + davit arm) can be used on any fixed or portable davit base high capacity. Authorised SRL and winch can be mounted front or back whether on the universal lower mast or davit mas extension. Can be used for persons as well as loads with a maximum of 205 kg with portable bases, or 340 kg with fixed bases. For fall arrest applications: 2 users (max 140kg max each), for rescue applications: 1 user (max 140 kg max.).
U-shaped base for Davit arm. Width adjustable from 1,2m - 1,9m.
5-part large Davit arm system, high capacity, suitable for confined spaces. Includes adapter for mounting Lier Advanced. May be used for both persons and, to a limited extent, for loads. Base width: 1927-2613mm, Davit arm height: 2223-2805mm. Capacity: fall arrest 2 users (max 140 kg each), rescue: 1 user (max 140 kg), max load weight: 205 kg. Complies with: EN3795 type B, EN1496 class B
Davit arm with boom. Davitarm and base system includes adjustable upper mast, lightweight lower mast and 3-piece lightweight base. Includes mounting bracket for a winch. Order winch and SRL separately. Boom has a universal anchor point for fall-blocks or safety line. In combination with the adapters, fall-protection blocks with or without winch or permanent winches, can also be mounted to the davit. Boom has two roller wheels to guide cable of fall-protection block or winch. The boom is extendible in different positions. Height with boom: max. 2542 mm.
The 3M™ Peltor™ LiteCom is a high-performance hearing protector with a built-in communication radio for cable free short-range communication with other LiteCom headsets and portable two-way radios programmed on the same frequency. Bluetooth® Multipoint connectivity for connecting mobile devices. The noise cancelling speech microphone with VOX functionality enables you to communicate hands free in noisy environments. SNR: 32 dB. Possibility of programming your own frequencies (not included in the price). In accordance with: EN 352-6
Bodytrousers in 65% cotton / 35% polyester, concealed zip, 2 side pockets, breast pocket with flap, 2 back pockets, ruler pocket, Cordura® reinforcements, adjustable waistband, hammer loop, D-ring, reflective details, Cordura® knee pockets, adjustable shoulder straps with Velcro. Available sizes: 44-66. Available colors: Navy, gray and black / gray.
Floor foot for Davit arm to be secured to concrete structures. The flat design ensures that there is no danger of stumbling. When used together with davit arm, complies to EN795 type A, EN1496 Class B
No PPE.
Adaptor to connect short davit arm with old fixed base No PPE.
Counterweight base high capacity with cart, as base for davit arm.
This brace gives a light support and unloading of the patellar tendon. Sizes: Universal. Colors: Black.
Cleanspace combined filter ABEK1P3 for protection against airborne particulate (dust, mists, and fumes), organic, inorganic gases or vapours, solvents, (boiling point >65°C). Weight: 200g In line with EN12942
