BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Coverall, 65 gr/m² , microporous film laminate, lightweight, hood, elastic waist wrists and ankles, 3 thread over loch stitch.
Disposable coverall in polypropylene SMS with hood and two-way zip with zip flap. Model for general purpose applications. Three-thread overlocked seams and elastic hood, waist, ankles and wrists. Available in white and blue. Type 5-6.
Coverall in PE, laminated, yellow, chemical overall, for limited use.Protects against harmful chemical spatters and sprays. Model wi thstitched and taped seams, two times zipper under flap, with hood andelastic at the wrists and ankles, reinforcement at the knees. Suitablefor: chemical and petrochemical industries, pharmaceutical industry, waste collection and processing, tank cleaning, emergency response services, all activities involving risk of contamination with less aggressive chemicals. Sizes: S - XXXL.
Coverall, 50gr./m² polyester viscose rayon mix, firming nylon film on the inside, non-woven, flame retardant, limited use, to wear above heat- insulating clothing, 3-thread overlock seams, offers protection against hazardous dust and dirt. Available in: Blue.
Coverall, non-woven, limited use, flame retardant, chemical resistant coating, antistatic, hood with elastic, double zip closure withdouble flap, elastic at wrists and ankles. Available in: grey, orange.
Coverall, 63gr./m², microporous fim laminated, good moisture vapour transmission, three-piece hood, antistatic, elastic at hood, elastic at wrists, elastic at ankles, elastic at waist, zip closure under flap, 3- threads overlock and taped, breathable back in Safegard blue. Available in: white.
Coverall, laminated, white, chemical overall for limited use, with a Saranex 23P barrier film. Protects against hazardous chemical spattersand sprays. Model with stitched and taped seams, two times zipper underflap, with hood and elastic at the wrists and ankles, reinforcement onthe knees.
Labcoat in Micromax NS fabric. Collar with four front fastening studs and two hip pockets. EMN101 - 97.20cm length, 62gsm microporous polyethylene film / spunbond PP laminate, Three thread overlock stitch.
Coverall, 65 gsm microporous film laminate, with 55 gsm SMMS polypropylene back panel, covered over by the microporous film laminate. with Hood, elastic waist wrists and ankles, Taped seams. White with orange panel on the back.
Coverall in PE, laminated, yellow, chemical overall, for limited use.Protects against harmful chemical spatters and sprays. Model with stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, Safegard Panel on backside.
Coverall Micromax TS with Tape sealed seams, Elastic face, Elastic wrists and ankles, Storm flap over zipper, Sealed seams, Elasticated hood, waist, cuffs and ankles and "Super B" pattern. Available sizes: S-3XL. Available colours: White.
Lightweight and flexible chemical suit designed specifically for protection against Ebola and other viruses. Combines Type 3 <(>&<)> 4 design with the infectious agent protection of a barrier film and stitched and taped, fully sealed seams.
Coverall, laminated, for limited chemical use, composed of variouscomposite layers, including the highly protective EVOH layer. Protects against hazardous chemicals in spray and liquid form. Grey version hasstitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, reinforcement on the knees, attached boots with boot overflaps, double cuffs, double zip closure and storm flap front fastening.
Lightweight gas suit in highly chemical-resistant Interceptor material consisting of 10 layers. Gas-tight, semi-disposable suit: if not contaminated and after pressure test, the suit is reusable. Pressure gauge is worn on the inside. With boot socks, cuffs with glove adapters fitted with Silvershield inner gloves and neoprene outer gloves. Can be kept for 10 years without using with recommendation to perform an annual pressure test. Sizes: S-3XL. Type1aET