BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Parka, hi-viz, 100% polyester, zip closure under flap with press studs, hood in collar, fleece in collar, mobile pocket with flap and velcro, ID holder with velcro closure, 2 patched pockets with flaps and velcro, 2 horizontal reflective bands, 1 vertical band on each shoulder, drawstring in waist, inside pocket with zip closure, napoleon pocket, pen holder. Removable vest, detachable sleeves, body with 2 pockets, ID holder with velcro, mobile pocket with flap and velcro, 2 inside pockets, 2 horizontal reflective bands, 1 vertical reflective band over each shoulder. The vest can also be worn separately with the signal section to the outside or inside.
Hi-vis rain jacket with detachable bodywarmer / Multifunctional 4 in 1 product / Can be used in all weather conditions / / 100% waterproof / Windproof / Highly breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Comfortable / Supple / High tear resistance / Taped seams / Outside: Straight collar / Foldaway hood in collar / Zip closure under flap with touch <(>&<)> close fastening / 2 inset pockets / 1 Napoleon pocket / Kimono sleeves / Elasticated wristband with narrowingby touch and close fastening / Drawstring in waist / Back length 85 cm (L) / Inside: Fixed mesh lining / Knitted wind cuffs in sleeves / 1 / Inside pocket with zip closure / Zipper in back lining for placing logos / Fabric: SIOPOR® Ultra: / 100% polyester / Fabric with / 100% PU coating; ± 195 g / m² Colour: 320 hi-vis yellow / green - 717 hi-vis red / grey - 065 hi-vis yellow / navy - 279 hi-vis orange / navy
Jacket, Guardian H²O polyester, 260 gr/m², zipper under flap, lined, hood also available. Concealed zipper and velcro closure at centre front, chest pockets with safety flaps and velcro closure, inside pocket at left hand side, goggle pocket behind storm flap, lower pockets with safety flap, lower side entry pockets with blind zipper closure, adjustable velcro closure at cuffs, adjustable puller at hem, fully taped seams, reflective striping.
"Parka, Gore Tex Pyrad TM Fabric Technology, 2-layer laminated in polyester, waterproof, windproof, breathable (WWB). This parka combinest this WWB principle with the highest protection against heat and flame. Permanently anti-static technology. Industrial laundry at 60°C. Available sizes: S-4XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
This Essentials Rain Pack is delivered as a set. This lightweight suit can easily be rolled up to store when it does not need to be used. Comes in a retail package, perfect for shop displays. Characteristics: ● Watertight and taped seams prevent ingress of water ● Ventilating back and eyelets for improved breathability power and comfort ● 2 bags for safe storage ● Concealed hood for extra functionality ● Elastic cuffs for a good fit ● Fully elastic waistband for ultimate comfort ● Adjustable with press studs for a secure fit ● Retail packaging suitable for retail sales ● jack and trouser set for convenience ● Extremely water repellent. Quality: 100% Polyester, 190T, PVC Coated 190g. Available colors: Marine. Available sizes: S-3XL. Complies with: EN 343: 2003 + A1: 2007 / class 3-1.
Comfortable high visibility parka with permanent lining. Model with twoside pockets that have a Velcro closure, inside pocket. The tricot wind cuffs in the sleeves protect against cold and wind. Bi-directionalzippercovered by storm flap with press-studs.
Hi-vis ambulance parka with concealed zip, adjustable sleeves, 2 vertical front pockets, Napoleon pocket, radio pocket, radio loop, badge holder and round velcro zone badge on left sleeve. Including fixed hood. Quality outer fabric HIVIZ: 100% polyester + PU coating, 200 gr / m². Quality outer fabric Enamel: 100% Polyamide Lining: 100% PES mesh (fixed comfort lining) Yellow reflective prism bands Available colors: Fluo Yellow / enamel blue. Available sizes: XS-4XL. Conforms to: EN ISO 20471 Class 3, EN 343 4.4.
Hi-vis rain jacket with detachable softshell, SIOPOR® Ultra: 100% polyester fabric with 100% PU coating; ± 195 g/m², multifunctional 4 in 1 product, can be used in all weather conditions, 100% waterproof, windproof, highly breathable, water repellent outer fabric, moisture attracting coating on the inside, comfortable, supple, high tear resistance, taped seams, straight collar, foldaway hood in collar, zip closure under flap with touch <(>&<)> close fastening, 2 inset pockets, 1 Napoleon pocket, kimono sleeves, elasticated wristband with narrowing by touch and close fastening, drawstring in waist, back length 85 cm (L), fixed mesh lining, knitted wind cuffs in sleeves, 1 inside pocket with zipper in back lining for placing logos.
