BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Basic fall protection harness with two attachment points: on the back and on the chest. Complete D breast anchor point. Straight leg straps easily adjustable. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Chest and leg straps have quick-release buckles. Straps made of dirt-repellent and abrasion resistant Repel webbing. Harnesses easy to put on. Harness designed that the straps cannot get caught. Built-in fall indicator and 2 built-in anti-trauma straps.
Very light and comfortable fall-protection harness with two attachment points: on the back and on the chest. When the chest attachment point is used, two loops must always be used. Shoulder and leg straps are easy to adjust. Coolmax lining on shoulder and leg straps. Chest and leg straps with quick closure. Harness can be put on very easily. With straight leg straps for greater safety and comfort. With fall indicator Weight: 988 gram.
Fall-protection harness with 2 attachment points: on the back and on the chest. Full D check anchor point. Leg and shoulder bands are easily adjustable. Chest and leg straps have quick-release buckles. Built-in drop indicator. Certified to use in combination with the life jackets Secumar Alpha and Golf.
Double lanyard, 1.5 metre length, consisting of kernmantle rope with integrated shock absorber. Double Lanyard to allow continuous protection, even when switching between two anchor points. Fitted with one standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
Fall-stop device with 2 metre strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Lanyard, 2 metre length, consisting of kernmantle rope of 11mm with integrated shock absorber. Fitted with one standard carabiner and a snap hook with a 65 mm gate opening. Serves as connection between anchor point and harness.
Comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point. Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with quick release. Harness easy to put on. Built-in foot loops to prevent hanging trauma, fall indicator front and back.
Rescue safety harness, easy to put on due to padding, easy-to-adjust straps, with revolving adjuster system on the chest straps, shoulder reinforcements with integrated anti-trauma straps, and large stand-up D-ring on the back, and quick closures. With 2 hooks on the shoulder straps for rescue from enclosed spaces (victim comes straight up), to be used with rescue harness spreader (art.1031078).
Very comfortable Fall arrest harness with 2 mounting points on back and chest. Breast Fixation Point by D-ring. Leg and shoulder straps with quick release, very easily adjustable. Harness very easy to put on due to integrated padding. Universal size.
Lanyard, 2 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Maximum user weight: 140kg
Fall-prevention device, 2,5 metre webbing strap, with integrated shock absorber. Plastic casing. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. With 2 carabiner hooks. Only for vertical use. Weight: 1.27 kg. Max user weight: 140 kg.
omfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools. Sizes: S/M - L/XL.
Fall-prevention device, 10 metre galvanised steel cable, with external shock absorber. Housing made of plastic. Serves as connection between anchor point and harness. For vertical (max 140kg) and horizontal (fall factor 1, max 100kg) use, and suitable to use with sharp edges. Weight: 6.6kg. Dimensions block: 39cm x 17.2cm, width 8.7cm Can be maintained.
Comfortable fall protection harness with 2 attachment points on the back and chest. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Built-in foot loops to prevent hanging trauma.
Fall-stop device, 2,5 metre strap, with integrated shock absorber. Plastic casing. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with snap hook with 65 mm gate opening. Only for vertical use. Weight: 1.64 kg. Max user weight: 140 kg.
Very comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point and positioning belt. Straight leg straps easily adjustable. Shoulder straps adjustable. Tires made of dirt-resistant and wear-resistant webbing. Harness very easy to put on. Built-in fall indicator. Comfort padding on leg straps and hip belt. Maximum user weight including material: 140kg.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Complete D breast anchor point. Leg straps easily adjustable. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Extra lining on shoulder and leg for greater comfort; also easy to put on. Chest and leg straps have quick-release buckles. Standard version with trauma loops on leg straps for deployment after a fall. Harness is very easy to put on. Large stand-up D-ring on the back of the harness.
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with snap hook with 65 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
Rebel fall-prevention device with 15 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from the fall-protection mode to the rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the AM100 tripod via adapter.
fall arrest block, 6 metre webbing strap, with external shock absorber. Housing made of plastic. Rotating snap hook ensures that the webbing strap does not become twisted. Suitable for vertical (max. 140kg) and horizontal (fall factor 1, max 100kg) use, as well as use with sharp edges.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7 kg.
Rebel fall-prevention device with 6 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical use. Can be maintained.
Rebel fall-prevention device with 15 metre stainless steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the AM100 tripod via adapter.
Standard fall harness with straight leg straps and 2 attachment points (back and chest). Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with buckle through buckle closure. Tires made of water and dirt-resistant polyester. Fall indicator front and back.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Harness is very easy to put on. Integrated fall indicator on the front and back, suspension trauma straps and padding on the waist belt.
Lanyard, 1,5 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Max user weight: 140kg.
Inexpensive full body harness with 2 D-ring and pas through buckles. Only shoulder and chest straps are adjustable. Test Weight: 140kg. Universal size.
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with 2 Skalt Comita aluminium hooks with 20 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
Fall-stop device 2 metre kevlar band with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
Very comfortable Fall arrest harness with 2 mounting points on back and chest. Breast Fixation Point by D-ring. Leg and shoulder straps with quick release, very easily adjustable. Harness very easy to put on. Size: XXL. Weight: 1,28kg. Suitable for general industrial applications.
Fall-prevention device, 20 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. . Weight: 7.2kg.
Rebel fall-prevention device with 10 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical use. Weight: 5.6 kg. Can be maintained.
Equipped with 2 textile rescue loops on top of the shoulder straps. Comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point. Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with quick release. Harness easy to put on. Built-in foot loops to prevent hanging trauma, fall indicator front and back.
