BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Made from high-quality environmentally friendly silicates and provided with a mineral-based coating to minimize fraying and strengthen the fabric. Suitable for horizontal use at high temperatures. Short-term temperature resistance up to 1300°C.
Soft and form-retaining Hi-Vis T-Shirt in tricot with a cotton finish on the inside for comfort. T-Shirt short sleeves with heat seal reflection. Quality: 113: 55% polyester / 45% cotton, 200 g/m². Available colours: Fluo yellow/navy and fluorescent orange/navy. Available sizes: XXS-4XL. Complies with: EN ISO 20471 class 1-2.
Flame-retardant and anti-static work jacket 6035 81 with a thin lining. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Completely metal-free. Quality: Tera TX NON-METAL, 260 g/m². Available sizes: XS-4XL. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E1 F1, EN 1149-5, EN ISO 11611 klasse 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 8,1 cal/cm², EBT: 8,7 cal/cm².
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in Gore-Tex. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Gas filter ABE1 for use with Sundström face masks , protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic, acidic gasses, vapours and ammonium.
Ceramic replacement blade, packed per 2 pieces. Rust and acid resistant with wide double cutting edge with rounded tips. No PPE.
Welding cap with elastic back. Quality: Cantex 1210, 350 g/m².
The uvex Spiderneck neck support improves the weight distribution of the helmet due to the large contact area, which increases wearing comfort. In addition, mounting is very easy by screwing via the rotary knob. No PPE.
Suitable for opening heavy boxes and cutting thick cardboard. Extra long blade (28mm). Replacement blade: 1058459.
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Seams made out of Kevlar. Fitted with a breathable liner in 3D-mesh. Outsole in PU/E-TPU/VIBRAM rubber, SRC antislip, oil and carburant resistant. SOFT insole in BASF Dynamic polyurethane, cushions pressure points, improves the distribution of weight and heel shock absorption. Anatomical, perforated. Sizes: 35-48.
The Chill-Its 6670CT Evaporative Cooling Hard Hat Neck Shade straps into hard hats to deliver four hours of cooling relief while also shading the neck from sun damage. The lightweight shade features advanced PVA cooling technology for instant cooling without bulk or slime, with a wide panel that extends down for complete back-of-neck-coverage. This hard hat neck shade fits most hard hats and safety helmets, easily and securely attaching to the suspension with two hook <(>&<)> loop straps.
The Komodo is the hi-vis version of our Jasper ECO jacket. Thanks to the use of the Sio-SafeTM Essential Eco fabric, we have switched to environmentally friendly TencelTM Lyocell and Repreve© recycled polyester instead of the regular cotton and polyester. Although the FR-treated fabric is made with 50% recycled material, the jacket offers the same high-quality protection. It is soft, comfortable and breathable. In addition, this jacket is designed for disassembly, which means that it can be easily taken apart after use. Standards: EN 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5, EN 13034 and EN ISO 20471 class 3. Available sizes: 44R - 64R Available colours: fluo yellow-navy
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. Touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. DMF free, with impact protection on the back of the hand. Sizes 6 - 12.
Chin strap 2-point for helmet G22C/D and G3000.
Perforated, absorbent black sweatband made of nylon for Centurion safety helmets Reflex, 1125 and Vulcan. separately certified as PPE.
Face shield in clear polycarbonate, length 225 mm. Is compatible with S89 (1000806) and S89SR (1048119). For use in combination with helmet holder S54B/S54CE (1000790/1000789) and adapter 3711/S565 (100 1188/1001191) for mounting on Centurion safety helmets. Bracket S54, which you can see on the photo isn't included. Marking: 1 B 9 3.
ABEK2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Set with Skipper unit with red/white barrier tape of 9m, including wall bracket and receiver.
Shoe polishing set black, consisting of shoe cream, brush, polishing cloth and cleaning instructions.
Ear muff for helmet with 30mm adapter. The larger cup openings are desgined to fit most earsizes. SNR = 29dB.
Flame retardant Hi-Vis work trousers in Cantex Weld at the front and Cantex Stretch at the back. Cantex Stretch gives the work trousers flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter. The pants have nail pockets. Quality: Cantex Stretch, 365 g/m². Available sizes: 44-64, 146-156, 84-120. Available colours: Fluo yellow/navy. Complies with: EN ISO 11612 A1.A2.B1.C1.F1, EN 61482-2 (ELIM: 12.0 cal/cm² EBT: 16.0 cal/cm²), EN 1149-5 and EN ISO 20471 class 1.
