BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Hat, 100% cotton, 350 gsm, 6-panels, Eyelets, Tonal button adjustable clip fastening, Low stylish profile.
configuratie op aanvraag/configuration sur demande
Glove made of cut-resistant HDPE material with PU coating. Very finger sensitive. Sizes: 6-11.
Outer protective lens, extra scratch resistant, for welding helmet 9100. Not separately approved as PPE.
Safety line, 1.5 metre length, consisting of kernmantle rope with integrated shock absorber. Fitted with standard carabiner and 1 ca rabiner hook with a 65 mm gate opening. Serves as connection between anchor point and harness.
ABEK1HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 1 gas filter: for max. concentration of 0.1%.
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-1-63 cm) and highly absorbent hydro-flock sweatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. Supplied with mesh visor (S59) and Baltic earmuffs. Colour: orange.
Metal detectable safety knife with concealed blade, especially designed for cutting film and plastic strpping band. The concealed blade and rounded nose reliably protects you and your products. It has perfect ergonomics and the blade change is made very easy.No PPE.
Atex Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
Flame retardant and antistatic rain trousers Witham with elastic waist and ankle narrowing by means of press studs. Quality: 100% FR Polyester knit with FR PU coating + AST; ± 240 g / m². Available sizes: S-3XL. Available colors: Marine. Compliant with: EN ISO 14116: 2008 / Index 1 / 5H / 40, EN 343: 2003 + A1: 2007 Class 3-1 and EN 1149-5: 2008.
Compact personal alarm for lone workers and company first responders. The personal alarm can be used to alarm and to receive alarm messages. You can alarm by pressing the emergency button, by pulling the neck cord, via the man down function when there is no movement or lying position and via the timer function. The device has a talk-listen connection so that communication can also be done via speech. The TWIG Neo features GPS/GNSS for outdoor location determination. The personal alarm is often used by company first responders, deposit service technicians and healthcare professionals. The device can be worn around the neck and on the belt. The TWIG Neo comes with belt clip, charger and charging cable.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
High shoe in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Winch closing system. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SR antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49. with: EN ISO 20345 S3S FO SR ESD.
Overshoe, Tyvek ®, elastic at ankles, length 40 cm, one size.
The Axion drench shower nozzle uses the latest hydrodynamic principles to spin inlet water and break it into smaller, discrete droplets. This spinning and atomization action mitigates strong physical pressure driving water to the outer rim, making distribution equal across entire footprint of the flow.
Low shoe in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 39-48.
S3S boot: 100% metal-free, specifically for outdoor and construction work, stable and good grip.
Red First aid pouch with basic first aid equipment for on-the-go. Content: quick bandage 7x10cm, wound quick bandage, adhesive plaster, wound plaster, Cambric bandage, elastic hydrophilic dressing, gauze pads 5/5cm, dressing wadding, splinter tweezers, pocket scissors, disinfectant wipes, safety pins, Burnshield blots. Dimensions: 22 x 14 cm.
Cellulose acetate shield, anti-fog coating, clear, length 225 mm. For use in combination with helmet holder S54B (1000790)/S54P (1023799) and adapter 3711 (1001188)/P3EV/2 (1001189) for mounting on Centurion safety helmets. Marking: EN 166 1 F 9 3 and EN 170 2-1.2.
Knee protector, 100% polyethyleen, felt, height: 255mm, Width: 220mm.
Screen seal as spare spart of hoods M-106, M-107, M-306, M-307, M-406, M-407. No PPE.
Hard plastic (grivory) safety knife with automatic blade retraction system. Designed for all normal cutting jobs, especially box-slitting. The ergonomically squeeze lever - made out of aluminium and a soft plastic component - provides comfortable and non-slip handling. For use by right- and lefthanders. Easy blade change: no extra tools required. With 2-edge/4-point blade for extra economy. No PPE. Blades: 1016658
Cover for TR-600 can be combined with filter TR-6710E.
Sportive spectacles in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside and easy to clean.