Hi-vis rain jacket / 100% waterproof / Windproof / Highly breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Very comfortable / Supple / Very light / Taped seams / Outside: Fixed hood in collar / Zip closure under flap with press studs / 2 patched pockets / Round inset sleeves / Sleeve narrowing by press studs / Underarm ventilation / Back length 85 cm (L) / Inside: Fixed lining: mesh in body and polyamide in sleeves / Fabric: SIOPOR® Regular: / 100% polyester / Fabric (plain weave) with / 100% PU coating; ± 155 g / m² Colour: FC1 hi-vis orange - FY1 hi-vis yellow - FR1 hi-vis red
Raincoat FR/AS, 50% Polyamide, 50% Polyurethane, 170 gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zipper at the bottom storm flap with press stud fastening, adjustable sleeves with press stud fastening, 2 straight pockets. Complies with: EN 343 3.1., EN ISO 14116 index 1, EN 1149-5.
Flame retardant, anti-static hi-vis rain jacket, SIOPOR® FR AST: 100% polyester fabric with 100% FR PU coating + AST; ± 250 g/m², 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Comfortable, Supple, High tear resistance, Taped seams, Different linings/fleeces can be zipped in Outside: Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch <(>&<)> close fastening, 1 patched chest pocket, 2 patched pockets with gusset, 2 loops for badges, 1 Napoleon pocket, Round inset sleeves, Sleeve narrowing by touch and close fastening, Drawstring in hem, Back length 85 cm (L), Fixed flame retardant cotton lining, 1 inside pocket, Inside pocket for storage of hood, Zipper in back lining for placing logos. in line with: EN 531 A.B2.C1, EN ISO 14116 index 1, EN 1149-5, EN 13034, EN 343 3.3., EN 471 3.2.
Parka ripstop, 100% polyester ripstop with PVC coating, waterproof, taped seams, reflective piping, inside partly quilted polyamide partly fleece, zip with flap and Velcro, hood in the collar, lined, adjustable drawstring, elastic cuffs, elastic waist.
Hi-vis Raincoat and Rain Pants. 50% Polyester/50% PVC, 110 g/m², With reflection. Raincoat: Hood with drawstring. Sleeves with adjustable Velcro closure. Two outside pockets. Rain pants: Elastic at the waist. Highly flexible seams. Two side pockets. Available colours: fluorescent yellow, fluorescent orange. Available sizes: XS-5XL. Complies with: EN 343 3.1.
Jacket, 100% polyester, 150 gr./m², water-repellent finish, 100% thermal polyester filling 300 gr./m², insulating, lined hood, padded collar, two patch pockets with flap, patch breast pocket with flap and ID pocket, zip with storm flap and velcro, tricot cuffs, 1 horizontal reflective stripe on chest and back, water vapor permeability and even at temperatures between 5 ° C and -40 ° C. Available in: navy. Suitable for cold stores and cold stores. Sizes: S - 3XL.
Hi-vis winter parka for women: Waterproof and taped seams prevent water ingress; Lightweight flexible interrupted HiVisTex Pro reflective striping; Ezee Zip; Lined for extra thermal insulation; aluminized liner; Detachable ID holder; Quick drying knitted cuff. Quality: 300D Industry: 100% Polyester, 300D Oxford Weave, PU Coated with a Dirt Resistant Finish 190g. Available colours: Fluo yellow/black and fluorescent orange/black. Available sizes: XS-2XL. Complies with: EN ISO 20471 class 2, EN 343:2019 Class 3:1 and EN 342.
Flame Retardant Hi-Vis Raincoat in PU quality: • Fixed hood with drawstring • Concealed zipper under storm flap with press stud closure • Sleeves with adjustable snap button closure • Two straight pockets. Quality: 50% Polyester, 50% Polyurethane, 210 g/m². Available sizes: XS-5XL. Available colours: Fluo yellow and fluo orange. Complies with: EN 343 3:1, EN ISO 20471 Class 3, EN ISO 14116 and EN 1146-5.