Safety helmet with micro peak and integrated arc visor (class 2), made of strong ABS for improved low temperature (-40°) and side impact protection. The transparent, gray face shield provides improved optical properties. With a very high VLT (Visible Light Transmission) value of 82%, colors are much more distinguishable. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
High shoe in full grain leather, with a steel antiperforation sole and steel 200J toecap. BOA closing system. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 34-42.
Unisex T-shirt, regular fit with a crew neck. Made from 100% OCS certified organic cotton.
This transparent mask for mouth-to-mouth resuscitation allows a goodviewof the victim. Packed in a hard box.
Flexible, chemically resistant PU sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions: 50 x 50 cm. Suitable for sewers with dimensions 30x30cm. Comes in a handy storage box.
Mini-Cable Locking System in Mini Cable Locking System. Locks both hand wheel taps and interrupters. Not PPE.
Earplug in TPE with soft strips for an easy fit in the ear canal. Equipped with a cord and handles to easily remove earplugs.
Model mounted eye and face wash features the medically acclaimed AXION MSR eyewash and eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE. not damaged by scuffing from pallets. Available in different colours and sizes. Not PPE.
Replacement power adaptor for GasAlert-devices.
Safety helmet made of ABS, fitted with a 4-point textile suspension with slip adjustment (54-62cm) and synthetic sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.
Safety signs - wear protective clothing. Diameter: 200mm. Colour: White on blue.
Inox scissors (15cm) for cutting fabric or paper. Does not cut in skin.
Dust mask, class P2, for harmful dust and ozon. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against ozon 10 x MAC value thanks to active carbon layer. NPF: 10.
Pre-rolled tubular finger bandages.
Chlorinated (provides more comfort and is less sticky) with texture on the fingertips. Biodegradable. Size XXL: 90 pieces per dispenser.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 10,000 volts, operating voltage of 7500 volts. Length 41 cm, Sizes: 7-12.
Detectable beard mask in polypropylene with metal strip. Perfect for use in food or agro industry. Available colour: blue.
Overshoe in breathable upper material in PP (white). CPE sole in hardwearing, strong and waterproof material. No seam at the bottom of the sole, making these overshoes more comfortable and have a longer life. Dimensions: 42 x 16.5cm. Available size: XL (Universal) Available colors: white and blue. Suitable for work in the food sector and hospitals. No PPE.
High shoe in black microfiber, with a synthetic 200J toecap. Fitted with a synthetic liner. Outsole in PU/PU. Sizes: 40-48.
Softshell jacket for women in light stretch material. Two-tone front zip and side pockets. Adaptable sleeves with velcro closure and drawstrings at the hem at the bottom. Zippullers in contrasting color. Quality: 96% polyester, 4% elastane, brushed inside. Available sizes: XS - 2XL. Available colors: black, white, navy, dark gray, green, blue and red.
Foot loop that can be deployed after a fall to remove pressure from the groin and avoid suspension trauma after falling. Flam retardant version. No PPE.
To compensate for the higher weight and especially the higher heat accumulation associated with a higher protection class 3, these BasePro chainsaw trousers are equipped with a ventilating mesh at the back of the legs. Available sizes: XS-2XL. Available colours: Grey/black. Complies with: EN 381-5 : 1995 / Class 3 - 28 m/s design A, EN ISO 13688:2013
A set of high intensity, highly reflective accessory stickers, for the Nexus range of safety helmets. Helps to ensure maximum visibility of workers in low light level environments. 7 different stickers provides coverage on front, side, rear and top of the helmet.
Salvequick Textile Finger Bandage are extra long textile plasters, soft and flexible. Easy to wind around a finger and for more hard-to-reach places. Dimensions: 120 x 20 mm.
The 3M ™ PELTOR ™ WS ™ ProTac XPI Bluetooth® headset features level-dependent microphones, which ensure that ambient sounds are audi ble and communication is possible in noisy environments. Still protected against constant noise or spikes of noise. If the environment awareness function is low or even disabled, you can use the push-to-listen (PTL) if you suddenly find yourself in a situation where you need to be aware of your environment. A simple push of a button resets the level of ambient noise to your preferred setting. Bluetooth multipoint connectivity for simultaneous seamless connection with two external Bluetooth devices. Yellow (high-viz) color that provides extra visibility in harsh conditions. IP68-classified microphone with ambient noise suppression, optimized for environments with harmful noise levels. Use the FLX2 accessory system for an additional, simple and reliable cable connection for the most common 2-way radios. A robust PTT on the headset, for radio communication.
Hi-viz, BasePro chainsaw trousers. The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work: Front fly with zip closure - closing by 1 button 2 inset pockets 1 patched pocket with zipper on the back 1 patched pocked for measuring equipment and fixation of spark plug spanner Elasticated waist with loops for belt and loops for velcro braces (ref. 5SD4) Back bib with loops for braces ref. 5SD4 Triple-needle stitching on the back seam to the inside leg. Quality: 65% PES/35% Cotton. Available sizes: XS-4XL. Available colours: FLuo yellow/black and fluo orange/black.