Offers protection against electric arcs (class 2). Very lichtweight, flame retardant and antistatic rain jacket in 100% polyester with a highly breathable ePTFE membrane (Gore Pyrad™ technology)(215g/m²). Flameretardant lining in 50% aramid/50% viscose (115g/m²). Zip closure under flap with velcro, 2 front pockets with flap, chest pocket with flap, adjustable cuffs through velcro straps, elongated back, 2 loops for badge, vertical and horizontal reflective striping. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Safety helmet with integrated eye protection made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Twin pack dust filter protects against highly toxic dust, mist and smoke particles. Can be used in combination with the Adflo motor unit. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
Dark grey hearing protector with HiViz green element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
The Multinorm Fleece Jacket is made from 60% modacrylic, 39% combed cotton and 1% carbon with a fabric weight of 280 g / m2. This product is EN ISO 11612 (protection against heat and flame) and EN 1149 (protection against electrostatic properties) certified. The fleece jacket is ideal to wear in cold and bad weather conditions. Available sizes: XS-5XL. Available colors: Marine. Compliant with: EN ISO 14116, EN 1149-5: 2008 and EN 14058.
Skipper unit with 9m long black/yellow safety tape. Can be attached to traffic cones, Skipper cones and Skipper's 1m safety posts. You can also attach Skipper directly to walls and magnetic surfaces using a support bracket. The Skipper range includes useful accessories such as a sign holder, safety light and receiver clips. The Skipper unit is robust and reliable thanks to the high quality materials and fabric tape. Suitable for outdoor use.
High shoe in Putek® Plus textile, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/E-TPU Infinergy® extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
White clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 35-42.
Hi-vis trousers Belenos 12433 with: 2 front pockets; 2 back pockets with flaps; 1 thigh pocket; 1 ruler pocket; Knee pad pockets Cordura. Stretch elements M-move Industrial laundry Quality: Recycled polyester / LYOCELL 65% 35%. Available sizes: 42-66 BE. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 class 1.
Low shoe in microfibre/textile with a non metallic antiperforation sole and steel 200J toecap. BOA closing system. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
High shoe in waterrepellant full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breat hable, abrasion resistant 3D liner in textile. UTURN closing system. Outsole in PU/Vibram, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Softshell vest without sleeves: • two zipped side pockets; • breast pocket with zip; • two inner pockets; • hidden button band with chin guard at the top; • adjustable waist. Including Aviko logo on the left chest (50cm²). Quality: 96% Polyester, 4% Spandex. Available sizes: XS - 5XL. Available colors: Navy.
Delineation tape in yellow/black with a length of 100M, with of 80mm.
Air hood with safety helmet PC/polyester with hinged visor and fire resisteant Nomex full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 200 with compressed air, 500 with Jupiter or Versaflo. processes involving chemical risks.
The INUTEQ-DRY® Bodycool Smart X is a high-quality cooling vest based on evaporative cooling. Simple to activate by filling with max. 500ml clean water. The cooling effect can last from 8 hours to up to 3 days, depending on the ambient temperature, humidity and amount of airflow on the body. Available sizes: XS-XXL Available colours: black, gray and yellow
The INUTEQ-DRY® Bodycool Smart X is a high-quality cooling vest based on evaporative cooling. Simple to activate by filling with max. 500ml clean water and wring out water. The cooling effect can last from 8 hours to up to 3 days, depending on the ambient temperature, humidity and amount of airflow on the body.
Absorbent pads measuring 41 cm x 51 cm. These heavy-weight perforated pads are packaged in a box. Packaged per 100 pieces. The wipes are made from 3-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for abso rbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 112 litres.
Eye-volution – from a technical point of view probably the most complete Uvex glasses. Temples, front and nose bridge made of DCT: hard on the outside, comfortably soft on the inside. Temples easily adjustable in length and inclination. Replaceable lens. Fitted with clear polycarbonate lenses that provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the polycarbonate. With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean. EN166/170 2-1.2.