Jacket, 100% polyester, PVC layer, 230 gr / m², fleece lining, concealed hood, fleece lined upper body, print opening, spacious fit, secure pockets, adjustable cuffs through Velcro. In accordance with EN 343 3.1.
Parka in polyester with PU coating FR. Water-and windproof, breathable, reduced chemically resistant, flame retardant and anti-static. Can be combined with a vest or a FR fleece. (Art 1024367). Hood also available. Characteristics: Straight collar, zipper covered under flap, two chest pockets, inside pocket, two patch pockets and 2 loops badges. Available in navy.
100 % waterproof / windproof / highly breathable / water repellent outer fabric / moisture attracting coating on the inside / very comfortable / supple Quality: 100% polyester fabric with 100% PU coating. Available colors: Hi-Viz yellow/Navy. Available sizes: S – 3XL.
Wind and waterproof jacket with taped seams: • 2-way zip with flap covered with a snap closure • double breast pockets with flap and velcro closure • waterproof zippers • loop for badge holder • side pockets lined with fleece • three large inner pockets • removable and adjustable hood • adjustable sleeves with velcro • adjustable waist • extended back Quality: 100% polyester, 200 g / m² Color: Navy, black and gray. Sizes: XS-4XL.
Firefighting jacket in NOMEX® STRIKE, 220g/m², SOFIGUARD treatment with PU FR membrane (145g/m²) and aramid lining (250g/m²). High separate collar, patched radio pocket, microphone loop, zip closure under flap with velcro closure, cuffs with thumbloops, 2 patched pockets with flap and hole loops, torch holder, coated KEVLAR® reinforcements on shoulders and elbows, elongated back, bottom hem finished to prevent water rising, extra internal thermal reinforcements on shoulders and arms. Available colours: navy. Available sizes: S-4XL.
Flame retardant, anti-static hi-vis rain jacket, SIOPOR® Excell: 3-layer fabric: Dobby Ripstop Polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 270 g/m², High performance lightweigth fabric, 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Comfortable, Supple, High tear resistance, Taped seams, Different linings/fleeces can be zipped in, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch <(>&<)> close fastening, 1 patched chest pocket, 2 patched pockets, 1 napoleon pocket, 2 loops for badges, Round inset sleeves, Elastic at end of sleeves with narrowing by touch <(>&<)> close fastening, Back length 85 cm (L), Unlined, 2 inside pockets.
The Torvik is a premium hi-vis rain jacket which protects you against foul weather and the risks of an electric flashover. This supple jacket meets the high standards we set to our products regarding design, innovation and protection. The segmented reflective stripes not only add a modern touch, but also add to the breathability and comfortability of the jacket. The elongated backtail, preshaped sleeve ends and the use of an improved YKK-zipper with handy grip for easily opening and closing the jacket are some features which make this jacket stand out. Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Designed to keep the wearer visible, safe and dry in inclement weather. This lightweight stylish two-tone jacket has the following features: buildable hood, large pockets, vent on the yoke at the back and eyelets for extra ventilation. Available sizes: S-3XL. Available colors: hi-vis yellow / navy, hi-vis orange / navy. Conforms to: EN ISO 20471 Class 2, EN 343 3.3.
Rain set, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams. Jacket: Fixed hood with drawstring, zip under storm flap with popper fastening, adjustable press stud fastening sleeves, 2 straight pockets. Pants: Elastic at the waist, 2 side pockets, adjustable press-stud closure at the bottom of the leg, 3M reflection. Complies with: EN 343, EN ISO 20471 class 2.
Parka 3 in 1, polyester peach PVC coated, 230g / m², anti-pill fleece, 260gr/m², waterproof, 2 pockets with zipper, zipper with flap, removable fleece lining. Collar can be folded in hood.
Rainwear set with jacket and pants in PU quality. • Wind and waterproof • Water column: 11,000 mm Quality: 50% Polyester, 50% Polyurethane, 170 g/m² Available sizes: XXS-5XL. Available colours: Black. Complies with: EN 343.
