BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
The Evolution® Safety Helmet Cooling Sweatband is powered by HyperKewl™ PLUS evaporative cooling material. A unique fabric that absorbs and slowly releases water through evaporation, thereby protecting the wearer against heat stress for up to 10 hours. Fits JSP helmets with slip adjustment Sold per set of 10 pieces. Not separately approved as PPE.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Normal peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, green, blue, red, orange.
Comfortable fire retardant bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. Protective liner is removable. Size: 53-63cm.
Sweatband, made out of Chamlon. Is PH-neutral. Suitable for Evo helmets with slip ratchet (Does not fit Evo8).
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-64cm.
Face shield in clear polycarbonate, length 200 mm. For use on EVO safety helmets. Marking: 1 B 3 9.
Visor carriers allow use of faceshields with helmets. Clips into universal slot ear defender housing for the Evolution® range.
Face shield in clear acetate, length 200 mm. For use on EVO safety helmets. Marking: 1 F 3.
Dark grey hearing protector with HiViz green element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
4-point chin strap for helmets EVOlite®, EVO® 2/3/4/5/8. Meets the requirements of EN 397 and EN 14052 when worn with the appropriate JSP EVO® helmet.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Short peak (50mm). With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-64cm.
Comfortable winter bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Safety helmet made out of ABS with integrated visor. Has a 6-point textile cradle (53-64cm). Available in: white.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, blue
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, blue.
Safety helmet made out of PE. Has a 6-point polyethylene cradle (53-63cm). Available in: white, yellow, blue, green, red, orange. Su itable for: general industrial applications.
Safety helmet made out of PE with standard peak. Has a 6-point textile cradle (53-64cm) with slip ratchet. Has a Chamlon sweatband.
Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with slip ratchet. Has a Chamlon sweatband.
Safety helmet made out of PE with standard peak. Has a 6-point textile cradle (53-64cm) with wheel ratchet. Has a Chamlon sweatband.
Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with wheel ratchet. Has a Chamlon sweatband.
6-point suspension in textile with slip ratchet and sweatband for helmets EVO-range. No PPE.
Dark grey hearing protector with HiViz orange element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
Dark grey hearing protector with HiViz red element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
Face shield in clear polycarbonate, length 175 mm. For use on EVO safety helmets. Marking: 1 B 3 9.
Face shield in clear acetate, length 175 mm. For use on EVO safety helmets. Marking: 1 F 3.
Chin piece S91C, suitable for attachment to face shield Surefit 175mm PC (1055809) and CA (1055811).
Face shield in clear polycarbonate, length 185 mm. For use on EVO safety helmets. Marking: 1 AT 3 9.
Face shield in clear polycarbonate, length 185 mm. For use on EVO safety helmets. Marking: 1 AT 3 9 KN.
Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 9 KN.
Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 8-1-0 9 KN.
Face shield in black woven nylon mesh with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 65%.
Face shield in black woven stainless steel with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 70%.
Face shield in black etched stainless steel with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 80%.
The Browguard with rotary knob allows you to mount a wide range of face shields. For example, we can offer the face shields C1 (185m polycarbonate) / C2 (185mm polycarbonate anti-fog <(>&<)> anti-scratch) / C4 MAX (215mm polycarbonate anti-fog <(>&<)> anti-scratch) / C5 MAX (215mm polycarbonate anti-fog <(>&<)> anti-scratch). scratch + arc flash).
The Browguard with rotary knob allows you to mount a wide range of face shields. For example, we can mount the face shields M1 (nylon wire mesh) / M2 (woven stainless steel) / M3 (etched stainless steel).
Polycarbonate replacement visor, for the EVO VistaShield helmet.
Safety helmet made out of ABS with integrated spectacle. Has a 6-point textile cradle (53-64cm). Available in: white, white/smoke.
Safety helmet made out of ABS with integrated spectacle. Has a 6-point textile cradle (53-64cm). Compatible with (1038817 KINRIEM 4-PUNTS VR EVOLITE/EVO). Available in: white, blue, red, white/smoke, blue/smoke, black/smoke, orange smoke and green/smoke.
Yellow HiVIz full head and face cold weather safety helmet comforter. Compatible with MK®7 / EVOLite® / EVO®2 / EVO®3 / EVO®5 / EVO®8. No PPE.