Blue industrial paper roll, 100% recycled fibre. High tensile strength, more volume in the hand. High absorption. Dimensions: length 380 m x width 26 cm, 2 layers, 1000 sheets. For use with metal floor stand, art. no. 00330081.
Absorbent pillows measuring 43 cm x 48 cm. These heavy-weight cushions are packaged in a box. Packaged per 16 pieces. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorbent pillows for regular leaks in the same place. Absorption capacity: 105 litres.
This glove is specially designed to protect against liquid gases at very low temperatures. The Gore-Tex membrane ensures water-tightness. American assembly. The cowhide leather is oil and water repellent and heat resistant. The glove has a 20 cm long cap-cuff and is lined in wool.
1" connection
Jacket / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / Washable at 95°C / High frequency welded seams / Outside: Fixed hood / Zip closure under flap with press studs / Raglan sleeves / Elasticated wristband / Underarm ventilation / Back length 85 cm (L) / Fabric: FLEXOTHANE® Kleen: / 100% polyamide knitting 6.6with PU coating; ± 170 g / m² Colour: W02 white
Shirt, 60% modacryl 34% cotton 2% negastat, 220 gr./m², flameretardent, antistatic, long sleeves, round collar, double-layered back and shoulder piece. Available in: navy.
P filter for motor unit Versaflo. Protects against highly toxic dust, mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. Odors only if concentration below the MAC value. NO protection against gases, only comfort.
Safe Step avoids hang trauma after fall. No PPE.
Disposable safety cutter for left- and righthanded. For opening different packages. The blade is not replaceable. In this way, the knife can not get lost. Again, the safety technique of recoil knife is applied. The knife fits in any pocket. No PPE.
Dark blue high shoe S3 in full grain leather with steel toecap and steel antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39-48.
PC visor in clear polycarbonate, mechanical side arms. Compatible with the Uvex pheos helmets with short peak E-S-WR, B-S-WR and pheos alpine (+adapter) and compatible with the K2H earmuffs. With uvex supravision excellence coating technology: anti-fog on the inside and anti-scratch an chemical resistant on the outside. The visor is easy to clean thanks to nanotechnology.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
2-point textile chinstrap, compatible with V-Gard helmets.
High shoe with brown water resistant full grain leather upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in Artico 3D: antibacterial. Outsole in PU/PU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
Disinfectant spray for the skin. User instructions: Spray directly on the area to be treated, then dab using a compress. Repeat this process every 6 hours if necessary. Immediate effect. Composition: Aqua, chlorhexidine digluconate (Cas No. 18472-510) 0.2%.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. BOA closing system. Fitted w ith a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-48.
Hi-vis fleece jacket with zip, 2 inset side pockets with concealed zip and reflective tape. Quality: 100% polyester, ± 235 g / m² Available sizes: S-4XL. Available colors: Fluo orange and fluo yellow. In accordance with: EN ISO 20471 class 2.
With a contemporary fit, a slim neck collar and a natural stretch, this T-shirt is a versatile and comfortable choice for the workplace. The shirt is made of 100% combed, ring-spun cotton, which contributes to the good quality and neat appearance. Quality: 100% combed cotton, single jersey. Available colors: Red, orange, royal blue, navy, ink, black, white, lime, purple, turquoise, dark gray, army green. Available sizes: XS - 5XL.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Isotec S5 safety boot in ultra chemical resistant and flame resistant material with steel toecap and steel antiperforation sole. Removable, washable insole. Vulcanised rubber sole, oil resistant, non-slip and heat resistant up to 300°C (contact heat). With shock absorbent tunnel system in the heel. Colour: black. Available: 35-50. substances.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Flame retardant and anti-static hi-vis waistcoat: V-neck; Zip closure; Without sleeves; Flame retardant reflective tape (50mm); Back length 70 cm. Quality: 98% polyester + 2% AST; ± 120 g/m². Available sizes: S-3XL. Available colours: Fluo yellow and fluo orange.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
