Shopping basket

There are no products in your shopping basket.

Back to overview

71 products found

Filter products

Remove selection

Results for

Prijsklasse

to
  • (71)

Status

  • (4)
More
Less

Products

71 products found
Filtered on: All catalogues Nitrile
GLOVE WINTER PRO

Glove winter pro

Brand: ROSTAING
Prod. No. 1025732

Winter knitted polyamide glove in black colour. Complete coating in nitrile foam. Hand palm with nitrile dots. Foodapproved.Length 26 cm. Sizes: 7 - 11.

 
GLOVE DEXLITE TECHCUT NITRIL THERMO

Glove dexlite techcut nitril thermo

Brand: GSA
Prod. No. 1038455

Cut resistant (HPPE) winter glove, completely seamless grey knit gloves with black nitrile coating. Inside warm winter lining. Glove combines dexterity with high cut-resistance and good protection against cold. Sizes: 8/9/10/11.

 
GLOVE NITROGRIP LIGHT

Glove nitrogrip light

Brand: GSA
Prod. No. 1017936

Nitrile coated gloves with a tricot cuff that fits closely around the wrist. Nitrogrip Light is extremely supple to wear and provides both fine tactility and a good grip. Sizes: 8 / 9 / 10.

 
GLOVE DEXLITE WINTER

Glove dexlite winter

Brand: GSA
Prod. No. 1044815

Winter glove with a gray nitrile coating and warm acrylic lining. This glove is fully coated wiith a high dexterity and outstanding wearing comfort. Unique glove that can be used widely since it combines different levels of protection. It offers basic protection against cutting risks (level B), but can also be used for short contact with hot objects up to 100 ° C (EN407) and for work in cold environments (EN511). Use for general applications in colder environments. Available sizes: 7/8/9/10/11. In accordance with EN388 2016: 4.2.3.2.B, EN407: X1XXXX and EN511: 020

 
GLOVE NITROGRIP

Glove nitrogrip

Brand: GSA
Prod. No. 1017935

Secure grip gloves with nitrile coating. The liquid repellent nitrile coating sheds oil, grease and dust. The open cotton back of the glove provides extra ventilation. Sizes: 9 / 10, with 7 cm protective cuff.

 
GLOVE GUIDE 654

Glove guide 654

Brand: GUIDE
Prod. No. 1043221

Thin black work glove with blue nitrile coating on a seemless nylon liner. Approved for food contact. A close fit, breathable and co mfortable glove.

 
GLOVE GUIDE 662W

Glove guide 662w

Brand: GUIDE
Prod. No. 1042469

Durable gloves for all extended tasks in cold conditions. 3/4 nitrile coating on seemless polyester lining. Completlely lined with acryl. Sizes: 7 / 8 / 9 / 10 / 11.

 
IMPACT GLOVE RINGERS R065

Impact glove ringers r065

Brand: ANSELL
Prod. No. 1048065

Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Half nitrile coating on the palm with sand grain finish for extra grip. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.D.P

 
GLOVE GUIDE 578 ESD

Glove guide 578 esd

Brand: GUIDE
Prod. No. 1046665

Light and thin glove made of seemless knitted nylon/carbon fibre with micropourous nitrile coating. Especially for touch-screen and ESD applications. Sizes: 6-11.

 
GLOVE DEXLITE NBR FOAM BLACK KC

Glove dexlite nbr foam black kc

Brand: GSA
Prod. No. 1007137

A glove with high finger sensitivity provided with a nitrile foam coating on a dark gray medium gray nylon. Made upon the principle: Hybrid Coating Technology. Resistance abrasion perfect and very comfortable to wear. The lining extends to the joints (knuckle coated = KC). The glove is also Oil fugue, more resistant than the PU and is also more resistant when heating the PU. Ideal for any activity where sensitivity in the fingers is necessary as the assembly, assembly, packaging, automotive, etc.. Sizes available: 7-11.

 
GLOVE TEMP-DEX 720

Glove temp-dex 720

Brand: MAPA
Prod. No. 1022961

Finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 250°C for 15 sec. Gloves GS industry.

