BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Matching detachable hood for parka Sentai. Colour: Navy
Dust mask, class P2, for harmful dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Internal comfort pad for nose. With adjustable, elastic headbands. NPF: 10.
Refill bottle containing 500 pairs of 3M ™ E-A-Rsoft ™ Yellow Neons ™ Earplugs. Advanced foam rubber formula for long-lasting wearability. Refill bottle with E-A-Rsoft ™ earplugs for the 3M ™ One Touch ™ Dispensers, allowing users easy access to earplugs. SNR: 36dB.
Motor unit to be combined with metal hoods from S and M series. Units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provide better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to the smooth surfaces. Used with both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Battery, charger, belt, filter cover, filter, filter holder and air hose to be ordered separately. Flow rate: 170-220 L/min. Weight: 670 g without accessories. NPF: depends on cover used.
Low shoe in waterresistant black nubuck leather, with an synthetic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-47.
Belt bag for storing your Martor safety knife. Example: Secupro625, Secumax 363, ballpoint pen, safety scissors. Made in black nylon with loop, sturdy and wear resistant. Dimensions: 215x68x40mm
Compact safety knife for routine cutting tasks. The metal-detectable plastic handle makes it easy to trace. It's concealed cutting edge easily copes with single-layerd card-board, film and packing tape and keeps your fingers safe. To order by 10 pieces. No PPE.
Guide 6402 CPN offers a unique combination of maximum protection against needlesticks and cuts while maintaining flexibility and comfort. This model is the latest innnovation with needle and cut protection in the palm area. Kevlar in dark gray for heat resistance and cut protection is used on the back of the hand. Suitable for police and security forces when there are risks of cut, puncture and needle injuries. Great grip and tactile feeling. Sizes: 7-12.
DuPont™ Tyvek® 500 Labcoat with zipper model PL309NP. Labcoat with collar, available in white and in sizes SM to 2X. Zipper closure. Without pockets. Elasticated cuffs (tunnelled). Stitched internal seams. Specially designed for use with Tyvek® apparel, Tyvek® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances. Tyvek® garments and accessories are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added. Applications include: pharmaceutical handling, chemical protection, lead and asbestos abatement/remediation, general maintenance/operations, spray painting and general clean-up, amongst many others. Available sizes: S-2XL. Available colours: white.
Women's Shift trousers with concealed zip, thigh pocket with concealed press stud fastening, 2 inset side pockets, ruler pocket with tape measure pocket, 1 back pocket with concealed press stud fastening, D-ring, reflective piping, adjustable elastic at the waist. Quality: 65% / 35% cotton / polyester, 290 g / m2. Available sizes: 34-54. Available colors: Navy, black and gray.
Very light safety spectacles with polycarbonate lenses. 3M ™ Pressure Diffusion Temple Technology that helps distribute pressure across the ears to improve frame comfort for a firm and comfortable fit. The 3M ™ Scotchgard ™ Anti-Fog Coating offers superior anti-fog and scratch-resistant properties.
Glasses with clear polycarbonate duo-lens, equipped with supravision coating. Glasses with adjustable ear springs and soft-flex nose-bridge. Fits the face perfectly. X-tended sideshield for increased side protection. With supravision Excellence coating: Hi-tech coating, scratch-resistant on the outside, free of condensation on the inside, chemically resistant and very easy to clean. Colour frames: blue/charcoal.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. Fitted with adjustable, elastic headbands. Without an adjustable nosepiece (metal-free) and extra wide headbanf for more comfort and a secure fit.NPF: 50.
The Corran is a trendy hi-vis sweater with segmented reflective tape that offers ARC protection. The bi-colour sweater is equipped with 2 side pockets with zip closure and has anti-microbial properties. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Fluo yellow/Navy. Complies with: IEC 61482-2 : 2018 APC1 - ATPV 14,8 cal/cm², EN ISO 11612 : 2015 / A1 B1 C1 F1, EN ISO 14116 : 2015 / IND.3, EN 1149-5 : 2018 and EN ISO 20471 : 2013 +A1 2016 / Class 2.
Hi-vis coverall Macas with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo yellow/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
High shoe in nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, and particulates.
Chemical resistant glove with cut protection for precision and medium duty work with cut risk. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 15gg para-aramid lining. Sizes: 7-12. Complies with: EN388:2016 4.X.4.1.C, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 Virus.
High safety shoe in waterrepellant Cordura with synthetic antiperforation sole and a synthetic toe cap. Outsole in PU/PU, including ESD. Has a removable inner schoe. Antislip SRC and choc resistant.
Service pant in full stretch that provides maximum freedom of movement. Modern, tight fit. Sewn-in, adjustable, stretch in the waistband for comfort, also rubberized to keep the pant on place.
Pre-formed, washable and reusable earplugs made of soft foam rubber for a perfect fit. Fitted with vinyl cord to prevent loss. 50 pa irs per package.
T-shirt from the Progression collection, enhanced visibility EN17353.
