BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Low shoe in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. BOA-closing system. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12).
Plastic dispenser for attachment to wall, consisting of a plastic pump (Art: 1053793), 0.5 litres of cleaning fluid (Art: 1053666) and cleaning wipes (Art: 1021979).
Earplug Spark Plugs 7860. Packed in a refill bag per 500 pairs. Complies with: EN 352-2 (SNR 35 dB).
Chemical resistant glove for precision and medium duty work. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 18gg nylon liner for high fingertip sensitivity in difficult conditions. Sizes: 7-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: JKLMNOPT, EN ISO 374-5:2016 Virus.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Ladies version of the T-shirt exact 190 with short sleeves: - pre-shrunk material; - 1x1 rib knitted collar; - double-needle stitched sleeves and bottom hem; - with side seams. Quality: 100% ring-spun jersey cotton, 185 g / m². Available sizes: XS-3XL. Available colors: White, black, navy, red, orange, sport gray, pacific gray, royal blue, purple, fucsia, rose, yellow, brown, pacific green, kelly green, etc.
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (51-63 cm) and highly absorbent hydro-flock sweatband. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Can be fitted with flip-up safety glasses (to order separately: 1000242).
Dust- and liquid-proof plastic wall cabinet for storage of two Barikos bottles.
Double Lanyard, 1.8 metre length, consisting of elastic strap with integrated shock absorber. Non-stretched length of the Lanyard is 1.2 metres, which enables better manipulation of the Lanyard. Double Lanyard to allow continuous protection, even when switching be tween two anchor points. Fitted with a standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
The Stability insole (sizes D and XD) provides optimum support to the heel and middle foot. It absorbs excessive perspiration moisture and promotes optimal fit due to the lateral foot support. Top layer consists of antibacterial X-Static silver fibre and controls moisture and heat. Excess heat is removed and prevents blistering. Sizes: 39 - 48.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Motor unit Versaflo TR-302E+ can be combined with hoods of M and S series. Includes filter cover and air flow indicator. Can be combined with filters TR-3710, TR-3800, TR-3820 and BT-hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Battery, charger, air hose belt and filters can be ordered separately. Flow: 190L / min. Weight: 1095Gr with filter, belt, battery. NPF: depending on chosen hood.
Belt bag for storing your Martor safety knife. Made in black nylon with loop, sturdy and wear resistant. Dimensions: 215x60x28mm
High shoe in microfiber, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% leather free. Sizes: 38-48.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. Oekotex certified.
Low shoe in waterresistant pull-up leather, with a synthetic antiperforation sole and carbon 200J toecap. Fitted with a textile 3D-l ining . Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Stylish multinorm HI-VIS softshell with hood. Quality: 60% modacrylic, 38% polyester and 2% carbon, 350 gr / m². available sizes: XS-5XL. Available colors: Hi-vis yellow/navy. Compliant with: EN-1149-5, EN ISO 20471 class 2, EN ISO 11612, EN 13034, EN ISO 11611 and IEC 61482.
Hi-vis parka: • wind and waterproof • taped seams • good breathability • detachable hood with adjustable rubber cord • two chest pockets with zippers • two front pockets with zip • D-ring in left breast pocket for ID card • three inside pockets • adjustable cuffs Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow / black, fluo yellow / navy and fluo orange / black. In accordance with: EN ISO 20471 class 3.
Premium grain goatskin leather combined with cut and impact protection glove. TPR impact protection on top of the hand and the full lenght of the fingers. Additional palm leather layer enhances cut resistance. Reinforced seams on the index finger and base of thumb. Secure cuff closure with TPR tab closure. Sizes: 8-13.
Bicolor softshell jacket with detachable hood. Contrasting zipper on the front and on the side pockets. Adjustable sleeves with velcro closure. Drawstrings at the hood and at the bottom hem. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Zipper pullers in contrast color. Oeko-Tex 100 certified. Quality: 100% recycled polyester, 280 g/m². Available sizes: S-5XL. Available colors: Blue/Navy, Navy/Blue, Black/Grey, Black/Red, Black/Orange and Gray/Black.
Crew neck sweater. 2x2 rib with elastane at the bottom hem and at the cuffs. Crescent-shaped neck. Oeko-Tex 100 certified. Quality: 60% cotton, 40% polyester, 280 g/m². Available sizes: XS-5XL. Available colours: White, navy, dark grey, light grey, green, red and black.