Fixed anchor point for 1 person. Mounting possible in wall, floor and ceiling. Anchoring D-ring: 12 mm attachment. Can be loaded in 3 directions. During installation, this must be tested at 6kN, this can be done by our fixed fall protection team. Contact us for a tailor-made offer. According to EN795 A.
Fall arrest block Rebel 15 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 7,5kg.
Fall arrest device 1,8 meter webbing with shock absorber and fallindicator. Housing made of plastic (high impact nylon). Stops almo st instantly any vertical downward motion. Serves as connection between anchor point and harness. With 2 twist-lock carbiners. For vertical and horizontal use, specially designed for use in aerial work platforms. Sharp edge tested. Suitable for fallfactors 0,1 and 2. Weight: 1;02kg.
Rebel fall-prevention device with 6 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical and horizontal use. Can be maintained.
Very comfortable fall protection harness with 2 attachment points on the back and chest, positioning belt and D ring at the navel for descent. Full D chest anchor point. Leg and shoulder straps are easily adjustable. Extra lining on shoulder and leg for greater comfort; also easy to put on. Chest and leg straps fitted with quick release belts. Straps made of wear and abrasion resistant Repel webbing. Harness is very easy to put on. Integrated fall indicator.
Safety line 1.5 metre made of kernmantle rope with integrated shock-absorber Serves as connection between anchor point and harness.
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
Equipped with 2 large self-closing aluminum hooks and 1 auto-lock aluminum hook. Easy to visually inspect due to the contrasting color stitching. Maximum user weight incl. tools: 140kg.
Comfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools.
Mobile anchor point made of sharp edge tested webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 2 metre. Anchor point for protection of 3 persons with a maximum weight of 300kg.
I-beam trolley for I-beams ranging from 9 to 35.5 cm. Maximum thickness of beam 3.2 cm. For horizontal use. Suitable for 1 person with max weight (gear included: 140kg). Atex approved. Can be used in combination with a safety line or fall-block.
Equipped with 2 large self-closing aluminum hooks (23kN) and 1 standard aluminum hook (25kN). Easy to visually inspect due to the contrasting color stitching. Maximum user weight incl. tools: 140kg.
Harness with two attachment points: on the back and on the chest. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
all arrest block Rebel 30 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13,4kg.
Safety harness with 2 anchor points, adjustable shoulder and leg straps. Equipped with automatic buckles. Shoulder and thigh straps are color-coded. Max. user weight incl. equipment: 140kg.
Very comfortable positioning harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Extra lining on shoulder and leg straps for greater comfort and ease. Chest and leg straps fitted with quick release facility with lock. Standard version with trauma loops on leg straps for deployment after a fall. Harness is very easy to put on. Integrated fall indicator.
Lanyard, 2 metre length, consisting of elastic strap with integrated shock absorber. Fitted with two standard carabiners. Max. user weight: 140kg.
Fall-prevention device, 25 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7.4 kg.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Also useful for fall factor 2 (horizontal).
Double fall-stop device 2 metre strap with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
Floor base for davit arm with boom. For permanent attachment to concrete or a metal construction. Opening for davit fitted with hard PVC sleeve to allow davit arm to pivot more smoothly. W 30,48 x L 30,48 x H 24.1 cm. Other floor bases or a mobile base for the davit arm are available on request.
Atex fall arrest block with steel cable and integrated rescue winch. Can be attached to tripods 1063976/1062545 using adapter 1063981. Maximum user weight: 140 kg (vertical use).
Fall arestor 10-metre stainless steel cable, fully sealed housing, suitable for use in extreme weather conditions. With stainless steel musketon with fall indicator, convenient handle. Suitable for vertical use only. Max user weight: 140kg
Fall harness with 2 anchor points and integrated hiviz orange safety vest with refelctive straps. Maximum user weight: 140kg.
Fall arrest block Rebel 20 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage.Weight: 10kg.
Fall arrest block in a 3.5m strap, sharp-edged, tested, with external shock absorber. Suitable for vertical and horizontal use and for a maximum user weight of 140kg.
Aluminum tripod with two anchor points and one pulley in the head, adjustable height from 1.52m to a maximum of 2.9m. Weight: 15kg. Max. capacity: 500kg. Equipped with a built-in winch mount and supplied in a convenient carrying bag.
- Fall arrest device 6 meter strap 25mm - With internal fall damper - Carabiner with fall indicator - Plastic housing - Weight: 2.33 kg - Max user weight: 140kg
Aluminum tripod with two anchor points and one pulley in the head, adjustable height from 1.15m to a maximum of 2.15m. Weight: 13kg. Max. capacity: 500kg. Equipped with a built-in winch mount and supplied in a convenient carrying bag.
Fall-stop device 2.5 metre cable with integrated shock absorber with scaffolding hook on side with fall indicator. Suitable for extremely sharp edges. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Fall arrest block Rebel 25 metres galvanized stainless steel cable with integrated shock absorber. Thermoplastic housing. Almost immediately stops any vertical fall. To be used as connection between fixation point and harness. Ergonomic carrying handle and built in fall indicator hook allows you to see if a fall has taken place. For vertical usage. Weight: 13kg.
Fall-prevention device with 6 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Locking mechanism remains blocked even if there is a recoil effect after the fall (ideal for use with horizontal lifelines). Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical and horizontal use; if horizontal: 2-metre anchor loop must be used (Art. 1026475).
Davit mast 533 mm, to be combined with boom, base, fall-block and/or descent winch and accessories.
Fall arrest device Rebel 12 meters galvanized steel cable with integrated shock absorber. Plastic housing. Stops any vertical falling movement almost immediately. Serves as a connection between anchor point and harness. Equipped with ergonomic cable handle and carabiner with fall indicator that allows you to know when a fall has occurred. For vertical <(>&<)> horizontal use.