 
GLOVE IMPACT A722

Glove impact a722

Brand: PORTWEST
Prod. No. 1032359

Impact resistant glove with cut-resistant liner and nitrile coating. Sizes: 7 (s)- 12 (3xl)

 
GLOVE GUIDE HXFIBR 6609

Glove guide hxfibr 6609

Brand: GUIDE
Prod. No. 1054543

Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides good grip. Impact-resistant backhand, 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level E, approved for contact heat level 1. ESD approved and food safe. Oeko-Tex approved. Touchscreen. Sizes : 6-12.

 
GLOVE HYFLEX 11-423 (P3000)

Glove hyflex 11-423 (p3000)

Brand: ANSELL
Prod. No. 1023493

Industrial protective glove. Synthetic textile liner with a synthetic coating. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF- free, antistatic and food approved. Sizes: 6-11.

 
GLOVE HYFLEX 11-925

Glove hyflex 11-925

Brand: ANSELL
Prod. No. 1034538

The first ultra-light weight HyFlex® style to combine a ¾ dip geometry, oil repellence and oil grip into a highly dexterous, high comfort glove. The HyFlex® 11-925 features Ansell’s proprietary grip technology providing reduced risk of slippage in dynamic environments. The liner is constructed with fine gauge nylon/spandex yarn providing the user with an unrestricted second skin feel. This unique blend of protection, performance and flexibility features bridges the gap from previous generations of ¾ dip oil repellent general purpose gloves, delivering enhanced flexibility, tactility, oil grip and extreme comfort.Sizes: 6- 11. In line with EN388 3.1.1.1.

 
GLOVE GUIDE 580

Glove guide 580

Brand: GUIDE
Prod. No. 1027879

Thin work glove with a microporous nitrile foam coated palm. This ensures a very good dry grip and protects against moisture. Oeko-Tex approved. Resistant to contact heat up to 250°C (for 15s). Sizes 5-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.2.X.X.X.X

 
GLOVE NITRIL GRIP I

Glove nitril grip i

Brand: GSA
Prod. No. 1007201

Gloves with blue nitrile layer on a jersey lining, palm coating and tricot cuff. Excellent abrasion and cut resistance and very good grip when working with oil and greases. Flexible, comfortable and ideal for use in automotive, construction and metal working indus tries. Application: heavy working conditions. Sizes: 8-10.

 
GLOVE GUIDE 330

Glove guide 330

Brand: GUIDE
Prod. No. 1052886

Extra thin (18gg) cut resistant glove that keeps the user cool all day long. High dexterity, nitrile coating on the palm and fingers. Approved for use in contact heat up to 100°C (15sec) with reinforced thumb grip and touch screen compatible. Sizes: 6-12. Complies with: EN388:2016 4.X.4.3.C, EN407 X.1.X.X.X.X

 
GLOVE GUIDE HXFIBR 6605

Glove guide hxfibr 6605

Brand: GUIDE
Prod. No. 1052732

Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating ensures for a good grip. 13 gg liner and extra reinforcement along the thumb and index finger. Very high level of cut protection, approved for contact heat up to 100°C (15sec). Approved for ESD environments and food safe for all types of food. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X

 
GLOVE ACTIVARMR HYLITE 47-402

Glove activarmr hylite 47-402

Brand: ANSELL
Prod. No. 1007191

 
GLOVE GUIDE 329

Glove guide 329

Brand: GUIDE
Prod. No. 1044491

Seamless knitted cut resistant glove in polyethene and basalt fibres. Coated completely with nitrile that makes the glove water repellent. With nitrile foam coating on the palm for optimal grip in oily and durty conditions.Sizes 7 - 11.

 
GLOVE HYFLEX 11-571

Glove hyflex 11-571

Brand: ANSELL
Prod. No. 1056371

Ultra-lightweight design (20% lighter than standard CUT D), without the addition of aggressive materials. 3x greater cut resistance (compared to other gloves made from the same material) using INTERCEPT cut resistance technology. 20% greater abrasion resistance thanks to FORTIX technology. Touchscreen, antistatic, EN16350, FOOD APPROVED.
Sizes: 5-12
Complies with: EN388: 4X43D, EN407: X1XXXX

 
GLOVE GUIDE HXFIBR 6611W

Glove guide hxfibr 6611w

Brand: GUIDE
Prod. No. 1057428

Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility, brought together in a winter glove.