Very comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point and positioning belt. Straight leg straps easily adjustable. Shoulder straps adjustable. Tires made of dirt-resistant and wear-resistant webbing. Harness very easy to put on. Built-in fall indicator. Comfort padding on leg straps and hip belt. Maximum user weight including material: 140kg.
Cut resistant lined welding glove made of durable soft goat leather with Kevlar seams.
Easy-to-attach 2-point leather chin strap. Available in: black.
Battery LI-ON, heavy duty, for Adflo motor unit. Allows approx. 8 hours of work if a combination of dust and gas filters are used on the Adflo motor unit.
Fireproof Blanket fiberglass. Size 120 x 120 cm. For fixing the wall, red support. With Dutch/French printed label. Suitable for kitchen fires.
Trousers in a lightweight and durable material partly made of recycled polyester.
Half-zip sweatshirt from the Progression collection, enhanced visibility EN17353.
Sportive spectacles in clear polycarbonate. Frame is made out of recycled and bio-based materials. The uvex i-guard with its highly flexible frame ensures the best protection – and adapts individually to the widest variety of face shapes. The ergonomically shaped glasses reliably protect against liquids and particles..The clear polyamide lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. PCF (Product Carbon Footprint) = 0,19kg CO².
Seamless liner of cotton/polyester, roughened green latex coating on palm and fingertips.
AlphaTec® 02-100 laminated safety gloves have a five-layer design with hypo-allergenic lining. Can also be used as liner gloves. Extremely supple and ergonomically formed model based on patented seam technology. Offers protection against an exceptionally wide range of chemical products and solvents.
Helmet attachment system made of plastic, for use with all Fitt All Elect visors. Entirely metal-free, for use in electrical installations.
Very comfortable Fall arrest harness with 2 mounting points on back and chest. Breast Fixation Point by D-ring. Leg and shoulder straps with quick release, very easily adjustable. Harness very easy to put on. Universal size. Weight: 1,28kg. Suitable for general industrial applications.
Splash suit made of blue laminate. Suit with attachedc hemically resistant Kemblok gloves. The pant legs have integral socksandstraight legsthat can bepulled over boots. The zipper is located on the back of the suit. The suit is designed to be worn over the compressed air equipment. Available in: blue. Sizes: S - XXL.
Red life-jacket (inflates automatically), suitable for all waters and all conditions, e.g. extreme weather, when wearing heavy, protective, waterproof clothing. The jacket keeps you safe even during unconsciousness and will keep airways clear of the water.
Earmuff X4 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New noise reduction pads for better noise reduction, and 'spacers': an extra seal ring which reduces resonance. Despite recent innovations, these earphones have an extra small housing. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3 respiratory and eye protection. SNR: 33dB.
6 refills of Salvequick blue detectable plaster. Each refill contains 35 adhesive plasters: 21 of 72 x 19 mm and 14 of 72 x 25 mm. Suitable for Salvequick dispenser.
Safety knife with an additional slider on the back of the cutter. For work with triple-walled corrugated board boxes. MAXISAFE adapts to the type of cut required at the time, be it sideways, horizontal or straight from "up top". Designed for a minimum of effort at a maximum of efficiency. Ergonomically styled plastic handle with metal wear- protector at the blade outlet.Welcome the safest and most versatile knife mechanism in the world! For use by right- and lefthanders. "GS- TESTED FOR SAFETY". Easy blade change: no extra tools required. No PPE. Blades: 1024827
High welding shoe in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a velcro and breathable, abrasion resistant liner in textile. Outsole in PU/Nitrile, SRC antislip, oil and carburant resistant. Fire proof stitching in para- aramide. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 38-48.
Semi-orthopedic inlay sole for women. Excellent schock absorption. Suitable for products of the NOVA productgroup. Sizes: 35-42.
Low shoe in microfiber, with a synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. 100% metalfree. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Sandal in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Comfortable and sturdy stretch work trousers with reflection details, knee pockets and extra reflection piping. Quality: 65% polyester / 35% cotton. Available sizes: 42-66. Available colors: navy, black, and dark gray.
The Arbus cold storage bib and brace trousers protect you excellently against the cold with its fixed quilted lining. To stop the slightest breeze of wind, the legs can be narrowed and the hem adjusted. For your convenience, the braces come with a buckle, the knees are reinforced and the fly has a zipper. Exterior: Front fly with zipper, 2 inset pockets, Braces with buckle, Leg narrowing below by touch and close fastening, Knee reinforcement, Zip closure under flap with touch and close fastening at leg end, Adjustable hem at leg end with press studs. Inside: Fixed quilted lining. Fabric:100% polyamide; ± 185 g/m² + HV - 100 % PES ± 220 g/m² - Hi-vis Cordura: 100% polyester ± 210 g/m². Color: Hi-vis yellow/navy.