A light jacket that offers you a very high level of protection, including ARC protection. This hi-vis Kaldvik rain jacket is made out of the new lightweight (280 g/m²) Siopor® Excell fabric. Different linings can be zipped in this soft and supple jacket. Furthermore, the Kaldvik has many practical features like the possibility of attaching a hood (available separately), narrowing the sleeve ends, 1 chest pocket, 2 inside pockets and a practical zipper grip for easily opening and closing the jacket. Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Hi-vis rain jacket / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / High frequency welded seams / Outside: Fixed hood / Zip closure under flap with press studs / 2 patched pockets / Raglan sleeves / Sleeve narrowing by press studs / Underarm ventilation / Back length 85 cm (L) / Fabric: FLEXOTHANE® Classic: / 100% polyamide knitting with PU coating; ± 180 g / m² Colour: 3720A2FC1: FC1 fluo orange3720A2F01: FY1 fluo yellow
Offers protection against electric arcs (class 2). Very lichtweight, flame retardant and antistatic rain jacket in 100% polyester with a highly breathable ePTFE membrane (Gore Pyrad™ technology)(215g/m²). Flameretardant lining in 50% aramid/50% viscose (115g/m²). Zip closure under flap with velcro, 2 front pockets with flap, chest pocket with flap, adjustable cuffs through velcro straps, elongated back, 2 loops for badge, vertical and horizontal reflective striping. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Hi-vis parka: • wind and waterproof • taped seams • good breathability • detachable hood with adjustable rubber cord • two chest pockets with zippers • two front pockets with zip • D-ring in left breast pocket for ID card • three inside pockets • adjustable cuffs Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow / black, fluo yellow / navy and fluo orange / black. In accordance with: EN ISO 20471 class 3.
High visibility winter parka PW3: 5 pockets for more storage; Insulatex lining to reflect heat back into the body, ensuring maximum warmth and comfort; Removable lined hood; Quick-dry knit cuff; Zipped interior pocket; Zip closures under the armpits; Removable badge holder; The drawstring in the hem allows a snug and comfortable fit; Inside pocket. Quality: Industry 300D: 100% polyester, 300D Oxford weave with a stain resistant finish, 190g PU coating. Available sizes: S-4XL Available colors: fluo yellow / black and orange yellow / black. Complies with: EN ISO 20471 class 3 and EN 343 3: 1.
Parka with hidden zipper with hidden snaps, 2 front pockets with flap, 2 inset chest pockets with right chest pocket with D-ring for badge holder, detachable hood with drawstring, zip-in lining is available separately, escape mask loop, cuffs with Velcro, extended back, reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: S-3XL. Available colors: corn blue / navy, gray / blue, black / gray and gray / red. Complies with: EN 1149-5, EN 13034 type 6, EN 343 3: 2, IEC 61482 class 2, EN ISO 11611 class 1 and EN ISO 11612 A1A2.B1.C1.E2.F1.
Parka Gore Tex Diablo multinorm: - 2 front pockets; - 1 napoleon bag; - 1 breast pocket; - 1 inner pocket. Quality: PES / CARBON WITH GORE PYRAD TECNOLOGY Available sizes: XS-3XL. Available colors: Fluo yellow / navy, fluo yellow / gray and fluo orange / gray. Compliant with: EN 343 4:4, EN ISO 20471 class 2/3, EN ISO 11612, EN ISO 14116, EN 13034 type 6, EN 1149-5 and IEC 61482-2 class 2.
Super strong Midi Parka with Cordura on sleeve and yoke piece for extra wear resistance. The Cordura fabric is made from nylon 6,6 fibers and the general feature is that it is resistant to heavy loads. This jacket is extremely suitable for robust outdoor use. Breathable, wind and waterproof with taped seams. Equipped with a double storm flap with a water barrier, a detachable hood, a concealed press stud fastening and an extended back. Warm and comfortable thanks to the inner collar with fixed microfleece and a removable thermal inner jacket. Practical with a vertical breast pocket with laminated zipper, lockable horizontal and vertical side pockets, concealed horizontal breast pockets and a concealed Napoleon pocket. Equipped with an inner pocket with zipper and ID badge and a cable entry for telephone or MP3 player, beard cap and printer zipper. Available sizes: XS-7XL. Available colors: navy, black, kining blue / navy, black / gray and kakhi / black. In accordance with: EN 343 3.3.