 
GLOVE TEMP-DEX 710

Glove temp-dex 710

Brand: MAPA
Prod. No. 1021851

Very finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 100°C for 15 sec. Sizes 7/ 9/ 11.

 
GLOVE ACTIVARMR HYCRON 27-607

Glove activarmr hycron 27-607

Brand: ANSELL
Prod. No. 1007184

 
GLOVE GUIDE HXFIBR 6604FA

Glove guide hxfibr 6604fa

Brand: GUIDE
Prod. No. 1061376

Cut resistant glove on seamles knit liner in renewed HXFIBRE (18 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 12.

 
GLOVE GUIDE HXFIBR 6606
New item

Glove guide hxfibr 6606

Brand: GUIDE
Prod. No. 1047725

Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With extra long cuff. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.

 
GLOVE DEXLITE EDGE THERMO
New item

Glove dexlite edge thermo

Brand: GSA
Prod. No. 1054487

Cut resistant glove for cold applications. This soft, flexible and breathable glove, with nitrile coating, had as enhanced grip in wet and dry conditions. Highest cut protection (level F) and protection against short contact with temperatures up to 250°C. Soft inside acrylic terry liner in hi-viz orange. Glove can be used in extreme cold applications, cold storage, metal fabrication and general maintenance. EN388: 4X43F / EN407: X2XXXX / EN 511: X10

 
GLOVE GP-KV2R

Glove gp-kv2r

Brand: SHOWA
Prod. No. 1007254

 
GLOVE GUIDE 6330 CPN

Glove guide 6330 cpn

Brand: GUIDE
Prod. No. 1025081

A supple glove with cut, puncture and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and the fingertips from needles and sharp objects. Knitted of HDPE cut-resistant fibre, which gives the whole glove cut protection level 5 according to EN 388. Liquid-proof all the way down over the knuckles, making them suitable for e.g. cleaning and wet/oily work. Extremely durable dipping. In conformity with: EN388:2016 4.X.4.3.F

 
GLOVE NITRIL GRIP LIGHT

Glove nitril grip light

Brand: GSA
Prod. No. 1007203

Gloves with a yellow nitrile layer on interlock lining. Coated palm, open back, tricot cuff. Good grip and abrasion resistance. Ideal for light work and in warm environments.

 
GLOVE RINGERS R840

Glove ringers r840

Brand: ANSELL
Prod. No. 1057391

Highly abrasion resistant nitrile coating on a nylon-spandex liner, with impact TPR protection on the back of the hand and fingers.

 
GLOVE GUIDE XLNT 9501
New item

Glove guide xlnt 9501

Brand: GUIDE
Prod. No. 1047674

 
GLOVE NITRIL GRIP II

Glove nitril grip ii

Brand: GSA
Prod. No. 1007202

Gloves with blue nitrile layer on a jersey lining. Palm coating and safety cuff. Excellent abrasion and cut resistance, very good grip when working with oil and greases. Flexible, comfortable and ideal for use in automotive, construction and metal working industries. Application: heavy working conditions. Sizes: 8-10.

 
GLOVE GUIDE XLNT CUT 9508

Glove guide xlnt cut 9508

Brand: GUIDE
Prod. No. 1052707

Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The glove is fully coated with a double coating layer in the palm, for adequate protection against liquids and oils. Approved for contact with all types of food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X

 
GLOVE GUIDE HXFIBR 6608

Glove guide hxfibr 6608

Brand: GUIDE
Prod. No. 1052209

Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. Oeko-Tex standard 100. DMF free, with impact protection on the back of the hand. Sizes 6 - 11.

 
GLOVE GUIDE HXFIBR 6612

Glove guide hxfibr 6612

Brand: GUIDE
Prod. No. 1057427

Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility.