Lining that fits between cradle and helmet shell for full integration. Compatible with MK®7 / EVOLite® / EVO®2 / EVO®3 / EVO®5 / EVO®8. No PPE.
Winter cap. 80% cotton, 15% polyester, 5% Spandex. Sizes: M/L. Color: HiViz orange. No PPE.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm) with integrated 4-points chinstrap. With the ability to change between the two standards easily at the flick of a switch making the harness either 'strong' or 'weak'. 1000Vac approved. Available in: white.
Face shield in grey polycarbonate, length 340mm. For use on EVO5 safety helmets. Marking: 1 B 8-2-2.
Polycarbonate replacement spectacle, for the EVO VistaLens helmet.
6-point suspension in textile with wheel ratchet and sweatband for helmets EVO-range. No PPE.
Sweatband, made out of Chamlon. Is PH-neutral. Suitable for Evo helmets (Does not fit Evo8).
Extra long sweatband, made out of Chamlon. Is PH-neutral. Suitable for Evo helmets (Does not fit Evo8).
6-point suspension in polyethylene with slip ratchet and sweatband for helmets EVO2. No PPE.
Reflective stickerset of 10 pieces for the Evolite helmet. No PPE.
Reflective stickerset of 10 pieces for the Evo2/3 helmet. No PPE.
Overshoes, polyethylene (30 micron) measurement: 41cm x 15 cm. Thickness: 30 micron. Available in: blue.
These supple and comfortable outdoor gloves are made of water repellent cowgrain leather and fitted with an efficient and elastic 5 cm cuff. Sizes: 9 / 10.
Overshoes, CPE, heavy version (90 micron, one size. Available in: blue. Package containing 50 pieces. No PPE.
Hairnet, polypropylene, flap, covers the ears. Available in: White.
Gloves made of sturdy, top-quality cowgrain leather with wplit leather back. Has a perfect fit, reinforced seams along the fingers and high tactility.
Very comfortable high cut resistant (cut class E) glove with a gray PU coating. Highest dexterity (18 gauge). Ideal for dry applications in disassembly, handling of objects with sharp edges. Touch screen functionality. According to EN388: 4.X.4.2.E
Secure grip gloves with nitrile coating. The liquid repellent nitrile coating sheds oil, grease and dust. The open cotton back of the glove provides extra ventilation. Sizes: 9 / 10, with 7 cm protective cuff.
Cut resistant glove without seams with silicon-free PU coating. Wrist and forearm protection thanks to a long 15 cm cuff. The coating gives a very good grip in work requiring good dexterity in dry conditions. The glove liner is a combination of HPPE, fiberglass and nylon, and has, due to very dens knitting, a very high cut resistance. Usage: Situations where adhesion, cut resistance, tear and perforation are required, such as packaging, assembly, the automotive industry, the glass and paper industry.
Cut resistant glove without seams with black silicon-free PU coating. The coating gives a good grip in work requiring good dexterity in dry conditions. The glove liner is a combination of HPPE, fiberglass and nylon, and has, dueto very dens knitting, a very high cut resistance. Usage: Situationswhere adhesion, cut resistance, tear and perforation are required, suchas packaging, assembly, the automotive industry, the glass and paper industry.
These durable and comfortable gloves are made of water repellent cowgrain leather. Driver Hydro has a perfect fit, high tactility and reinforced seams along the fingers.
Gloves made of sturdy, top-quality cowgrain leather. Driver Vachette has a perfect fit, reinforced seams along the fingers and high tactility.
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff. Attractive, highly visible look with yellow and b lue stripes. Available in: yellow/blue.
Robust gloves made of sturdy cowgrain leather, with a 9 cm cotton protective cuff and palm reinforcement. Attractive, highly visible look with yellow and blue stripes. Available in: yellow/blue.
Pigskin leather gloves for light work. The glove has elastic on the outside and durable reinforcement of the seams, knuckles, fingertips and wrist. Pisa Nerf version: with a grain leather palm and cotton fibre backing. 6 cm protective cuff.
Goat leather gloves of standard quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver EC (standard quality) and Driver (super quality).
Goat leather gloves of top quality with cotton back and reinforced seams. A perfect fit and high tactility make these gloves a real favourite. Tropic is available in two versions: Tropic (top quality) and Tropic EC (standard quality).