Hi-vis parka 3-in-1: • wind and waterproof jacket with removable inner jacket; • outer jacket with a 2-way zip; • reflective details; • vertical breast pockets; • badge holder; • large side pockets; • detachable and adjustable hood; • adjustable waist; • adjustable cuffs with velcro; • lightly padded inner jacket; • side pockets with zip and internal loop; • inside pocket with zip and telephone pocket. Quality: 100% Polyester. Available sizes: XS-4XL. Available colours: Fluo yellow/black, fluo orange/black and fluo yellow/navy. In accordance with: EN ISO 20471 class 3.
Raincoat, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zip under storm flap with press stud fastening, sleeves with press stud fastening, 2 straight pockets. Complies with: EN 343.
Lightweight parka in 100% polyester canvas with PU coating (160g/m²). Zip closure with stormflap on the inside, padded lining, removable hood, reflective piping, 4 exteriour pockets with waterproof zippers, 2 interiour pockets for cellphone, mp3,... and an id-badge, adjustable cuffs by velcro and windbreaker. Available sizes: XS-7XL. Available colours: navy, black, dark grey.
Lined wind and waterproof jacket with taped seams: • 2-way zip with flap covered with a snap closure • double breast pockets with flap and velcro closure • waterproof zippers • loop for badge holder • side pockets lined with fleece • three large inner pockets • removable and adjustable hood • adjustable sleeves with velcro • adjustable waist • extended back Quality: 100% polyester, 200 g / m² Color: Navy, black and gray. Sizes: XS-4XL.
The Vaski is a hi-vis ladies rain jacket which also offers a high degree of protection to the wearer. The jacket is made out of a light, but high quality fabric and complies to many international standards such as IEC 61482-2, EN ISO 11612, EN ISO 11611, EN 1149-5 and EN 13034. This premium jacket is equipped with a YKK zipper with handy grip for easy opening and closing. The sleeve ends are preshaped and the back is extended for your comfort. Available sizes: XS-2XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Stylish and functional Vision Rain jacket makes from a renewed 300D Oxford PU coated durable dirt-repellent fabric. This jacket features many features including a new aluminized Insulatex lining panel, reflecting body heat back to the body for maximum warmth and comfort. Features: Waterproof and taped seams. Lightweight flexible interrupted HiVisTex Pro reflective striping. Texpel dirt-repellent finish. Lined for extra thermal insulation. 4 storage bags and 1 phone pocket. Ergonomically shaped hood. Velcro adjustable cuffs for good fit. Available colors: Hi-Vis yellow/black and Hi-Vis orange/black. Available sizes: XS-3XL.
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: ▪ High in 1 piece upright closing collar with wide closure. ▪ Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. ▪ YKK anti-panic crystal closure with a waterproof flap and velcro closure. ▪ Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. ▪ Pre-formed 3D sleeves with insert. ▪ Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! ▪ Equipped with external elbow protection and reinforced sleeve ends. ▪ The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. ▪ Extended back for better protection.
Multinorm parka with arc protection: Straight collar; YKK zip closure under flap; 1 patched chest pocket; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket; Round sleeves; Flame retardant reflective tape. Quality: 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Multinorm winter parka with taped seams and quilted lining. Completely metal-free. Wind and waterproof. Quality: Cantex 240IR, twill PU-coated membrane, 260 g / m². Available colors: Fluo yellow / navy. Available sizes: XS-4XL. Conforms to: EN 1149, EN 13034, EN 343 4: 1, EN ISO 11611 class 1, EN ISO 20471 class 2, EN ISO 11612, IEC 61482 class 2.
Raincoat, 50% polyamide, 50% polyurethane, 170gr/m², micorflex, high frequency welded seams, fixed hood with drawstring, zip under straw flap with press stud fastening, adjustable press stud fastening sleeves, 2 straight pockets, 3M reflection.
Hi-vis parka with flame retardant lining and filling. Antistatic, high visibility, flame retardant, waterproof and breathable. With hood and several pockets. Quality: 98% Polyester, 2% Antistatic Carbon Fibre, Breathable, PU Coated. Available colours: Navy/hi-vis yellow and navy/hi-vis orange Available sizes: XS-6XL.
Functional jacket: • wind and waterproof • taped seams • good breathability • detachable hood with adjustable rubber cord • two chest pockets with zippers • two front pockets with zip • D-ring in left breast pocket for ID card • three inner pockets • adjustable cuffs. Quality: 100% polyester. Available sizes: XS-4XL. Available colors: Fluo yellow / black, fluo yellow / navy and fluo orange / black.