 
GLOVE ACTIVARMR HYCRON 27-805

Glove activarmr hycron 27-805

Brand: ANSELL
Prod. No. 1007185

 
GLOVE GUIDE HXFIBR 6616 IMPACT

Glove guide hxfibr 6616 impact

Brand: GUIDE
Prod. No. 1061182

Flexible and close-fitting glove made of Guide HXFIBR material that offers cut protection and excellent dexterity. With nitrile coating on the palm for good grip, with high-visibility orange TPR/TPU impact protection on the back.
Sizes: 6 to 12
Compliant with: EN388: 4X42DP, EN407: X1XXXXX, EN16350, EN 61340-5-1

 
GLOVE GUIDE HXFIBR 6603

Glove guide hxfibr 6603

Brand: GUIDE
Prod. No. 1053869

Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating provides a good grip. 15 gg liner and extra reinforcement along the thumb and index finger. Cut protection level D, approved for contact heat up to 100°C for max.15 sec. Approved for ESD and food safe. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.D, EN407: X.1.X.X.X.X

 
GLOVE TEGERA 683A

Glove tegera 683a

Brand: TEGERA
Prod. No. 1041405

Synthetic glove, Nitrile, 3/4 dipped, Acrylic, Polyester, 10 gg, 13 gg, Sandy finish, Cat. II, Yellow high-viz, black, High-viz colour, Water and oil repellent palm and knuckle, for allround work . EN 388:2003, 4331 EN 511:2006, 02X

 
GLOVE GUIDE XLNT CUT 9505

Glove guide xlnt cut 9505

Brand: GUIDE
Prod. No. 1052702

Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The nitrile coating in the palm provides excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 5-11. Complies with: EN388:2016 4.X.4.3.C, EN407: X.1.X.X.X.X

 
GLOVE HYFLEX 11-919 (N1700)

Glove hyflex 11-919 (n1700)

Brand: ANSELL
Prod. No. 1017930

Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.

 
GLOVE WG-500R FLEX

Glove wg-500r flex

Brand: WONDERGRIP
Prod. No. 1060078

Soft flexible liner offering suppleness and dexterity. Excellent tactile sensitivity with superior comfort. Anatomically engineered, reducing hand fatigue and increasing comfort. Excellent grip performance for safe handling in dry-to-oily applications. Sizes: 7-11. Complies with: EN388:2016 4.1.3.1.X

 
GLOVE GUIDE XLNT 9504

Glove guide xlnt 9504

Brand: GUIDE
Prod. No. 1048093

Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and supple model (18 gauge) has a double coated palm for total liquid protection. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and touchscreen function. Sizes: 7-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X

 
GLOVE GUIDE XTRM 9404W

Glove guide xtrm 9404w

Brand: GUIDE
Prod. No. 1054479

Chemical glove for precision and medium duty work in cold conditions. Dipped in a two-layer liquid proof NBR/PVC blend. 35 cm long safety cuff. 18gg nylon liner combined with an acrylic winter lining for cold environments. Sizes: EN388:2016 4.1.4.1.X, EN511: 0.2.1, EN407: X.2.X.X.X.X, EN ISO 374-1:2016 Type A: JKLMNOPT, EN ISO 374-5:2016 Virus

 
GLOVE HYFLEX 11-581

Glove hyflex 11-581

Brand: ANSELL
Prod. No. 1060892

Ultra-light glove 21 gauge for unparalleled comfort and dexterity with very high cut protection (F).

 
IMPACT GLOVE RINGERS R068

Impact glove ringers r068

Brand: ANSELL
Prod. No. 1048066

Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P

 
GLOVE GUIDE 9511

Glove guide 9511

Brand: GUIDE
Prod. No. 1060636

Chemical glove for precision and medium-heavy work. Immersed in a two-layer liquid-tight Nitrile using our XLNT technology. 35 cm long safety cuff. 18gg liner for high fingertip sensitivity in difficult environments. Type A chemical protection. Food approved and Oeko-tex certified.
EN388:2016 4X43C EN407: X1XXXX EN374-1:2016: AJKLMNOT

 
GLOVE VIBRAGUARD 07-112

Glove vibraguard 07-112

Brand: ANSELL
Prod. No. 1007199

Supple, wear resistant, silicon-free gloves made of nitrile coated gel foam with lining of knit cotton and rubber inner layer to dampen vibrations. Reduces susceptibility to hand-arm vibration syndrome (HAVS) during industrial activities to an absolute minimum. With Velcro closure.