The safety shoe features a fibreglass toe cap and a flexible FAP® midsole. In addition, the shoe offers TPU protection in the heel and toe area. The upper consists of durable microfibre with breathable Sandwich Mesh, while the lining is made of BreathActive functional lining. The footbed features evercushion® technology. The sole of the shoe, the MOTION PWR, is heat-resistant up to 300°C and has a slip-resistant rubber outsole with a PWR.FOAM midsole for excellent cushioning, energy return and stability. Suitable for low-voltage electrical work.
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff. Attractive, highly visible look with yellow and b lue stripes. Available in: yellow/blue.
Dust- and liquid-proof plastic wall cabinet for storage of one Barikos bottle.
Prairie sole inserts are made of leather with a felt layer. They are breathable, mildew resistant and do not conduct heat or cold. S izes: 36-47.
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Reduced peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: yellow, black, navy blue.
Superior quality gloves in cowsplit leather, made with Kevlar® fibres for longer service life. The gloves have extra palm, thumb and index finger reinforcement and a 10 cm protective cuff. Available in: green/white. Size: 10, 11, 12.
Flexible, chemically resistant PU sealing mat. Tightly seals off draingrates and prevents spilled liquids from draining away. As long as it iscleaned with a non-aggressive detergent, this mat is reusable. Dimensions: 90 x 90 cm. Suitable forsewers with dimensions 70x70cm. Comes in a handy storage box.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with ha lf and full face masks with standard threads.
Arm protector, polyethylene, thickness 20 micron, length 40cm. Package containing 100 pieces. Available in: blue. Sizes: universal size. hygiene, transport and distribution sector. No PPE.
Low shoe glove in water repellent black nubuck. With an aluminium 200J toecap and a synthetic anti-perforation sole. Equipped with TPU heel reinforcement. Inner lining in breathable textile and perforated insole in EVA. Reinforced laces. Sole in PU/Nitrile, resistant to 300°C. Sizes: 35-48.
Bodywarmer ripstop, 100% polyester with PVC coating, waterproof, inside: 100% polyester wadding 180 g / m², retro reflective accent, zip with press studs, straight collar, microfleece lined 280 g / m².
High, brown, welling safety boot in full grain leather with steel toecap, steel sole plate and scuffcap. Leather lining and leather insole. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Outsole in PU/rubber: slip resistant, high wear resistance and optimal heat resistance to 300°C (HRO). Sizes: 37-48.
Extra high ranger boot for foundries in full grain leather with 200J steel toecap and anti perforation sole in steel scuffcap in PU. Closure: laces + zip. Fitted with a leather liner, padded tongue and interior insole made out of leather. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Outsole in PU/Nitril with heel, longwearing, with very good slip resistance SRC and oil, fat and acid resistant. Laces: 1035603. Sizes: 39-49.
Multirisk rain trousers with igh level of protection but still light in weight. The Hovi hi-vis trousers are a waterproof rain trousers with ARC protection in a light and improved Siopor® Excell fabric. The 3-layered fabric protects excellently against foul weather, heat, flames, welding sparks and the risks of an electrical flashover. These high-visibility trousers are soft and supple, making them a pleasure to wear in potentially hazardous working environments. Quality: 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m²; 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Available colours: Fluo orange/navy and fluo yellow/navy.
Gray flame-retardant PU coating on 2 sides, for strength and slip resistance. For light welding and grinding work. Vertical and horizontal use. Free of asbestos. Short-term temperature resistance up to 600°C. Approved according to EN13501-1
Refill pack containing 500 pairs of EAR Classic for One Touch dispenser (1031971). EN 352-2 (SNR 28).
Terylene suspension with ratchet & Drytec sweatband, suitable for Centurion Concept, Spectrum, Vision Plus and Nexus Core.
Low-cut safety shoe S2 made of nubuck leather, with 200J steel toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non-slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: D (35-48), XD (37-48).
Dust mask, class P3, for toxic dust. Form-retaining mask thanks to Dura- Mesh shell on the outside of the mask. Mask always retains itsshape,even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalation resistance and low levels ofCO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. The pleated filter technology reduces breathing resistance to 50%. Non reusable. Fitted with adjustable, elastic headbands with closure. packed per piece. NPF: 50.
Dust mask, class P3, for toxic dust and ozon concentrations below the treshold limit value. Form-retaining thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with adjustable, elastic headbands with closure. The new IonicAir filter technology reduces breathing resistance by 30%.
JALCOPPER is a high safety shoe in the J-QUARTZ range from JALLATTE, with a shaft made of water-repellent grain leather, antistatic. a sole polyurethane J-Quartz equipped with the JAL'GRIP system (LG) and a safety nose made of composite Xetane B and perforation-resistant sole. EN ISO 20345:2022 A1:2024 From 35 to 48
Sweater with full zip from the Progression collection, enhanced visibility EN17353.
Carry bag for full face mask 3S. With handy shoulder strap. Ideal for dust-free storage of full face mask and filter. Dimensions: 295mm x 200mm x 295mm.