This stylish jacket is made from 300D Oxford woven fabric and offers maximum water and windproof performance for good year-round protection. This jacket is very flexible and can be worn in three unique combinations, which makes the jacket extremely versatile. Numerous inner and outer pockets provide excellent and safe storage for your personal accessories such as your phone or tablet. A sporty fit and an unobtrusive contemporary design make this the jacket you choose in demanding conditions. Properties: Waterproof and taped seams prevent water from entering Reflective striping to be more visible Detachable sleeves, "fur" lining and "fur" collar for many wearing options Jacket can be worn in three ways for multifunctional use 9 storage pockets Phone pocket Two-way zipper for easy opening Concealed detachable hood for more functionality Radio loop for attaching a radio. Quality: 100% PES. Available sizes: S-3XL. Available colors: fluorescent yellow / black and fluorescent orange / black. Conform: EN ISO 20471 class 3.
Hi-vis parka bicolor: Waterproof, Breathable, Windproof and with reflective striping. Available sizes: XS-8XL. Available colors: fluorescent yellow / navy and fluorescent orange / navy. Conforms to: EN 343: 2003 Class 3: 1, EN ISO 20471: 2013 Class 2.
Lightweight parka in 100% polyester with PU coating (160g/m²). Zip closure with stormflap on the inside, padded lining, removable hood, reflective piping, 4 exteriour pockets with waterproof zippers, 2 interiour pockets for cellphone, mp3,... and an id-badge, adjustable cuffs by velcro and windbreaker. Available sizes: XXS-7XL. Available colours: navy, black, dark grey.
Rainjacket in 100% polyester 300D with PU coating (190g/m²). Zip closure under flap with press-studs, 2 front pockets, radio loop, detachable hood in collar, reflective striping, removable fleece (260g/m²). Available sizes: S-3XL. Available colours: navy. Conforme à: EN 343 3.1.
This jacket is equipped with knitted wind cuffs in the sleeves, two pockets on the inside and two pockets on the outside. The sleeves are removable and this jacket can be fitted with a hood. The breathable, water-repellent outer fabric and moisture-absorbing coating on the inside protect you from wet weather conditions. Available colors: Hi-Vis yellow/Navy and hi-vis orange/navy. Available sizes: S – 4XL.
The Belvill is a breathable, waterproof, optimum visibility raincoat. The moisture-absorbing coating on the inside and the underarm ventilation prevent clamminess. The hood can be tucked away in the collar and the zipper is hidden under a flap with press studs. This water and windproof raincoat has been fitted with two pockets and elastic sleeve ends which can be narrowed with press studs. Available colors: Hi-Viz yellow/Navy and hi-viz orange/navy. Available sizes: S–3XL.
Multinorm parka Beltrum with arc protection: Straight collar; YKK zip closure under flap; 1 inset chest pocket with flap; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket; Round sleeves; Sleeve narrowing; Elastic drawstring in front hem; Elongated back tail. Quality: 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available sizes: S-53XL. Avialable colors: Fluo orange.
Water-and windproof rain jacket with PU coating. 2 slant pockets, 1 chest pocket, 1 sleeve pocket and inside pocket with zip fastening. Zip fastening with stormflap, elongated back and removable lining. Available sizes: XS-7XL. Available colours: hi vis yellow/navy, hi vis orange/navy, hi vis orange/green.
Windproof signalisation raincoat that feels very smooth, light and comfortable. Quality: Flexothane Classic: 100% polyamide knit with PU coating; ± 180 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: S-3XL.
Hi-vis rain jacket ARC protection Class 1, SIO-SAFE Aqua 310: 2-layers laminated tissu: 60% FR modacryl - 40% cotton (<(>&<)> AST) ripstop with PU laminate ± 310 g/m², High performance laminated fabric, Highly breathable, Taped seams, Different linings/fleeces can be zipped in, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch <(>&<)> close fastening, 1 patched chest pocket, 2 patched pockets, 1 napoleon pocket, 2 loops for badges, Round inset sleeves, Elastic at end of sleeves with narrowing by touch <(>&<)> close fastening, Back length 85 cm (L), Fixed flame retardant cotton lining, 1 inside pocket, Zipper in back lining for placing logos.