 
GLOVE TEGERA 8834

Glove tegera 8834

Brand: TEGERA
Prod. No. 1060341

Soft and comfortable winter lined knitted glove suitable for versatile work in semi-wet and slightly oily environments. Nitrile fully dipped with sandy finish on palm and with touchscreen function. Withstands contact heat up to 250°C/482°F. More effective energy usage in combination with use of solar energy in the production has reduced the CO2 emission by 60g/2.1 oz/pair. More effective laundry process has reduced the water usage by 70% (6 liter/1.6 gal per pair).. Sizes 6-12. Complies with: EN388:2016 4.2.3.2.A, EN407: X.2.X.X.X.X, EN511: 0.2.X

 
GLOVE TEGERA 7363

Glove tegera 7363

Brand: TEGERA
Prod. No. 1049209

Chemical and cut protection glove, 0,3 mm, Nitrile, sandy finish. Fully-lined, 18 gauge polyester, nylon, glass fibre thread, spandex. Oil and grease resistant, for allround work.

 
GLOVE GUIDE XTRM 9405

Glove guide xtrm 9405

Brand: GUIDE
Prod. No. 1054480

Chemical resistant glove with cut protection for precision and medium duty work with cut risk. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 15gg para-aramid lining. Sizes: 7-12. Complies with: EN388:2016 4.X.4.1.C, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 Virus.

 
GLOVE GUIDE HXFIBR 6607

Glove guide hxfibr 6607

Brand: GUIDE
Prod. No. 1052737

Flexible, well-fitting work glove made of Guide HXFIBR™ fibers (13gg) that combine very good cut protection with dexterity. The liquid-tight nitrile coating of the glove ensures for protection against liquids in the palm and protects the knuckles on the top. Touchscreen function and extra reinforcement on the thumb and index finger. Approved for contact heat up to 100°C (15sec.) and suitable for contact with all types of food. Sizes: 7-11. Complies with: EN388:2016 4.X.4.3.F, EN407: X.1.X.X.X.X

 
GLOVE TEGERA 450

Glove tegera 450

Brand: TEGERA
Prod. No. 1041309

Cut resistant glove, Nitrile, Palm-dipped, CRF® Technology, Glass fibre thread, Nylon, Polyester, Spandex, 13 gg, Foam grip pattern, Cut resistance level 5, Cat. II, Black, Water and oil repellent palm, for fine assembly work. EN 388:2003, 4544

 
GLOVE GUIDE HXFIBR 6610W

Glove guide hxfibr 6610w

Brand: GUIDE
Prod. No. 1052854

Flexible, tight-fitting winter work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides a good grip. 15 gg liner combined with a 7 gauge acrylic inside lining for cold protection. Cut protection level F, approved for contact heat upt to 250°C (15sex) and food safe. Oeko-Tex approved and ESD tested. Compatible with Touchscreens. Sizes:7-12.

 
GLOVE TEGERA 7361
New item

Glove tegera 7361

Brand: TEGERA
Prod. No. 1053010

Chemical protection glove, fully lined, 0,3* mm (*chem-layer) nitrile, fully dipped, sandy finish, 18 gg, nylon, oil and grease resistant, water and oil repellent, for allround work. Suitable for contact with foodstuffs, except for fatty foods. CAT III . In line with : EN 388:2016 4121X, EN 407:2004 X1XXXX, EN ISO 374-1:2016/Type A AJKMNOPT, EN ISO 374-5:2016/Virus .

 
GLOVE KRYTECH 395 (EX KRONITPROOF)

Glove krytech 395 (ex kronitproof)

Brand: MAPA
Prod. No. 1007251

Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.