Small, multifunctional bin for quick and efficient response to leaks or maintenance projects, anywhere in the factory. The spill kit includes a handy inner panel with well organised, clearly legible leakage guidelines. Absorption capacity: 69 litres. Content: 1 ro ll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of MRO qualit y.
Lightweight (34g) and esthetic safety spectacles, with integrated side protection. Antistatic, with flexible side pieces.
Motor unit Versaflo TR-302E+can be combined with hoods of M and S series. With filter cover and air flow indicator. Heavy Duty Battery, charger,length adjustable air hose BT-30, dust filter and pre-filters are included. Can be combined with filters TR-3712E, TR-3802E, TR-3822E and BT- hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Flow: 190L / min. Weight: 1095 with filter, belt and battery. NPF: depending on chosen hood.
Jacket flame retardant and antistatic, 80% cotton 19% polyester 1% anti- static yarn, satin binding, 280gr./m², 1 chestpocket with flap, 2 patched pockets with flap, hidden closure, retro-reflective bands. Available in: navy.
Spare blades (one sided!) for safety cutter Klever X-change (1018439)
High shoe in black velours leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35- 42.
Industrial mineral absorbent for safe, quick absorption of harmful liquids that have leaked or spilled. Rapid, large absorption capacity.Bag of 20kg.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWs automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
High capacity battery for TR-600. Weight: 620 grams. Usage duration depends on the filters used.
Easy-to-clean belt for TR-600.
Superlight welding overspectacles with panoramic side protection and a perfect, pressure-free fit. Temple length is size adjustable. Frame in black/green synthetic material. Fitted with a grey polycarbonate lens: welding lenses are protection from harmfull UV and IR radiation. With Infradur coating: High-tech coating, scratch resistant on both sides, fog-free on the inside and minimise damage from welding sparks.
Baxter safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti- fog coating.
High shoe S3 in black full grain leather with cut resistant lining, fitted with a steel toecap and metallic antiperforation midsole. Breathable textile lining. Outsole in PU/Nitrile, resistant to fats and oils. Fitted with a half scuffcap.
Yellow safety boot from the Acifort range (Acid+Confort) in PVC/Nitrile rubber fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC/nitrile rubber with tread resistant against dirt. Wear resistant and confortable through the optimum grip. Sizes: 40-48, 49/50.
Parka Gore Tex Diablo multinorm: - 2 front pockets; - 1 napoleon bag; - 1 breast pocket; - 1 inner pocket. Zip-in fleece : 1046734 Quality: PES / CARBON WITH GORE PYRAD TECNOLOGY Available sizes: XS-3XL. Available colors: Fluo yellow / navy, fluo yellow / gray and fluo orange / gray. Compliant with: EN 343 4:4, EN ISO 20471 class 2/3, EN ISO 11612, EN ISO 14116, EN 13034 type 6, EN 1149-5 and IEC 61482-2 class 2.
Low shoe in black waterreistant full grain leather with synthetic toecap and synthetic antiperforation mid-sole. PU scuffcap. DryShield membrane. Sole in PU/PU. Sizes: D (36-48), XD (39-48).
Sturdy blue single use glove in 100% nitrile with rolled edge. Completely powder-free and free of natural rubber. With textured fing ers. Food suitable. Suitable for medical examination. Sustainable packaging.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and split leather hood cuff. Total length 35cm. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
Safety helmet made out of ABS with integrated spectacle. Has a 6-point textile cradle (53-64cm). Compatible with (1038817 KINRIEM 4-PUNTS VR EVOLITE/EVO). Available in: white, blue, red, white/smoke, blue/smoke, black/smoke, orange smoke and green/smoke.
Fireproof battery bag to safely transport, store and charge small batterie of electric devices. If the battery should ignite, the damage will be limited to the bag and the battery. Tested with Li-Ion batteries up to 400W). Big enough for almost any bicycle battery. Dimensions: 215x160x145cm.
This cream protects the skin against all oil-based, non-water-soluble substances and organic solvents (oil, grease, paint, graphite, metal dust, soot, etc.). Easier to wash hands, while the dry hands still retain a good grip. Protection against non-water-soluble s ubstances. Content: 100 ml tube.
Heating kit that provides heat for 10 hours after packaging is broken. To be used in combination with helmet caps; These warmers can also be used in gloves.
Adapter Peltor P3EV/2 for helmets with standard 30 mm slot (except G2000). This adapter can also be used for attachment of visors.
Polyamide safety helmet with integrated flip-up face shield (310 x 170 mm / 1.7 mm thick) made of polycarbonate, specially approved for short-circuit arc welding (marking 8) and protection from molten metal particles (marking 9). This high-quality shield also has an N approval, which stands for anti-fogging. Impact resistance of 120 m/s (marking B). With 4-point textile suspension (53-63 mm) w ith ratchet and leather sweatband. The helmet is especially good for work in switch boxes and where there is a risk of ejected parti cles, from grinders for example.
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C and formaldehyde, specifically for laboratories and hospitals. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dus t filter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%.