HI-VIS parka Belenos Gore-Tex: 2 front pockets; 1 napoleon bag; 1 breast pocket; 1 inner pocket. Quality: GORE-TEX® 100% PTFE, PES outer fabric. Available sizes: XS-3XL. Available colors: Fluo yellow / navy in fluo orange / navy. Compliant with: EN 343 3: 3, EN ISO 20471 class 2/3.
The flame retardant and anti-static Belarto is a 3-layer softshell that is perfectly windproof, yet breathable. The softshell, with a standing collar, protects you against the cold. If you get too hot, you can take off the sleeves. The Belarto has on the outside one inset chest pocket and two inset pockets on the side, all with zippers. Inside there is a pocket for storage. The softshell has been fitted with sleeve narrowing with touch and close fastening and narrow reflective FR strips on the arms and chest: Straight collar Zip closure under flap with touch <(>&<)> close fastening 1 inset chest pocket with zip closure 2 inset pockets with zip closure Detachable sleeves Sleeve narrowing by touch and close fastening Flame retardant reflective tape (25mm) Back length 75 cm (L). Quality: 3-layer softshell: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-3XL. Available colours: Navy.
SIP Protection BasePro chainsaw jacket. The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work: Short and straight collar; Zip closure; 2 inset pockets with zip closure; Sleeve narrowing by press studs; Back ventilation; Elongated back tail. Quality: 65% Polyester - 35% cotton outer fabric ± 210 g/m². Available sizes: S-4XL. Available colours: Fluo yellow/black and fluo orange/black.
Rain jacket in light stretch material: • wind and waterproof • taped seams • waterproof front zip • internal storm flap • chin guard • side pockets with zip • segmented tires with stretch • thumb grip on the cuffs • extended back. Quality: 100% polyester, 140 g / m². Available sizes: XS-3XL. Available colors: Fluo yellow / black. Conforms to: EN ISO 20471 class 1.
"Parka, Gore Tex Pyrad TM Fabric Technology, 2-layer laminated in polyester, waterproof, windproof, breathable (WWB). This parka combinest this WWB principle with the highest protection against heat and flame and arc-flash. Permanently anti-static technology. Industrial laundry at 60°C. Available sizes: S-4XL.
GORE-TEX® PARKA MILLENNIA COLLECTION TAILTIU 2 front pockets; 1 napoleon bag; 1 breast pocket; 1 inner pocket. Quality: 100% PES with Gore-Tex membrane. Available sizes: XS-3XL. Available colors: Black and navy. Compliant with: EN343 3: 3.
Multinorm fluo parka with arc flash protection: Flame-retardant treated waterproof cloth; Premium flame retardant reflective striping; Taped seams provide extra protection; FR cotton lining for extra warmth and comfort; 9 storage bags; Detachable hood; Velcro adjustable cuffs. Quality: Modaflame Rain 350g. Available sizes: S-2XL. Available colors: Fluo yellow / navy and fluo orange / navy. Conforms to: EN ISO 11612 A1, A2, B1, C1, E3, F1, EN ISO 11611 class 2 A1 + A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 class 2 APC 2, EN ISO 20471 class 3, EN 13034 Type 6 and EN 343 class 3: 1.
Flame retardant jacket designed to be worn over flame retardant garments. Made from a comfortable, lightweight, highly innovative flame retardant twill fabric Quality: Bizflame Plus: 99% Cotton, 1% Carbon Fiber 210g. Available sizes: S-3XL. Available colors: Navy. Complies with: EN ISO 11612 A1+A2, B1, C1, E2,F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5 and ASTM F1959/F1959M-14e1 ATPV 9.1cal/cm².
Microflex Hi-Vis Raincoat. 50% Polyester/50% Polyurethane, 170 g/m², High frequency welded seams. 100cm long. Fixed hood with drawstring. Zipper under storm flap with press stud fastening. Sleeves with adjustable snap button closure. Two straight pockets. With reflection. Water column: 8000 . Complies with: EN 343 3.1., EN ISO 20471 2.
This premium hooded jacket is made of polyester and cotton. The jacket has a thumb hole at the end of the sleeves to keep it down during intensive activities. In addition, the turtleneck and hood ensure that your neck and head stay warm. Available sizes: XS - 3XL. Available colors: Marine.
