BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Disposable ABEK gas filter made of plastic with rubber mouthpiece and nose bridge. Provides protection against organic and inorganic vapours, solvents, sulphur dioxide, acidic gases, ammonia and organic ammonia derivatives. Working time: at least 5 minutes. Packaged in plastic box with belt-or clothing clip. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Shelf life: four years (temeratures between -5°C to 50°C and humidity 90%).
A1BE2K1/CO/NO/HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, toxic dust, vap our and smoke particles, nitrous gases and (to a limited extent) carbon monoxide. Only for use with full face masks with standard th reads. BE filter of class 2: for max. concentration of 0.5 %. AK filter of class 1: for max. concentration of 0.1%.
ABEK2HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling poin t >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %. S uitable for: processes involving chemical risks. Weight: 370g.
ABEK2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >6 5 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Only for use with full face masks with sta ndard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry str ap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coup ling.
ABE2K1 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point > 65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentrati on of 0.1%.
AB2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C. Can be used in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0. 5 %.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with ha lf and full face masks with standard threads.
Full-face mask Basic Plus is the economical version of full-face mask 3S. Mask made of very comfortable, high-quality rubber. Antifo g visor made of acetate, provides wide field of vision (80 %). Speech is conveyed via exhalation valve located just above the filter connection. The headband is easily adjustable, no carry strap for hanging the mask around the neck. Fitted with standard EN 148 thr eaded connection for filters or air hoses with matching coupling.
ABE2K1P2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, plus dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K f ilter of class 1: for max. concentration of 0.1%.
Carry bag for full face mask 3S. With handy shoulder strap. Ideal for dust-free storage of full face mask and filter. Dimensions: 295mm x 200mm x 295mm.
Escape mask (halfface) with ABEKP2 filter. Protects against organic and inorganic gases, solvents, sulphur dioxide, acidic gases, am monia, organic ammonia derivatives and toxic dust, mist and smoke particles. Easy to put on. Working time: at least 15 minutes. Pack aged in plastic box for belt or wall attachment. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosp here. Shelf life: four years.
ABE2K1HgP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentration of 0.1%.
AX screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 260g.
New generation demand valve with quick-coupling for compressed air apparatus. Demand valve that responds to lung demand very quickly and comfortably and switches to overpressure automatically upon the first breath. Maintains a constant overpressure of 3.9 mbar in the full face mask to prevent inwards leakage. For use in combination with full face masks 3S-Maxx and Ultra Elite Maxx as well as with G1 Maxx.
PPE with CE - mark of class 3.
Full face mask G1 with rubber headgear, successor to Ultra Elite mask, light, compact with wide field of vision on pc coated lens, and neckband. Improved air flow in the mask. Size medium, other sizes available on request, quick coupler, adjustable headgear, fully serviceable with voice membrane.
A2P3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65 °C, plus toxi c dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Black pouch on a belt to wear around the waist and easily transport the miniscape escape filter. Weight: 45g. No PPE.
Leather belt to link the connection hose from the demand valve to the compressed air hose coming from the filter system in order to prevent the mask from being pulled off. Couplers to be ordered separately.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate with silicate coating, provides very wide field of vision (95 %). Speech is conveyed via the speech membrane, which provides clear speech transmission. Speech membrane is positioned so the filter is not in front of it. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupling. Also available order in size small or in silicone rubber.
Coupling to be installed on leather belt. Fitted with male and female quick-couplings and CEJN closure.
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 300g.
REAKTORP3 screw-on filter DIN 148 in aluminium housing. Protects against radioactive iodine, plus highly toxic dust, mist and smoke particles. For use in combination with half and full face masks with standard threads. Weight: 260g.
Compressed air device that supplies environmentally-independent air and overpressure to the full-face mask. Apparatus for work situations or interventions. Ergonomic basic backplate with shoulder and hip straps with shock absorbing lining and plastic buckles. Includes pressure reducer, pressure gauge, warning whistle to indicate low air, and cylinder connection. Thanks to unique hose technology, 3 functions are combined in 1 hose: pressure gauge, 2 connectors for lung demande valve and whistle signal (single line). To be combined with steel or composite air cylinder 6L(6.8L)/300BAR, regulator M1 and corresponding 3S Maxx or G1 Maxx masks not included. Working time: approx. 45 minutes. NPF: 50 ,000.
Mask made of skin-friendly silicone rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speech is con veyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, includes a carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupli ng.
Compressed air bottle in composite 6.8l/300bar with tap. Content 2040L breathing air. Can be mounted on all compressed air, except the BD mini. Can also be mounted on small compressed air carriage. Weight: 4.2kg. Supplied unfilled and with test certificate. Recertification required every five years. Service life 15 years. Equipped with outflow safeguard.
Escape hood with COP2 filter, provides protection against smoke from fire, among other things. Easy to put on, even for people who wear glasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in sealed two-part wall box. Dimensions: h x w x d 28.5 x 15.5 x 12.5. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, includes a car ry strap for hanging the mask around the neck. Features click connection for demand valve with quick-coupling Automaxx-AS.