 
GLOVE WG-1855HY U-FEEL

Glove wg-1855hy u-feel

Brand: WONDERGRIP
Prod. No. 1046937

Very light and ultra comfortable all round glove constructed on a 18-gauge polyester and spandex liner with thin and smooth protective nitrile coating. Offers heat protection up to 100°C during 15sec. Ideal for precision work. Food approved. Touch screen fonctionality. High visibility yellow. Sizes : 7 (S) - 11 (XXL)

 
GLOVE HYFLEX 11-542

Glove hyflex 11-542

Brand: ANSELL
Prod. No. 1042437

Extreme comfort and protection in high cut risk applications for increased compliance and an uninterrupted workday. The Intercept™ Cut resistant Technology provides high levels of protection against lacerations. Lightest weight design for comfort and dexterity, su pporting worker use compliance. High abrasion resistance delivers longer product use life. Suitable for use across a wide range of applications and risks, avoiding the need to change gloves when transitioning between tasks. Intermittent handling of hot work items up to 100°C. Latex and Silicone free. Sizes: 6-11.

 
GLOVE GUIDE HXFIBR 6615

Glove guide hxfibr 6615

Brand: GUIDE
Prod. No. 1059414

Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. Touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. DMF free, with impact protection on the back of the hand. Sizes 6 - 12.

 
GLOVE TEGERA 186

Glove tegera 186

Brand: TEGERA
Prod. No. 1059484

 
GLOVE HIGH PRESSURE CLEANING

Glove high pressure cleaning

Brand: TST
Prod. No. 1024613

Carrier: Nylon / Dyneema® with roughened nitrile coating. Nylon inner glove for better comfort. Waterproof. Protection up to 500BAR. Sizes: 9 and 11. In line with EN388: 4.5.4.4

 
GLOVE HYFLEX 11-427 (P3000TROPIQUE)

Glove hyflex 11-427 (p3000tropique)

Brand: ANSELL
Prod. No. 1032010

Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Antistatic, silicone-free and DMF-free.

 
GLOVE GUIDE XLNT 9502

Glove guide xlnt 9502

Brand: GUIDE
Prod. No. 1052701

Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and flexible model (18 gauge) has a liquid-tight palm and an airy top. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and is touchscreen compatible. Sizes: 6-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X

 
IMPACT GLOVE RINGERS R085

Impact glove ringers r085

Brand: ANSELL
Prod. No. 1048748

Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Nitrile coating on the palm with sand grain finish for extra grip. Fleece lining for extra warmth in cold temperatures. Reinforced thumb hole to reinforce high-wear areas. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.F.P

 
GLOVE COLLIDE-X³ 68-9320

Glove collide-x³ 68-9320

Brand: TILSATEC
Prod. No. 1063216

Impact glove with new and unique KOROYD impact protection technology. An optimized PU elastomer absorbs and distributes the impact energy through its unique construction, reducing the load on critical parts of the hand. Advanced and increased impact protection: ANSI/ISEA level 3. Extremely suitable for heavy environments.
18 gauge, Nitrile-PU foam coating. Reinforced thumb attachment. Touchscreen. Sizes: 7-12.
Conforms to: EN388:2016: 4.X.4.3.F.P

 
GLOVE HYFLEX 11-926

Glove hyflex 11-926

Brand: ANSELL
Prod. No. 1032091

 
GLOVE TEGERA PRO 422

Glove tegera pro 422

Brand: TEGERA
Prod. No. 1063141

Impact resistant glove for demanding environments.
Large back coverage. Touchscreen. High visibility colours for improved hand gestures.
Conforms to EN388:2016: 4.X.4.3.D.P, EN407:2020: X.1.X.X.X.X

 
GLOVE HYFLEX 11-591

Glove hyflex 11-591

Brand: ANSELL
Prod. No. 1063259

Ultralight design: 20% lighter. 13 gauge. Enhanced Fortix® technology: 20% more abrasion resistance. 12 times higher cut resistance (vs. standard HPPE) using Next Generation single strand HPPE yarn developed with INTERCEPT(TM) cut resistance technology. Nitrile coating.
Oeko-Tex certification. Food approved. Sizes: 6-12. Conforms to: EN388:2016: 4.X.4.3.F. EN407: X.1.X.X.X.X

 
GLOVE DURANIT-FITCHOC

Glove duranit-fitchoc

Brand: ROSTAING
Prod. No. 1065365

Glove with high cut protection and impact protection. Nitrile coating. Very fine knit, 0.85 mm. 18 gauge. Touchscreen on all fingers. Thumb cavity reinforcement.
Sizes: 6-12
Complies with: EN388:2016 4X43FP