Modern, fitted bicolor t-shirt with ribbed neck in four layers and elastane in the hem. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. The fabric is ring-spun and post-treated with an enzyme wash, making the material pre-shrunk and soft to the touch. Oeko-Tex 100 certified. Quality: 50% organic cotton, 50% recycled polyester, 180 g/m². Available sizes: S-5XL. Available colors: BLUE/Navy, Navy/Blue, Black/Red, Black/Orange, Black/Grey and Gray/Black.
Low shoe in velours leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Chemical protection gloves against hazardous chemicals. Resistant to acids, bases, solvents and alcohols. Reach compatible. Length: 38cm, thickness: 0.78mm.
The perfect protection for sporadic and light kneeling situations. This knee pad is non-conductive, silicone-free and made of foam r ubber. Good resistance to oil-based products. Sizes: 36 cm x 53 cm x 2.5 cm. Other sizes are also available.
All-round white glove for catering operations. Mechanically strong, heat resistant and impervious for ovens, dishwashers, autoclaves, cooking activities. Nitrile glove of 45 cm with a cut resistant insert and brushed finish on the fingers. Sizes: 7 (outer size:9), 9 (outerr size: 11) and 10 (outer size 12).
Visor in clear polycarbonate. Heat resistant to temperatures from -50°C to 135°C. Dimensions: 450x220mm. Thickness: 1mm. In line: EN166.
Foldable mask, class P3, New Generationfor toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic woven headbands. Improved Cool Flow Comfort Exhalation valve provides even lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. This mask does not contain components of rubber latex and PVC. NPF: 50.
S3S boot: 100% metal-free, specifically for outdoor and construction work, stable and good grip. Extra protection against cold.
Safety helmet made of polyethylene with 6-point textile suspension (51-63 cm) and black nylon sweatband, without ventilation. With European 30 mm slot for attachment of hearing and face protection.
Blue, unlined nitrile gloves with Aquadri composite to keep hands free of perspiration. Very good physical characteristics, great ta ctility, silicon-free. Good chemical resistance to greases, oils, hydrocarbons, water-thinned solutions and various acids.
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 457mm.
Low-cut, black safety shoe in full grain leather with steel toecap and antiperforation midsole, scuffcap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight duocomfort (PU/Nitrile) outsole, with heel profile, high wear resistance, antistatic, slipresistant, resistant to oil, petrol and acid, high shock absorbency. Sizes: : 37-49 (D, XD).
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.
Welding glasses with yellow synthetic frame, with elastic headband for a perfect fit. Fitted with a flip up part and lens with green welding shade.
Oval carabiner made of steel. Manual closure of the locking mechanism. Opening: 18 mm. Resistance: 25 kN. Weight: 156g.
Disposable knife/scraper, steady and functional. Suitable for the cutting of carton, paper and foil up to 6mm.
Earmuffs X5 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New damping pads increased damping, and 'spacers': an extra seal ring that reduces resonance. Adjusted easily using 'grip areas' on the top and bottom, durable, ergonomic and very light in relation to a noise-reduction. Can be combined with 3M respiratory and eye protection. SNR: 37dB.
Quick cleaning and disinfection of surfaces and equipment. Kills bacteria, mould and viruses in 1 minute. Non-corrosive. Also suitable for the disinfection of helmets, safety shoes and full-face masks.
Red safety cutter with simple hook. Unique cardboard piercing shape prevents damage to carton contents.Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments Small ridges ensure a secure grip. Simple blades: 1021645 - dimensions knife: 1cm.
Gloves in soft jersey lining with natural rubber coating. Comfortable, smooth latex for excellent grip on wet and smooth items. Also insulates against cold.
Ladies t-shirt in 95% cotton/5% spandex, 190 gr/m² single jersey. Full- fashioned model with extra stretch for better wearing comfort. Smooth and thin V-neck. Available sizes: XS-XL. Available colours: Lime, Pink, Red, White, Turquoise, Purple, Navy, Black. Stockarticle in black, XS-L.
Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Synthetic leather glove, Winter-lined, 0,7 mm, Synthetic leather, Polyester, Fleece, Cat. II, Black, green, Chrome free, Waterproof, Winter-lined, Velcro®, for precision work. EN 388:2003, 1121 EN 511:2006, 11X
Havep Multi Shield multinorm work trousers model 80308