-For breathing apparatus, 6,8L cylinder, mounted mask and demand valve -Outer dimensions: 700x300x520mm -Weight: 4,8 Kg
Breathing apparatus M1 basic with fixed lung demand valve, and basic backplate, harness without padding, classic line, manometer. To combine with masks 3S Maxx, or G1 Maxx, and for use with 6L(6,8L)/300BAR cilinders. Weight without ciilinder: ca 4,63 kg. working time: ca 45 min. NPF: 50.000.
Black compressed air hose, 20 m, rubber. Extremely robust hose for extreme conditions, hose does not collapse even if a forklift truck is driven over it. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Fitted with male and female RECTUS 96 safety quick-couplings.
Evacuation hood with full-face mask in overpressure, for potentially high concentration gas leaks, no degradation of components by H2S, on compressed air 2L-filled composite bottle, working time 15 min. Can be used in the event of oxygen deficiency. Can be maintained. Weight: 4.7 kg.
Escape hood on compressed air for very toxic conditions and/or places where can be a lack of oxygen. The escape mask consists of a hood with an integrated rubber half-mask. The bag contains a 3 litre, 200 bar metal filled air cylinder. As soon as the bag is opened, the breathing air is automatically activated. While wearing the mask, the user sees a continual indication of the amount of escape time that remains. Bag can be used to carry escape set while it is closed or opened. Working time: at least 15 minutes. Weight: 6 kg. Flow rate: approx. 35 l/min.
Full face mask G1 with Maxx connection and F1 helmet adadpters, and visor anti-scratch treated, successor to Ultra Elite mask, light, compact with wide field of vision. Improved air flow in the mask. Sizes: small, medium and large. Fully serviceable with voice membrane.
Carrying case for Ultra Elite masks. Equipped with a handy shoulder strap. Ideal for the filter and mask to protect against dust. Dimensions: 318mm x 180mm x 232mm.
Closet for breathing apparatus with one cylinder (up to 6,8l), aparatus can be put in the closet ready for use. For mural fixation. Dimensions: L:89cm,W:49cm,H:35cm. Weight: 5,7kg No PPE.
Welding lens attachment for 3S full face masks. Spatter and welding lenses not included. Dimensions: 90 x 110 mm.
Adaptor to "park" lung demand valve Automaxx AS when not in use. Can be fixed on belt of bretahing apparatus.
Fire resistant rescue hood that can be connected to the second terminal of a compressed air device. Once connected to the blower, the victim is supplied with fresh air. Visor treated against fogging. Is stored in a fire retardant and waterproof bag.
Oxygen producing breathing apparatus with closed stainless steel carrying box with carrying belt. For very hazardous circumstances a nd/or places where a lack of oxygen may develop. Stored in a hermetically sealed, stainless steel carry bag with a strap for carryin g it over the shoulder. Works using an oxygen generating KO2 cell that can be replaced once it is used. KO2 cell is activated by fir st exhalation, responds to moisture and CO2 in exhaled air. Very maintenance-friendly, only requires annual test of seal. Working ti me: at least 90 minutes at consumption of 30 l/min. (escape), 300 minutes at consumption of 10 l/min. (rest). Shelf life: ten years. Weight: 4.9 kg.
Black compressed air hose, 10 m, rubber. Extremely robust hose for extreme conditions, hose does not collapse even if a forklift truck is driven over it. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Fitted with male and female RECTUS 96 safety quick-couplings.
Y-piece for installation on compressed air hose, with one male and two female couplings. With non-return valve, makes it possible to split 1 hose into 2 hoses. Fitted with Rectus 96 couplings (NOT compatible with Rectus 96 short of lung demand valves).
Black compressed air hose, 5 m, rubber. Extremely robust hose for extreme conditions, hose does not collapse even if a forklift truck is driven over it. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Fitted with male and female RECTUS 96 safety quick-couplings.
Escape hood with COP2 filter, provides protection against smoke fromfire, among other things. Easy to put on, even for people who wearglasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in bag to be combined with belt. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
Communication adaptor for 3S-P mask.
Device that is used as a separate compressed air unit or combined with a long-term valve (supplied) to serve as a backup when working on the compressed air network. Including 3S mask and regulator. With emty 2L composite bottle (15 minutes).
Carrying harness consisting of two shoulder straps and one hip belt to comfortably carry SSR30/100 B on the body in both the unopene d and opened position.
Changeover valve or automatic changeover valve for work that requires use of compressed air for breathing and where an interruption of the air supply could be life threatening. Changeover valve with one connection for air hose from compressed air line and one conn ection for air hose from compressed air apparatus. Primary source is the compressed air line and secondary source is the compressed air apparatus that functions as a backup if the supply from the air line is cut off. When the device is switched from the primary to the secondary source, a whistle sounds. For use with BD Mini, DB 96 and Airmaxx compressed air systems.
Trainer self-rescue set SSR 30/100 and SSR30/100 B.
Welding lens attachment for Ultra Elite full face masks. Spatter and welding lenses not included. Dimensions: 90 x 110 mm.
Adapter for mounting communication on Eltra Elite mask.
Bag to provide victim with air. Compressed air bottle of 6-6.8 or 9L to be ordered separately. Connection for mask with regulator (to be ordered separately) for victim. Easy-to-read pressure gauge to indicate level of the remaining air. With extra compartment for accessories. Dimensions: H: 29cm, L: 75cm, W: 17cm. Weight with Single Laine <(><<)>(><(><<)><(> <<)>)> 6 kg.