Aquafloat superior jacket 1MMV: Fully waterproof outer fabric + taped seams; Crutch strap for wearer's safety; Anti-flushing straps at arms; Front zip closure under double stormflap with touch <(>&<)> close fastening; 2 patched chest pockets with water repellent flaps + marine grade whistle; 1 Napoleon pocket under storm flap; 2 lower hip pockets with fleece handwarmer; Adjustable waist belt and elasticated back waist; Elasticated drawcord with toggles; Retro-reflective tape on hood, upper arms, wrists Inner adjustable neoprene wrist seals. Buoyancy: 54N (size L). Available sizes: S-3XL. Available colors: Navy/red.
The Croston jacket with its heavy canvas construction is highly suitable for harsh working conditions as it also has a good abrasion resistance: Straight collar; Foldaway hood in collar; Zip closure under flap with touch <(>&<)> close fastening; 1 patched chest pocket; 2 inset pockets with flap; 1 pen pocket; Round inset sleeves; Elasticated wristband with narrowing by touch and close fastening; Elasticated waist and narrowing by press studs at the sides of the waist; Elongated back tail; Detachable lining. Quality: 100 % polyester fabric with 100 % PU laminate; ± 260 g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluo orange/navy.
Flamirins is an isotonic solution for cleaning wounds. (250ml) Indications: Promotes wound healing by removing necrosis Cleans the w ound mechanically Moisturises the wound Neutralises disinfectants Removes adhered compresses Content: 250ml
The BHV first aid kit large Luxe is a very extensive first aid kit (including wall holder). The shelf life of the products is on average 4 years. In the BHV First aid kit large Luxe, a color guide can be found that identifies various injuries. This first aid kit contains a basis for the most common first aid procedures. Size: 32 cm x 22 cm x 13 cm. The refill is available separately as 1050702.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
The 100 Series offers a popular sporty lens design, adding a fresh look to the SecureFit family of safety glasses. These lightweight safety glasses feature 3M’s innovative temple design with slotted ribs that provide comfortable pressure equalization, allowing the temples to flex and self-adjust to the size of the wearer’s head. The design of these safety glasses applies pressure to the less sensitive back of the head instead of the temples, achieving a comfortable fit even during rapid head movement. In addition, SecureFit 100 Series flat and flexible temple design combines well with 3M™ Protective Earmuffs.
Fleece jacket with: • extra reinforcement on the shoulders, elbows and inside collar; • two side pockets with zip; • long 2-way zip with chin guard; • extended back; • cuffs with thumb loop. Quality: 100% polyester, 320 gr / m². Available sizes: XS-4XL. Available colors: red, navy, gray and black.
Long sleeve polo shirt 203003: Reflective striping, inherent flame retardant, polo collar, flame retardant, anti-static, piqué, bicolor. Quality: 60% Modacrylic / 39% Cotton / 1% Other, 200 g/m². Available colours: Fluo yellow/navy. Available sizes: XS-5XL Complies with: EN 1149-5:2008, EN ISO 11612:2015, EN ISO 13688, EN ISO 20471:2013 Class 2.
Automatic safety knife for right-handed and left-handed use Stainles Steel blade and handle without paint. Metal detectable, for use in food and pharma industry. Handy Format no tools needed to replace the blade
Bicolor sweat jacket with contrasting zip on the front and on the side pockets. Contrasting neck tape. 2x2 rib with elastane at the bottom hem and at the cuffs. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Zipper pullers in contrast color. These can be replaced by one of the other available colors if desired. Oeko-Tex 100 certified. Quality: 50% organic cotton, 50% recycled polyester, 280g/m². Available sizes: S-5XL. Available colors: Blue/Navy, Navy/Blue, Black/Orange, Black/Red, Black/Grey and Gray/Black.
Safety glasses in dark PC with foam insert and headband. Metal-free frame in which branches are made of of two types of material. Contains an anti-scratch and anti-fog coating.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a 3/4 liquid-tight coating. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Low shoe in microfiber, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-49.
Safety helmet made out of ABS with integrated spectacle. Has a 6-point textile cradle (53-64cm). Available in: white, white/smoke.
Canvas protective bag made of 100% cotton for the storage of insulating gloves for electricians. Size: 14 inches.
Spats manufactured in brown and grey leather with hook and loop closure a red fabric strap at the bottom. Length: 15 cm.
The HSYA is a fully automatic AED that can be supplied in one language or in a combination of multiple languages (maximum 4).
Includes Supravision Extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
